Article citationsMore >>

J. HAIYANG, Z. PENG, H. YING, Z. JIANWEI, Z. ZHIZENG, Design and Kinematic Analysis of A Pedicle Screws Surgical Robot, Proceedings of the 2010 IEEE International Conference on Robotics and Biomimetics, December 14-18, 2010, Tianjin, China.

has been cited by the following article:

Article

Model of Mobile Robot with Divided Chassis

1Technical University of Košice, Faculty of Mechanical Engineering, Department of Mechatronics, Košice, Slovakia


Journal of Automation and Control. 2015, Vol. 3 No. 3, 110-113
DOI: 10.12691/automation-3-3-14
Copyright © 2015 Science and Education Publishing

Cite this paper:
Ľubica Miková, Michal Kelemen, Alexander Gmiterko. Model of Mobile Robot with Divided Chassis. Journal of Automation and Control. 2015; 3(3):110-113. doi: 10.12691/automation-3-3-14.

Correspondence to: Ľubica  Miková, Technical University of Košice, Faculty of Mechanical Engineering, Department of Mechatronics, Košice, Slovakia. Email: lubica.mikova@tuke.sk

Abstract

This article is about designing and constructing a four-wheel chassis, which will possess better negotiability of diverse terrain. Analyzed is a used concept of chassis motion control of mechatronic systems on the principle of differential wheel control for the task of active tracking of planned chassis path. Created was a simulation model of chassis mobile system in terms of kinematics, which will be usable in concept of chassis locomotion control on diverse terrain. A model is also required for examining behavior of chassis on diverse terrain, for examining the influence of dimensions on chassis behavior during crossing over roughness of terrain.

Keywords