Models for the Development of Sortpion Isothems: A Review

Sunday Ibe Iji¹, Uwem Ekwere Inyang^1, and Benjamin Reuben Etuk¹

¹Department of Chemical Engineering Faculty of Engineering University of Uyo, Uyo Akwa Ibom State Nigeria

Cite this paper:
Sunday Ibe Iji, Uwem Ekwere Inyang and Benjamin Reuben Etuk. Models for the Development of Sortpion Isothems: A Review. American Journal of Food Science and Technology. 2025; 13(2):27-37. doi: 10.12691/ajfst-13-2-2

Abstract

Moisture sorption isotherms are fundamental for understanding the relationship between water activity and moisture content in food materials, directly impacting the design and optimization of drying, storage, and preservation processes. This review comprehensively evaluates sorption models, categorizing them into empirical, semi-empirical, theoretical, statistical physics-based, hybrid, and machine learning-based approaches. Empirical models, such as BET and GAB, remain widely used due to their simplicity and broad applicability across various food classes. However, these models often lack mechanistic insights, limiting their accuracy for complex or heterogeneous foods. Theoretical and statistical physics-based models provide deeper understanding of molecular sorption mechanisms but involve increased complexity and parameterization challenges. Recent advancements in hybrid and machine learning models demonstrate the potential to integrate physical laws with data-driven approaches, improving predictive performance and adaptability, particularly for novel and composite food matrices. Key challenges in model application include accurate model selection, robust parameter estimation, accounting for temperature dependency, and multi-component sorption phenomena. Moreover, data quality and limited experimental datasets often constrain model reliability. Emerging trends suggest that integrating physics-informed machine learning, real-time sensor data, multi-scale modeling, and digital twin technologies will enhance model robustness and facilitate real-time process control. Recommendations highlight the importance of selecting sorption models aligned with specific food types and processing requirements, employing rigorous fitting techniques, and combining mechanistic and data-driven approaches for optimal balance between accuracy and interpretability. Continued advancements in sorption isotherm modeling are expected to support sustainable, energy-efficient food processing and improve product stability and quality, addressing growing industry demands.

Keywords:
Sorption Isotherm Water activity Moisture Content Equilibrium Moisture content Sorption Model

This work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

References:

