Geotechnical Behavior of Bar Soil Stabilized with Crushed Granite for Road Foundation Applications in Tropical Conditions

Coovi rocambols Thède AGBELELE^1, , Valéry k. DOKO¹, Edem CHABI², Boris GANMAVO¹ and Mohamed GIBIGAYE¹

¹Civil Engineering Department, University of Abomey-Calavi, Abomey-calavi, Benin

²Civil Engineering Department, National University of Agriculture, Kétou, Benin

Cite this paper:
Coovi rocambols Thède AGBELELE, Valéry k. DOKO, Edem CHABI, Boris GANMAVO and Mohamed GIBIGAYE. Geotechnical Behavior of Bar Soil Stabilized with Crushed Granite for Road Foundation Applications in Tropical Conditions. American Journal of Civil Engineering and Architecture. 2025; 13(4):89-95. doi: 10.12691/ajcea-13-4-1

Abstract

In Benin, the expansion of road infrastructure projects has led to a growing demand for quality construction materials, while conventional resources are becoming increasingly scarce. In this context, the valorization of local materials such as bar soil—which is abundant but mechanically weak—has become essential. This study investigates the geotechnical enhancement of Tori-Dokanmey bar soil through lithostabilization using crushed granite aggregates sourced from Dan. Bar soil and granite aggregate samples were collected and characterized in accordance with applicable geotechnical standards. Five mixtures were formulated with granite contents of 30%, 40%, 50%, 60%, and 70%. The results indicate that the addition of granite aggregates improves particle size distribution, lowers the liquid limit and plasticity index, increases maximum dry density, and reduces optimum moisture content. The California Bearing Ratio (CBR) shows a significant increase with higher granite contents, reaching values that meet the requirements for sub-base layers in all mixtures, and for base layers in mixtures with 60% or more granite. These findings confirm that lithostabilization of bar soil with crushed granite is an effective, economical, and sustainable solution for road construction in Benin.

Keywords:
Bar soil Lithostabilization CBR index Granite aggregate Plasticity

This work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

References:

[1]	Alhassan, M. (2008). Potentials of rice husk ash for soil stabilization. Assumption University Journal of Technology, 11(4), 246–250.
[2]	Ndiaye, M. (2013). Contribution à l’étude de sols latéritiques du Sénégal et du Brésil [Ph.D. Thesis, Université Paris-Est / UCAD, Dakar]. NNT: 2013PEST1133. https://tel.archives-ouvertes.fr/tel-00977354.
[3]	Babaliyè, O., Houanou, A., Vianou, A., Adolphe, T., & Erick, F. (2020). Litho-stabilization of the lateritic gravelly by granite crushed for their use in flexible pavement in Bénin. International Journal of Advanced Research, 8, 1008–1016.
[4]	Houanou, K.A., Dossou, K.S., Prodjinonto, V., Ahouétohou, P., & Olodo, E. (2022). Mechanical characteristics of Avlamè lateritic gravel improved with granite crushed for its use in road construction in Benin. World Journal of Advanced Research and Reviews, 15(2), 279–292.
[5]	CEN (2003) Non-destructive testing – X-ray diffraction from polycrystalline and amorphous materials – Part 1: General principles. EN 13925-1:2003. European Committee for Standardization, Brussels.
[6]	CEBTP (1984) Practical guide for road design in tropical countries. Ministry of External Relations, Paris, p. 160.
[7]	CEBTP (2019) Review of the practical guide for road design in tropical countries. ISBN 978-2-84060-499-0.
[8]	ISO (2021) Geotechnical Investigation and Testing—Sampling Methods and Groundwater Measurements—Part 1: Technical Principles for the Sampling of Soil, Rock and Groundwater. ISO 22475-1:2021. International Organization for Standardization, Geneva.
[9]	AFNOR (2016) NF EN ISO 17892-4:2016. Geotechnical investigation and testing – Laboratory testing of soil – Part 4: Determination of particle size distribution. Association Française de Normalisation (AFNOR), Paris.
[10]	AFNOR (2015) NF EN ISO 17892-1:2015. Geotechnical investigation and testing – Laboratory testing of soil – Part 1: Determination of water content. Association Française de Normalisation (AFNOR), Paris.
[11]	AFNOR (1998) NF P 94-068:1998. Sols: Reconnaissance et essais – Détermination de la valeur de bleu de méthylène d’un sol ou d’un matériau rocheux – Méthode par essai ponctuel. Association Française de Normalisation (AFNOR), Paris.
[12]	AFNOR (2012) NF EN 933-8+A1:2012. Tests for geometrical properties of aggregates – Part 8: Assessment of fines – Sand equivalent test. Association Française de Normalisation (AFNOR), Paris.
[13]	AFNOR (1998) XP P 94-047:1998. Détermination de la teneur pondérale en matière organique d’un matériau – Méthode de calcul. Association Française de Normalisation (AFNOR), Paris.
[14]	AFNOR (2018) NF EN ISO 17892-12:2018. Geotechnical investigation and testing – Laboratory testing of soil – Part 12: Determination of Atterberg limits. Association Française de Normalisation (AFNOR), Paris.
[15]	AFNOR (2010) NF EN 13286-2:2010. Unbound and hydraulically bound mixtures – Part 2: Test methods for laboratory reference density and water content – Proctor compaction. Association Française de Normalisation (AFNOR), Paris.
[16]	AFNOR (2021) NF EN 13286-47:2021. Unbound and hydraulically bound mixtures – Part 47: Test method for the determination of the California bearing ratio, immediate bearing index and linear swelling. Association Française de Normalisation (AFNOR), Paris.
[17]	AFNOR (2020) NF EN 1097-2:2020. Tests for mechanical and physical properties of aggregates – Part 2: Methods for the determination of resistance to fragmentation. Association Française de Normalisation (AFNOR), Paris.
[18]	AFNOR (2011) NF EN 1097-1:2011. Tests for mechanical and physical properties of aggregates – Part 1: Determination of the resistance to wear (Micro-Deval). Association Française de Normalisation (AFNOR), Paris.
[19]	Shah, S.H.A., Khan, S.A., Shah, S.H., Ahmad, F., Khan, M.Z., Khan, I., & Shah, S.F. (2022). Laboratory and in situ stabilization of compacted clay through granite waste powder. Sustainability, 14(21), 14459.
[20]	AGEROUTE-Sénégal (2015) Catalogue de structures de chaussées neuves et guide de dimensionnement des chaussées au Sénégal. AGEROUTE-Sénégal, Sénégal, p. 214.
[21]	Kumar, A., Krishna, M.V., & Sreedeep, S. (2021). A state-of-the-art review on suitability of granite dust as a stabilizer for clayey soils. Crystals, 11(12), 1526.
[22]	Sekloka, H.G.R., Yabi, C.P., Cloots, R., & Gibigaye, M. (2022). Elaboration of a road material based on clayey soil and crushed sand. Fluid Dynamics and Materials Processing, 18(6), 1596–1605.
[23]	Toe, D. (2007). Lithostabilisation d’un graveleux latéritique avec du granite concassé. Laboratoire National du Bâtiment et des Travaux Publics (LNBTP), Burkina Faso.
[24]	Madjadoumbaye, M., Faye, A., & Baudet, B.A. (2012). Lithostabilisation d’une latérite du Cameroun. Revue des Laboratoires des Ponts et Chaussées, 280–281, 123–137.