Rotation Time Optimization of FDDI Networks

Harsimranjot jassal^1, , Hardeep Singh Saini² and Amit Wason³

¹Singhania University, Jhunjhunu, Rajasthan, India

²Indo Global College of Engineering, Mohali, Punjab, India

³Hindustan Institute of Technology &Management, Ambala, Haryana, India

Cite this paper:
Harsimranjot jassal, Hardeep Singh Saini and Amit Wason. Rotation Time Optimization of FDDI Networks. Journal of Optoelectronics Engineering. 2013; 1(1):14-18. doi: 10.12691/joe-1-1-3

Abstract

The Fiber Distributed Data Interface can be implemented as a higher speed version of a token ring and is designed to work over fiber. This standard is also designed primarily for peer-to-peer communications but can certainly be used for the polled traffic modem. In this paper, the techniques and the rules which should be followed so as to optimize the performance of the FDDI networks have been discussed. The response time of the FDDI systems is dependent upon the transition delay and propagation delay. The transition delay can be decreased by increasing the bandwidth and propagation delay can be decreased by increasing the group velocity.

Keywords:
efficiency frame time ring latency token time TTRT value

This work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

Figures

References:

[1]	ANSI Standard X3T9.5, FDDI token ring media access control, 1998.
[2]	ISO 9312-2: 1989 (E), Information processing system (Fiber Distributed Data Interface), Part 2; Token Ring Media Access Control (MAC).
[3]	The Fiber Distributed Data Interface, Released by NSA on 12/01/2011.
[4]	F.E. Ross and E.B. William, “The Fiber Distributed Data Interface: A Proposal for a standard 100 Mbits Fiber Optic Token Ring Network”, Pre-publication draft: presented at FOC/LAN 1984.
[5]	R. Jain, “Performance Analysis of FDDI”, Digital Technical Journal, Vol.3, No.3, 1991.
[6]	H. Fred, “A Book on: Data Communications, Computer Networks, and Open Systems”, Addison-Wesley, 1996.
[7]	Token Ring/FDDI Networks: Network for Dummies; http://homepage.eircom.net/~emoloney/joehtml/token_ring.html
[8]	G. Kirov, “Fuzzy approach for FDDI network performance improvement”, Proceedings First IEEE Symposium on Intelligent Systems, Vol.3, pp.17-22, 2002.
[9]	J.A. Cobb, M. Lin, “On-time timed-token protocol”, Proceeding of IEEE Global Telecommunications Conference, Vol.3, pp.2255-2259, 2002.
[10]	M. Aljada, K. E. Alameh and K. A. Begain, “Performance analysis of Gb/s WDM FDDI network”, Photonics: Design, Technology, and Packaging II, Proc. of SPIE Vol. 6038, 60381L, 2006.
[11]	R.Jain, “Performance analysis of FDDI token ring networks: effect of parameters and guidelines for setting TTRT”, IEEE LTS Journals & Magazines, Vol.2, No.2, 1991.