[1]	Alaqarbeh, M. (2021). Comparative evaluation of adsorbents in water purification: A comprehensive overview. Environmental Science and Pollution Research, 28(19), 24160 – 24178.
[2]	Mubarak, N. M. and Arab, M. (2023). Recent trends in the use of functionalized adsorbents for water purification. Environmental Nanotechnology, Monitoring and Management, 20, 100729 - 100750
[3]	Nwadiogbu, J. O., Ajiwe, V. I., and Okoye, P. A. (2020). Adsorption mechanisms—A review. International Journal of Environmental Science and Technology, 17, 271 – 288.
[4]	GonzálezGonzález, C. R., MedinaMorales, M. A. and MendozaCastro, R. (2022). Advances in adsorption mechanisms of heavy metals on modified biochars. Journal of Environmental Chemical Engineering, 10(1), 106979 - 106990.
[5]	Yousef, R. I., Nabih, H. I. and Ahmed, A. M. (2020). Sustainable adsorption techniques for wastewater treatment: A comparative review. Journal of Environmental Management, 258, 110050 - 110070.
[6]	Dąbrowski, A. (2001). Adsorption—from theory to practice. Advances in Colloid and Interface Science, 93(1–3), 135 – 224
[7]	Ruthven, D. M. (2023). Principles of adsorption and adsorption processes (Revised ed.). Wiley.
[8]	Ahn, J. Y., Lee, J. H., Lee, S. M. and Lee, S. Y. (2021). Adsorption applications in food quality and safety: A review. Food Engineering Reviews, 13(2), 122 – 139
[9]	Singh, N. K., Meena, R. K., and Sinha, D. (2023). Recent advances in adsorption technologies for food and beverage industries. Trends in Food Science and Technology, 132, 241 - 252.
[10]	Khan, M. A., Karim, M. A. and Hawlader, M. N. A. (2022). Experimental investigation and modeling of sorption isotherms of selected food materials. Drying Technology, 40(6),1041 – 1052.
[11]	Zhou, J., Zhang, D., and Xu, Y. (2023). Machine learning in food drying kinetics: A focus on GA-optimized predictive models. Computers and Electronics in Agriculture, 208, 107779 - 107790
[12]	Aviara, N. A., Ajibola, O. O., and Oni, D. O. (2006). Sorption isotherms of sweet potato and yam tubers. Journal of Food Engineering, 73(2), 157 – 163.
[13]	Fasina, O. O., Akintunde, T. Y. and Oyelade, O. J. (2021). Modelling the moisture sorption characteristics of cassava flour. Journal of Food Science and Technology, 58(1), 60 – 70.
[14]	Prasat, P., PoomsaAd, N., and Prachayawarakorn, S. (2014). Moisture sorption isotherms and quality characteristics of vacuumfried durian chips. Drying Technology, 32(9), 1112 – 1120
[15]	Foo, K. Y., and Hameed, B. H. (2010). Insights into the modeling of adsorption isotherm systems. Chemical Engineering Journal, 156(1), 2 – 10.
[16]	AlGhouti, M. A., and Da’ana, D. A. (2020). Guidelines for the design of adsorption processes for the removal of organic pollutants from wastewater using activated carbon: Role of the adsorbate’s nature. Journal of Environmental Management, 242, 210 – 226.
[17]	Ricardo, C. P., Melo, E. A., and Lima, V. L. (2011). Moisture sorption isotherms of fruit powders: A review. Food Reviews International, 27(3), 239 – 250.
[18]	AlMuhtaseb, A. H., McMinn, W. A. M., and Magee, T. R. A. (2004). Water sorption isotherms of starch powders: Part 1: Mathematical description of experimental data. Journal of Food Engineering, 61(3), 297 – 307
[19]	Yan, Z., Zuo, Z. and Wang, W. (2008). Simplification of sorption isotherm equations and evaluation of their prediction performance. Journal of Food Engineering, 88(1), 146 –154.
[20]	Rahman, M. S. (2022). Water activity in food preservation and safety: Past, present and future. Journal of Food Science, 87(4), 1234 -1247.
[21]	Roos, Y. H. (1995). Glass transition-related physicochemical changes in foods. Food Technology, 49(5), 97 – 102
[22]	Marcolla, C. S., TelisRomero, J., and Gabas, A. L. (2020). Water activity and sorption isotherms of food: Importance and implications. Journal of Food Science and Technology, 57(12), 4481 – 4493
[23]	Sahu, J. K. and Das, H. (2010). Moisture sorption characteristics of food materials. In H. Das (Ed.), Drying technologies for foods, 1,  89 – 112.
[24]	Mathlouthi, M. and Rogé, B. (2003). Water vapour sorption isotherms and the c parameter of the GAB equation: A critical examination. LWT – Food Science and Technology, 36(1), 95 – 101.
