Possibilities of Using Module Process Designer in the Production Processes

Peter Trebuňa^1, and Radko Popovič¹

¹Department of Industrial engineering and management, Technical University of Košice, Faculty of Mechanical Engineering, Košice, Slovakia

Cite this paper:
Peter Trebuňa and Radko Popovič. Possibilities of Using Module Process Designer in the Production Processes. American Journal of Mechanical Engineering. 2014; 2(7):188-190. doi: 10.12691/ajme-2-7-3

Abstract

By leveraging 2D/3D data and capturing and maintaining manufacturing process knowledge, Process Designer provides the means for manufacturers to develop and validate best manufacturing strategies within a 3D virtual environment. Complete line design and process modeling capabilities are available in Process Designer. Process engineers are able to model the process based on manufacturing resources that are captured in classified libraries. Required resources are dragged into the plan, and the sequence of manufacturing events can be checked for process bottlenecks and compared against actual throughput goals. Line balancing is also performed in this 3D environment by virtually aligning operations and stations to achieve an optimal production plan.

Keywords:
digital factory process designer production processes

This work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

References:

[1]	EDL, M., LERHER, T., ROSI, B. Energy efficiency model for the mini-load automated storage and retrieval systems. International Journal of Advanced Manufacturing Technology, 2013, č. 2013, s. 1-19.
[2]	KAVAN, M.: Výrobní a provozní management. Grada Publishing, Praha, 2002.
[3]	BÁRDY, M., KUDRNA, J., ŠRÁMKOVÁ, B., EDL, M. Interactive Game Supporting SMED Method. Applied Mechanics and Materials, 2014, roč. 474, č. 2014, s. 141-146.
[4]	KUDRNA, J., MILLER, A., EDL, M. Methods of industrial engineering in network organizations. In Creating Global Competitive economies - A 360-degree Approach. Milan: International Business Information Management Association (IBIMA), 2011. s. 2037-2042.
[5]	STRAKA, M., MALINDŽÁK, D.: Algoritmy kapacitného vyvažovania potlačových zariadení plánovacieho systému firmy Alfa Folie, a.s = Algorithms of capacity balancing of printing machineries for Alfa Foils, a.s. planning system, In: Acta Montanistica Slovaca. Roč. 14, č. 1, 2009, s. 98-102.
[6]	KLOS, S.: Metodyka poprawy efektywności wdrożenia systemu ERP w obszarze gospodarki materiałowej W: Inżynieria produkcji : technologia, informacja, zastosowania/ red. J. Jakubowski, S. Saniuk, R. Stryjski .- Zielona Góra : Oficyna Wydaw. Uniwersytetu Zielonogórskiego, 2007 - s. 101-112.
[7]	BALOG, M., STRAKA, M.: Application of the logistics principles for the company Omega, s.r.o. in crisis time, In: Acta Logistica. Roč.1, č. 1 2014, s. 17-21.
[8]	KOŠTURIAK, J., GREGOR, M.: Podnik v roce 2001 - revoluce v podnikově kultúře, Grada, Praha, 1993.
[9]	SANIUK S., SANIUK A., LENORT R., SAMOLEJOVA A.: Formation and planning of virtual production networks in metallurgical clusters, in: Metalurgija, R. 53, No 4/2014, p. 725-727.
[10]	KLIMENT, M., TREBUŇA, P.: Prínosy softvérového portfólia TECNOMATIX, jeho moduly a súčasti využívané pri modelovaní a simulovaní podnikových procesov a ich optimalizácii. In: Transfér inovácií. 2013, č. 25, s. 158-161. TREBUŇA P. – PEKARČÍKOVÁ M.: Supply and distribution logistics, Amos Ostrava 2013.
[11]	TREBUŇA P. – Fiľo, M. - PEKARČÍKOVÁ M.: Zásobovacia a distribučná logistika v príkladoch, Košice 2012.
[12]	TREBUŇA, P. - KLIMENT, M. - MARKOVIČ, J.: PLM and its benefits and use in the management of complex business activities in the planning and optimization of production activities / Peter Trebuňa, Marek Kliment, Jaroslav Markovič - 2013. In: Manažment podnikov. Roč. 3, č. 2 (2013), s. 53-56.
[13]	STRAKA, M., MIKUŠOVÁ, Z., LENORT, R.: Analysis and assessment of warehouse stock, In: Hutnické listy. Vol. 66, no. 3 (2013), p. 44-48.
[14]	FIĽO, M., PEKARČÍKOVÁ, M.: Contribution to the creation of the model warehouse management in the company, In: Manažment podnikov. Roč. 3, č. 2 (2013), s. 62-64.
[15]	ROSOVÁ, A., BALOG, M.: Specifikace logistických nákladů, In: Logistika v praxi. časť 14.5.4.4. srpen (2007), 6 p.
[16]	http://www.caxmix.cz/2012/07/02/tecnomatix-2-efektivni-planovani-vyrobniho-procesu/.
[17]	https://www.plm.automation.siemens.com/en_gb/Images/7456_tcm642-4941.pdf.