Synthesis and Characterization of Nickel Doped Tin Oxide Nanoparticles by Hydrothermal Method

Satya Prakash Bharti¹ and Ekta Singh, Utkarsh Kumar^1,

¹Department of Applied Physics, Babasaheb Bhimrao Ambedkar University, Lucknow, India

Cite this paper:
Satya Prakash Bharti and Ekta Singh, Utkarsh Kumar. Synthesis and Characterization of Nickel Doped Tin Oxide Nanoparticles by Hydrothermal Method. Nanoscience and Nanotechnology Research. 2017; 4(3):115-119. doi: 10.12691/nnr-4-3-5

Abstract

Present paper deals with the synthesis of nickel doped tin oxide by sol-gel method. As we increase the doping of nickel the decrease in bandgap take place.

Keywords:
sol-gel nanotechnology hydrothermal

This work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

References:

[1]	Hornyak, Gabor L., et al. Introduction to nanoscience. CRC press, 2008.
[2]	Pillai S O. Solid State Physics: Structure and Electron Related Properties. Wiley Eastern Limited, 1994.
[3]	"Nickel ¨C Handbook of Mineralogy" (PDF). Hand book of mineralogy. org. Retrieved 2016-03-02.
[4]	J. Zhang and L. Gao, J. Solid State Chem. 177 (2004) 1425.
[5]	M. Batzill and U. Diebold, Progress in surface Science. 79 (2005) 47.
[6]	H. Zhang, N. Du, B. Chen, T. Cui and D. Yang, Materials Research Bulletin.43, (2008), 3164.
[7]	J. Pena, J. Perez-Pariente and M. Vallet-Regi, J. Mater. Chem. 13, (2003), 2290.
[8]	H. Zhu, D. Yang, G. Yu, H. Zhang and K. Yao, Nanotechnology 17, (2006), 2386.
[9]	F. Du, Z. Guo and G. Li Materials Letters 59, (2005), 2563.
[10]	S. V. Manorama, C. V. Gopal Reddy and V. J. Rao, Nanostruct. Mater. 11, (1999), 643.
[11]	L. Fraigi, D.G. Lamas and N.E.W. Reca, Nanostruct. Mater. 11, (1999), 311.
[12]	D. Davazoglou, Thin Solid Films. 302 (1997) 204.
[13]	13 Y. Liu, F. Yang and X. Yang, Colloids and Surfaces A. 312, (2008), 219.
[14]	Deshpande NG, Gudage YG, Sharma R, Vyas JC, Kim JB, et al. Studies on tin oxide-intercalated polyaniline nanocomposite for ammonia gas sensing applications. SensActuat B- Chem 138, (2009), 76-84.
[15]	Krivetskiy V, Ponzoni A, Comini E, Badalyan S, Rumyantseva M, et al. A selectivity modification of SnO2- based materials for gas sensor arrays. Electroanalysis 22, (2010), 2809-2816.