[25]	Beuchat, L. R. (2023). Influence of water activity on growth, metabolic activities, and survival of microorganisms. In M. S. Rahman (Ed.), Handbook of Food Preservation (3rd ed., pp. 327 –350).
[26]	Jideani, V. A. and Mpotokwana, S. M. (2009). Modeling of water absorption of Botswana bambara varieties using Peleg’s equation. Journal of Food Engineering, 92(2), 182 – 188.
[27]	TelisRomero, J., Marcolla, C. S. and Gabas, A. L. (2010). Sorption isotherms and thermodynamic properties of mango pulp powder. Journal of Food Engineering, 97(4), 541 – 548.
[28]	Timmermann, E. O., Chirife, J. and Iglesias, H. A. (2001). Water sorption isotherms of foods and foodstuffs: BET or GAB parameters? Journal of Food Engineering, 48(1), 19 – 31.
[29]	Abano, E. E., and SamAmoah, L. K. (2011). Effects of different pretreatments on drying characteristics of banana slices. Journal of Engineering and Applied Sciences, 6(2),121 –129.
[30]	AlMuhtaseb, A. H., McMinn, W. A. M., and Magee, T. R. A. (2002). Moisture sorption isotherm characteristics of food products: A review. Food and Bioproducts Processing, 80(2), 118 – 128.
[31]	Sari, B. (2005). Moisture sorption isotherms and monolayer moisture content of Turkish delight. Food Research International, 38(8), 931 - 936.
[32]	Bell, L. N. and Labuza, T. P. (2000). Moisture sorption: Practical aspects of isotherm measurement and use (2nd ed., pp. 1 –105). St. Paul, Minnesota, USA: AACC International.
[33]	Swaminathan, V., and Kildsig, D. O. (2001). Moisture sorption isotherms of pharmaceutical excipients. Pharmaceutical Development and Technology, 6(2), 191 - 201.
[34]	Rahman, M. S. (2009). Food properties handbook (2nd ed.). Boca Raton, FL, USA: CRC Press.
[35]	Telis, V. R. N., Gabas, A. L. and TelisRomero, J. (2020). Water activity and sorption isotherms: Application in food dehydration and stability. In S. A. Bhandari et al. (Eds.), Handbook of Food Processing, Wiley, 1, 309 - 328.
[36]	Içier, F., and Baysal, T. (2015). Moisture sorption isotherms of food materials. In Engineering Properties of Foods (pp. 529 – 552).
[37]	Santos, D. F., Siqueira, A. M. F., and Fontan, R. C. (2022). Recent advances in sorption isotherm modeling for food products: Monolayer, multilayer and hysteresis behavior. LWT – Food Science and Technology, 154, 112762 - 112800.
[38]	Andrade, R. D. P., Lemus, R. M., and Pérez, C. E. A. (2011). Sorption isotherms and isosteric heat of passion fruit pulp powder. Revista Brasileira de Produtos Agroindustriais, 13(1), 43 – 52.
[39]	Jaya, S. and Das, H. (2009). Analysis of moisture sorption isotherms for food modeling. Journal of Food Engineering, 93(2), 136 – 146
[40]	Rizvi, S. S. H. (2005). Thermodynamics of foods and biological materials. In S. S. H. Rizvi (Ed.), Engineering properties of foods (3rd ed., pp. 1–76). Boca Raton, FL: CRC Press.
[41]	Brunauer, S., Emmett, P. H., and Teller, E. (1938). Adsorption of gases in multimolecular layers. Journal of the American Chemical Society, 60(2), 309 – 319.
[42]	Arévalo-Pinedo, A., and Resende, O. (2020). Moisture sorption isotherms of fruits and vegetables: An updated review. Food Engineering Reviews, 12, 102 – 115.
[43]	Zamora, M. C., and Chirife, J. (2018). Moisture sorption isotherms and isosteric heat of foods and food components: Historical perspectives and future directions. Food Chemistry, 262, 26 – 30.
[44]	Gupta, R. and Singh, J. (2023). Machine learning approaches in modeling food moisture sorption isotherms: A review. Trends in Food Science and Technology, 135, 47 – 59
[45]	Zhang, H., Yuan, J., and Wu, L. (2022). Hybrid sorption models for processed food and dried fruits. Journal of Food Structure and Function, 9(1), 35 – 45.
[46]	Shimizu, S. and Matubayasi, N. (2023). Thermodynamic and statistical physics perspectives on sorption isotherms. Journal of Physical Chemistry B, 127(11), 2569 – 2581.
[47]	Zeymer, J. S., Corrêa, P. C., Oliveira, G. H. H., Martins, M. A. and Resende, O. (2025). Thermodynamic properties of moisture sorption of soybean (Glycine max L.) grains. Acta Scientiarum. Agronomy, 47, 1 - 10.
[48]	Sinija, V. R., and Mishra, H. N. (2008). Moisture sorption isotherms and heat of sorption of instant (soluble) green tea powder and green tea granules, Journal of Food Engineering, 86(4), 494 – 500
