Article citationsMore >>

Cook RD, Malkus DS, Plesha ME. Concepts and Applications of Finite Element Analysis. New York, USA: John Wiley & Sons; 1989.

has been cited by the following article:

Article

Virtual System to Simulate the Performance of Various Categories of Machine Tools during the Design Stage

1Prof. Dr. in Faculty of Engineering, Ain Shams University, Egypt

2Asst. Prof. in Faculty of Engineering, Ain Shams University, Egypt

3PhD. Student in Faculty of Engineering, Ain Shams University, Egypt


American Journal of Mechanical Engineering. 2015, Vol. 3 No. 1, 7-15
DOI: 10.12691/ajme-3-1-2
Copyright © 2015 Science and Education Publishing

Cite this paper:
Mounir Muhammad Koura, Muhammad Lotfy Zamzam, Amr Ahmed Sayed Shaaban. Virtual System to Simulate the Performance of Various Categories of Machine Tools during the Design Stage. American Journal of Mechanical Engineering. 2015; 3(1):7-15. doi: 10.12691/ajme-3-1-2.

Correspondence to: Amr  Ahmed Sayed Shaaban, PhD. Student in Faculty of Engineering, Ain Shams University, Egypt. Email: Amr.Ahmed@eng.asu.edu.eg

Abstract

This paper presents a simulation system designed to evaluate the static and dynamic performance of machine tools. The design considerations of the evaluation system are discussed and the system is then employed in order to compare between various categories of milling machine's structure adapted for end milling operation. The machine performance is identified in terms of static loop stiffness in both x and y directions, mode shapes, and frequency response function (FRF) at tool center point (TCP). The advantage of such a reliable model is that it could replace the many experimental tests that must otherwise be carried out each time the parameters affecting the machine tool performance are changed.

Keywords