Article citationsMore >>

Mousavi Abarghouie S.M.R., Seyed Reihani S.M., “Investi-gation of friction and wear behaviors of 2024 Al and 2024 Al/SiCp composite at elevated temperatures’, Journal of Al-loys and Compounds, 501, (2010), pp. 326-332.

has been cited by the following article:

Article

Experimental Investigations towards Optimization of the Parameters for Wear Loss Quantities in A356/Al2O3 Nanocomposites

1Mechanical Engineering Department, Faculty of Engineering, Benha University, Cairo, Egypt


American Journal of Materials Engineering and Technology. 2015, Vol. 3 No. 1, 1-6
DOI: 10.12691/materials-3-1-1
Copyright © 2014 Science and Education Publishing

Cite this paper:
El-Sayed El-Kady, Tamer Khalil, Tarik Tawfeek. Experimental Investigations towards Optimization of the Parameters for Wear Loss Quantities in A356/Al2O3 Nanocomposites. American Journal of Materials Engineering and Technology. 2015; 3(1):1-6. doi: 10.12691/materials-3-1-1.

Correspondence to: Tarik  Tawfeek, Mechanical Engineering Department, Faculty of Engineering, Benha University, Cairo, Egypt. Email: tariktewfic@yahoo.co.uk

Abstract

Metal matrix composites (MMCs) reinforced with nano-particles which called Nanocomposites (MMNCs), are ex-tensively studied in the recent years. Nanocomposites present high strength, wear resistance, hardness and exception- al microstructure stability. The nano-particles can improve the base material in terms of wear resistance, damping properties and mechanical strength. In this paper the tribological behavior of A356/Al2O3 nanocomposites were in- vestigated at room temperatures under dry sliding conditions. The results showed that the wear rate of the A356 alloy was significantly improved by the addition of the Al2O3 nano-particles. The wear rate of the nanocomposites was re- duced to about 25% (for nanocomposites containing 5 vol.-% of nano-particles) of the wear rate of the A356 mono- lithic alloy.

Keywords