[49]	Moraes, M. A., Rosa, G. S. and Pinto, L., A. (2008). Moisture sorption isotherms and thermodynamic properties of apple Fuji and garlic. International Journal of Food Science and Technology, 3(10), 1824 - 1831.
[50]	Romero Hernández, F., González, M. and Vega, M. (2025). Freundlich model. Food Moisture Journal, 18(2), 45 – 55.
[51]	CollazosEscobar, L. M., HernándezRojas, M. L., and Gómez, A. (2025). Machine learningbased prediction of food sorption behavior using SVM and RF. Journal of Food Modeling, 8(1),22 – 31.
[52]	Kumar, A., Rai, R. and Sharma, M. (2021). Modeling moisture sorption isotherms using artificial neural networks and conventional models. Journal of Food Process Engineering, 44(2), 1 – 20
[53]	Shafaei, M., Keshavarz, M. and Ghaffari, M. (2023). Assessment of water absorption characteristics for improved sesame (Sesamum indicum L.) varieties during hydration. Food Bioengineering, 10(2), 120 – 130
[54]	Castillo, M. D., González, H. H. L., Martínez, E. J., Pollio, M. L. and Resnik, S. L. (2003). Study of mathematical models applied to sorption isotherms of Argentinean black bean varieties. Journal of Food Engineering, 60(3), 343 – 348
[55]	Lima, E. S., Alves, C. F. and Santos, R. P. (2019). Temperature dependence of sorption isotherms for food products using semiempirical models. Food Chemistry, 276, 252 – 259.
[56]	Pinheiro, A. C., Bourbon, A. I., Cerqueira, M. A., Maricato, É., Nunes, C., Coimbra, M. A. and Vicente, A. A. (2012). Parameter estimation of GAB model for sorption isotherms in food. Journal of Food Engineering, 113(3), 371 – 379.
[57]	Raji, A., and Ojediran, O. (2011). GAB model. Journal of Food Engineering, 106(3),300 – 308.
[58]	Stahlfeld, J., and Belmont, L. (2023). Modified BET model. Advances in Adsorption Science, 17(4), 301 – 310.
[59]	Erika, K., Abass, O., Peter, M. R., Griffiths G. A. and Jennifer, C. A (2025). Modeling moisture sorption isotherms of milk powders at ambient conditions. Journal of Food Engineering, 2, 1 - 6.
[60]	Sahu, J. K. and Jha, S. N. (2017). Caurie model. Environmental Studies of Foods, 22(1), 45 –53.
[61]	Saniso, J. M., Obeta, M., and Ume, S. I. (2025). Modeling moisture sorption characteristics of fermented locust beans (Parkia biglobosa). Journal of Food Stability and Preservation, 12(1), 55 – 64
[62]	Corrêa, D., Santos, A. and Pereira, A. (2019). Chen–Clayton model for moisture sorption. International Journal of Food Science, 45(2), 100 – 109
[63]	Zhou, X., Deng, Y., and Jin, Y. (2023). Physics-informed neural networks for food moisture modeling. Journal of Food Data Science, 2(2), 87 – 96.
[64]	Kasper, J. C., Franks, F. and Karel, M. (1997). Theoretical models of moisture sorption isotherms. Advances in Food Research, 42, 163 – 210.
[65]	Cui, J., Niu, X., Feng, G., Han, Y. and Li, Z. (2021). Effect of division methods of the adsorption isotherm on the fractal dimension of clay minerals calculated based on the Frenkel–Halsey–Hill model. Energy and Fuels, 35(10), 8786 – 8798.
[66]	Burkhardt, J. B., Cadwallader, A., Pressman, J. G., Magnuson, M. L., Williams, A. J., Sinclair, G. and Speth, T. F. (2023). Polanyi adsorption potential theory for estimating PFAS treatment with granular activated carbon. Journal of Water Process Engineering, 53, 1 – 10. Elsevier B.V., Amsterdam, The Netherlands
[67]	Shimizu, S. and Matubayasi, N. (2023). Understanding sorption mechanisms directly from isotherms. Langmuir, 39(17), 6113 – 6125.
[68]	Chu, K. H., Hashim, M. A., Hayder, G. and Bollinger, J.-C. (2024). Comparative evaluation of the Dubinin–Radushkevich isotherm and its variants. Industrial and Engineering Chemistry Research, 63(34), 15002 – 15011.
[69]	Kontogiorgos, V. and Goff, H. D. (2006). Calorimetric and microstructural investigation of frozen hydrated gluten. Food Biophysics, 1(3), 202 – 215
[70]	Tsami, E., Maroulis, Z. B., Morunos-Kouris, D. and Saravacos, G. D. (1990). Heat of sorption of water in dried fruits, International Journal of Food Science and Technology, 25, 350 –359.
[71]	Ayawei, N., Ebelegi, A. N. and Wankasi, D. (2017). Modelling and interpretation of adsorption isotherms. Journal of Chemistry, Article ID 3039817, 1 – 11.
