Effects of Soil Properties and Geogrid Placement on CBR Enhancement of Lateritic Soil for Road Pavement Layers

Charles A. Adams^1, , Yaw Adubofour Tuffour¹ and Samuel Kwofie²

¹Department of Civil Engineering, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana

²Department of Materials Engineering, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana

Cite this paper:
Charles A. Adams, Yaw Adubofour Tuffour and Samuel Kwofie. Effects of Soil Properties and Geogrid Placement on CBR Enhancement of Lateritic Soil for Road Pavement Layers. American Journal of Civil Engineering and Architecture. 2016; 4(2):62-66. doi: 10.12691/ajcea-4-2-4

Abstract

The mechanism for strength development when unbound soils are reinforced with geogrid is not well understood. Research on geogrid reinforcement has tended to focus largely on improving the properties of the geogrid with little attention to the influence of soil properties on geogrid performance. This study investigated the effects of plasticity index and gradation properties of lateritic soils on strength enhancement within a soil-geogrid-reinforced composite for a pavement. Three samples of soil with different plasticity and gradation were compacted and tested in strength with and without geogrid reinforcement. Reinforcement involved incorporating one and two layers of geogrid into the sample at different depths within the compacted sample height. The effect of reinforcement, plasticity index and grading on strength enhancement of the compacted material was measured by CBR for soaked and unsoaked conditions. The results indicated that as soil plasticity increased, the CBR decreased. In addition, as the proportion of coarse aggregate particles in the soil increased, the CBR of the reinforced soil increased for all geogrid placement locations. Two-layer geogrid reinforcement only marginally improved strength over single layer reinforcement placed close to mid-depth of compacted sample. This seems to suggest that in some cases, single-layer rather than multiple-layer geogrid reinforcement may suffice provided the placement depth is appropriate.

Keywords:
CBR geogrid reinforcement laterite soil road pavement geosynthetic

This work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

References:

[1]	Giroud, J.P. (2009). “An assessment of the use of geogrids in unpaved roads and unpaved areas”, Proceedings of the Jubilee Symposium on Polymer Geogrid Reinforcement, Institution of Civil Engineers, London, UK, pp. 23-36.
[2]	Gidigasu, M. D. (1974). Degree of weathering in the identification of laterite materials for engineering purpose-a review. Engineering Geology, 8(3):213-266.
[3]	Madu, R. M. (1977). An investigation into the geotechnical and engineering properties of some laterites of Eastern Nigeria. Engineering Geology, 11(2):101-125.
[4]	Koerner, R.M. (2005). Designing with geosynthetics: Volume 1.Retrieved from: Amazon.com [Accessed 2 June, 2014].
[5]	Bergado, D.T. and Abuel-Naga, H. M. (2005). “Tsunami devastations and reconstruction with geosynthetics”.Retrieved from: http://www.freelibrary.com [Accessed 2 March, 2014].
[6]	Olawale, A. (2011). “Use of geosynthetics in road construction.” Dissertation, Department of Civil Engineering, Federal University of Technology. Akure, Nigeria, Retrieved from: http://www.google.com/ googlebooks.
[7]	Motanelli, F., Zhao, A., and Rimoldi, P. (1997). “Geosynthetics-reinforced pavement system: Testing and design.” Proceedings of Geosynthetics, 97, pp. 549-604.
[8]	Gosavi, G. and Patil, K. (2009). “Improvement of properties of black cotton soil subgrade through synthetic reinforcement: Effect of plasticity index and reinforcement on CBR value of soft clay”. International Journal of Civil Engineering, 7(2).
[9]	Naeini, S.A., and Moayed, R. (2009). “Effect of plasticity index and reinforcement on CBR value of soft clay”. International Journal of Civil Engineering; 7(2): 124-130.
[10]	ASTM D-1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort.
[11]	ASTM D1883ASTM Standards Tests for CBR of Laboratory Compacted soils.
[12]	Ministry of Roads and Highways, Specifications for Roadworks and Bridges 2006, Government of the Republic of Ghana.
[13]	ASTM. (1994). ASTM Standards and other specifications and test methods on the Quality Assurance of landfill linear systems.
[14]	Giroud, J.P. & Han, J. (2004). Design Method for Geogrid-Reinforced Unpaved Roads. I. Development of Design Method. ASCE Journal of Geotechnical and Geoenvironmental Engineering, 130(8).
[15]	Giroud, J.P. & Han, J. (2006). Closure to “Design Method for Geogrid-Reinforced Unpaved Roads. I: Development of Design Method.” ASCE Journal of Geotechnical and Geoenvironmental Engineering, 132(4).