Solar Power Potentiality Analysis in Some Regions of Bangladesh in the Case of Solar Irradiance

Suman Chowdhury^1,

¹Department of Electrical and Electronics Engineering, IUBAT-International University of Business Agriculture and Technology

Cite this paper:
Suman Chowdhury. Solar Power Potentiality Analysis in Some Regions of Bangladesh in the Case of Solar Irradiance. Journal of Optoelectronics Engineering. 2014; 2(2):46-49. doi: 10.12691/joe-2-2-5

Abstract

This paper analyzes the power characteristics of the PV cell in the case of solar irradiance. And it is also seen that a significant power change is occurred if the level of the series resistance is varied. Finally it is observed that Dinajpur is 9.67% more potential than Khulna and Chittagong in respect of solar irradiance. Also it is found that Dinajpur is 7.47% more potential than Dhaka.

Keywords:
solar energy solar irradiance fill factor PV cell series resistance

This work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

References:

[1]	M. Z. A. A. Kadir and Y. A. Rafeeu, “A review on factors for maximizing solar fraction under wet climate environment in Malaysia”, Renew. Sust. Ener. Rev., 2010, 14, 2243-2248.
[2]	A. O. Adelaja, O. Damisa, S. A. Oke, A. B. Ayoola and A. O. Ayeyemitan, “A survey on the energy consumption and demand in a tertiary institution”, Maejo Int. J. Sci. Technol., 2008, 2, 331-344.
[3]	Maurus H, Schmid M, Blersch B, Lechner P, Schade H: PV FOR BUILDINGS: Benefits and experiences with amorphous silicon in BIPV applications: reFOCUS 2004; 5 (6): 22-27.
[4]	Wong PW, Shimoda Y, Nonaka M, Inoue M, Mizuno M: Semi-transparent PV: Thermal performance, power generation, daylight modeling and energy saving potential in a residential application: Renewable Energy 2008; 33 (5): 1024-1036.
[5]	Goetzberger A, Hebling C, Schock HW: Photovoltaic materials, history, status and outlook: Materials Science and Engineering 2003; 40 (1): 1-46.
[6]	Muller A, Ghosh M, Sonnenschein R, Woditsch P: Silicon for photovoltaic applications: Materials Science and Engineering: B 2006; 134 (2-3): 257-262.
[7]	Luque, A., Hegedus, S.: Handbook of Photovoltaic Science and Engineering. John Willey & Sons Ltd., 2003.
[8]	Hanitsch, R., Etier, N., Heumann, K., Munschauer, M., Simulation and comparison of a tracked PV system with a model based on the measurement of the sky irradiance distribution, EuroSun98, 2nd ISES-Europe, Portoroz, Slovenia, 1998.
[9]	R. Muhida, M. Ali, P. S. J. Kassim, M. A. Eusuf, A.G.E. Sutjipto, and Afzeri, “A simulation method to find the optimal design of photovoltaic home system in Malaysia”, case study: a building integrated photovoltaic in Putra Jaya.
[10]	S. Thanakodi, “Modeling and simulation of grid connected photovoltaic system using MATLAB / SIMULINK”, Malaysia Nov.-2009.
[11]	H. L. Tsai, C. S. Tu, and Y.J. Su, “Development of generalized photovoltaic model using MATLAB/ SIMULINK” Proceedings of the World Congress on Engineering and Computer Science 2008, October 22-24, San Francisco, USA.
[12]	M. G. Villalva, J. R. Gazoli and E. R. Filho, “Comprehensive approach to modeling & simulation of photovoltaic arrays”, IEEE Transactions on Power Electronics, vol. 24, no. 5, May 2009.
[13]	J. Durago, “Photovoltaic emulator adaptable to irradiance, temperature and panel-specific I-V curves”, California polytechnic state university. June 2011.