[72]	Do, D. D. (1998). Adsorption analysis: Equilibria and kinetics. London: Imperial College Press, pp. 489 – 535.
[73]	Li, Y., Zhang, B. and Zhao, Y. (2016). Development of theoretical multilayer sorption isotherm models considering energy heterogeneity for food materials. Food Chemistry, 211, 548 – 555.
[74]	Jaya, S. and Das, H. (2009). Analysis of moisture sorption isotherms for food modeling. Journal of Food Engineering, 93(2), 136 – 146.
[75]	Mathlouthi, M. and Rogé, B. (2003). Water vapour sorption isotherms and the caking of food powders. Food Chemistry, 82(1), 61 – 71
[76]	Elqahtani, M. A., AlGhamdi, M. A., and Rahman, M. S. (2021). Multilayer sorption model based on statistical physics for date fruits. Journal of Food Engineering, 292, 110265 -110270.
[77]	Dutcher, C. S., Hart, J. K. and Tran, B. (2022). Guggenheim statistical thermodynamics in food moisture sorption. Food Biophysics, 17(2), 221 – 234.
[78]	Lozano-Álvarez, J. A., González, R. and Carrillo, J. (2021). Application of cooperative binding models in food sorption. Food Biophysics, 16(3), 239 – 249.
[79]	Von Gemmingen, R. (2005). Fermi–Dirac statistics applied to food sorption. Journal of Food Engineering, 71(3), 317 – 321
[80]	Martinez, G. E., Contreras, C. and Zamudio, A. (2014). Hybrid sorption models incorporating GAB and statistical concepts. Food Engineering Reviews, 6(1), 1 – 11.
[81]	Wang, L., Li, X. and Zhang, Q. (2020). Integrating GAB and machine learning for sorption modeling in snacks. Journal of Food Engineering, 279, 109964 - 109970.
[82]	Brandani, F., Zhang, X. and Liu, Y. (2025). Redlich–Peterson hybrid sorption isotherm applied to complex foods. Journal of Food Thermodynamics, 17(1), 102 – 113.
[83]	de Vargas Brião, G., Hashim, M. A., and Chu, K. H. (2023). The Sips isotherm equation: Often used and sometimes misused. Separation Science and Technology, 58(5), 884 – 892.
[84]	Kim, J. H., Park, H. S., and Lee, J. H. (2020). Hybrid Henry–Sips model in food moisture isotherm. Journal of Food Preservation, 44(6), 10 - 15.
[85]	Verheijen, J., Brouwer, A., and de Jong, E. (2023). Comparative analysis of Tóth and Temkin models in multicomponent food systems. Journal of Food Physics, 12(1), 47 – 60
[86]	Amrutha, B., Kumar, A. and Singh, S. (2023). Hybrid modeling of sorption behavior in food matrices. Drying Technology, 41(2), 237 – 249
[87]	Stavarache, C., Popescu, G. and Isopescu, R. (2023). Application of Dubinin–Radushkevich isotherm in food sorption. Food Research International, 163, 112124 - 112166.
[88]	Yang, W., Chen, L., and Zhao, Y. (2024). Machine learning frameworks for sorption capacity prediction in complex food systems. Food Engineering Reviews, 16(2), 193 – 210.
[89]	Zhou, W., Li, M., and Zhang, L. (2023). Data-driven prediction of sorption isotherms in food systems using machine learning. Food Chemistry, 404, 134662 - 134700.
[90]	Ball, D., Kumar, A., and Sahu, J. K. (2022). Artificial neural networks in food dehydration modeling: A review. Journal of Food Process Engineering, 45(3), 507 - 516.
[91]	Petković, S., Marković, M. and Đorđević, V. (2025). Graph neural networks for moisture adsorption prediction in heterogeneous systems. Food Data Science Journal, 3(1), 41 – 54.
[92]	Jaffari, S., Akhtar, N. and Saeed, M. (2023). Predictive modeling of food drying using RF, XGBoost, and kNN. Drying Technology, 41(5), 591 – 603.
[93]	Udomkun, P., Nagle, M., and Müller, J. (2020). Modeling of drying and sorption behavior of biofortified cassava using RBFNNs. Food and Bioproducts Processing, 122, 233 – 243
[94]	Singh, R., Kumar, P., and Sharma, N. (2021). Long shortterm memory models for food sorption kinetics. Journal of Food Science and Technology, 58(6), 2259 – 2270.
[95]	Greff, K., Srivastava, R. K., Koutník, J., Steunebrink, B. R. and Schmidhuber, J. (2015). LSTM: A search‑space odyssey. IEEE Transactions on Neural Networks and Learning Systems, 26(10), 2592 – 2607.
[96]	AlMahasneh, M. A., Rababah, T. M. and Yang, W. (2012). Prediction of food properties using ANFIS models. Journal of Food Engineering, 109(3), 669 – 675.
[97]	Chipman, H., George, E. and McCulloch, R. (2010). BART: Bayesian additive regression trees. Annals of Applied Statistics, 4(1), 266 – 298.