Article citationsMore >>

Richardson et al., “High power fiber lasers: current status and future perspectives [Invited]”, J. Opt. Soc. Am. B, Vol. 27, No. 11, pp. B63-92

has been cited by the following article:

Article

Optimization of MOPA for YD-DC Fiber Laser

1M.Tech, Amity Institute of Laser Technology & Optoelectronics, Amity University, India


Journal of Optoelectronics Engineering. 2014, Vol. 2 No. 2, 29-32
DOI: 10.12691/joe-2-2-2
Copyright © 2014 Science and Education Publishing

Cite this paper:
Tejaswi Challa. Optimization of MOPA for YD-DC Fiber Laser. Journal of Optoelectronics Engineering. 2014; 2(2):29-32. doi: 10.12691/joe-2-2-2.

Correspondence to: Tejaswi  Challa, M.Tech, Amity Institute of Laser Technology & Optoelectronics, Amity University, India. Email: tejaswi.challa@gmail.com

Abstract

Power scalability of fiber lasers, today, is from few mW to several kW in CW operation and tens of kW in pulsed operation. The wide range of power is possible due to various configurations of the fiber laser system. One such configuration is Master Oscillator Power Amplifier (MOPA), the topic of interest of our paper. We explain the design aspects of MOPA and discuss optimization methodology for MOPA based fiber lasers. We propose optimization, under co-directional pumping, of pump laser, seed laser and the fiber length. We have focused on the state of art technologies considering Ytterbium doped double clad single mode Nufern fiber.

Keywords