Article citationsMore >>

Štamborská M., Losertová M., Mareš V. and Horsák L., “Stress analysis in cylindrical specimens made from 34CrMo4 using DIC”, Acta Metallurgica Slovaca, Vol. 20, Issue 2, 229-235, 2014.

has been cited by the following article:

Article

Numerical Verification of a Full-field Deformation Analysis of a Specimen Loaded by Combined Loading

1Department of Applied Mechanics and Mechanical Engineering, Technical University of Košice, Faculty of Mechanical Engineering, Košice, Slovakia


American Journal of Mechanical Engineering. 2014, Vol. 2 No. 7, 307-311
DOI: 10.12691/ajme-2-7-29
Copyright © 2014 Science and Education Publishing

Cite this paper:
Martin Hagara, Róbert Huňady, Pavol Lengvarský, Jozef Bocko. Numerical Verification of a Full-field Deformation Analysis of a Specimen Loaded by Combined Loading. American Journal of Mechanical Engineering. 2014; 2(7):307-311. doi: 10.12691/ajme-2-7-29.

Correspondence to: Martin  Hagara, Department of Applied Mechanics and Mechanical Engineering, Technical University of Košice, Faculty of Mechanical Engineering, Košice, Slovakia. Email: martin.hagara@tuke.sk

Abstract

The contribution deals with an experimental investigation of deformation fields of a specimen loaded by combined loading. The experiment was done using non-contact optical method of low-speed digital image correlation. This technique allows investigate displacement as well strain fields. The experimentally obtained results depicted in the paper in a form of color maps and graphs were verified by a numerical simulation performed in Ansys, where two types of meshing were used to demonstrate the coherence between experiment and simulation.

Keywords