1Electrical and Electronics Engineering Department, G.Pulla Reddy Engineering College, Kurnool, India
2Electrical and Electronics Engineering Department, University college of Engineering Kakinada, JNTUK, Kakinada, India
Journal of Automation and Control.
2015,
Vol. 3 No. 1, 18-24
DOI: 10.12691/automation-3-1-3
Copyright © 2015 Science and Education PublishingCite this paper: Satheesh G, T Bramhananda Reddy, CH Sai Babu. Decoupled PWM Based Direct Torque Control of Four Level Inverter Fed Open End Winding Induction Motor Drive.
Journal of Automation and Control. 2015; 3(1):18-24. doi: 10.12691/automation-3-1-3.
Correspondence to: Satheesh G, Electrical and Electronics Engineering Department, G.Pulla Reddy Engineering College, Kurnool, India. Email:
gsatish.eee@gmail.comAbstract
A direct torque control (DTC) of open end winding induction motor (OEWIM) with decoupled PWM is proposed in this present paper. In this approach the four level voltages are generated by two conventional two level inverters which are fed with the unequal dc link voltages. These two inverters are feeding the induction motor from either ends. However, the proposed DTC scheme does not require the sector information of the estimated fundamental stator voltage vector and its relative position with respect to the stator flux vector. Simulation results clearly demonstrate a better dynamic and simplicity in numerical calculations of the proposed method.
Keywords