New Fully-Uncoupled Current-Controlled Sinusoidal Oscillator Employing Grounded Capacitors

D. R. Bhaskar¹, D. Prasad¹, R. Senani^2, , M. K. Jain³, V. K. Singh³ and D. K. Srivastava³

¹Department of Electronics and Communication Engineering, Faculty of Engineering and Technology, Jamia Millia Islamia, New Delhi, India

²Division of Electronics and Communication Engineering, Netaji Subhas Institute of Technology, Sector-3, Dwarka, New Delhi, India

³Department of Electronics Engineering, Institute of Engineering and Technology, Lucknow, India

Cite this paper:
D. R. Bhaskar, D. Prasad, R. Senani, M. K. Jain, V. K. Singh and D. K. Srivastava. New Fully-Uncoupled Current-Controlled Sinusoidal Oscillator Employing Grounded Capacitors. American Journal of Electrical and Electronic Engineering. 2016; 4(3):81-84. doi: 10.12691/ajeee-4-3-2

Abstract

A new electronically-controllable fully-uncoupled sinusoidal oscillator, employing four second generation current-controlled conveyors (CCCIIs) and two grounded capacitors, is presented. The oscillation frequency and condition of oscillation are totally uncoupled and electronically adjustable. The circuit has low sensitivities and a high frequency stability factor. SPICE simulation results confirm the validity of the proposed oscillators.

Keywords:
sinusoidal oscillator current mode circuits current controlled conveyors

This work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

References:

[1]	Fabre, A., Saaid, O., Wiest F.and Boucheron C., “Current controlled bandpass filter based on translinear conveyors”, Electronics Letters, 31(29), 1727-1728, September 1995.
[2]	Fabre, A., Saaid, O., Wiest F.and BoucheronC., “High frequency applications based on a new current controlled conveyor”, IEEE Trans Circuits Syst, 43(2), 82-91, February1996.
[3]	Kiranon, W., Kesorn, J. and Wardkein, P., “Current controlled oscillator based on translinear conveyors”, Electronics Letters, 32(15), 1330-1331, July 1996.
[4]	Kiranon, W., Kesorn, J., Sangpisit, W. and Kamprasert, N.,“Electronically tunable multifunctional translinear-C filter and oscillator”, Electronics Letters, 33(7), 573-574, March 1997.
[5]	Abuelma’atti M.T. and Tasadduq, N. A., “A novel current controlled oscillator using translinear current conveyors”, Frequenz, 52(5-6), 123-124, 1998.
[6]	Abuelma’atti M.T. and Al-Qahtani, M.A. “A new current controlled multiphase sinusoidal oscillator using two translinear conveyors”, IEEE Trans Circuits Syst–II, 45(7), 881-885, July1998.
[7]	Horng, J.W., “A sinusoidal oscillator using current-controlled current conveyors”, Int. J. Electronics, 88(6), 659-664, 2001.
[8]	Fongsamut,C., Anuntahirunrat, K., Kumwachara K.nd Surakampontorn, W.,“Current-conveyor-based single-element-controlled and current-controlled sinusoidal oscillators”, Int. J. Electronics, 93(7), 467-478, July 2006.
[9]	Maheshwari, S., “Current-mode third-order quadrature oscillator”, IET Circuits Devices Syst, 4(3), 188-195, 2010.
[10]	Bhaskar D. R. and Senani, R., “New CFOA-based single-element-controlled sinusoidal oscillators”, IEEE Trans Instrumentation and Measurement, 55(6), 2014-2021, December 2006.
[11]	Senani, R., Bhaskar D. R. and Singh, A. K., “Current Conveyors: variants, applications and hardware implementations”, Springer International Publishing, Switzerland, 2015, Ch. 8, pp. 395-423.
[12]	Senani, R., Bhaskar D. R. and Singh, A. K., “Sinusoidal Oscillators and Waveform generators using modern electronic circuit building blocks”, Springer International Publishing, Switzerland, Ch. 8, pp. 395-425, 2016.
[13]	Frey, D.R., “Log domain filtering: an approach to current-mode filtering”, IEE Proc. G., Circuits Devices Syst., 140(6), 406-416, December 1993.