Article citationsMore >>

Photoelectric emission (2013). http//www.physics-and-radio-electronic.com/ electronic -devices-and-circuits/electron-emmission/photoelecricemmission.html [accessed 29/06/18].

has been cited by the following article:

Article

Fabrication Procedure of Solar PV Refrigerator Designed for Port Harcourt Environment

1Senior Lecturer, Department of Mechanical Engineering University of Port Harcourt, Port Harcourt, Rivers State, Nigeria

2Department of Mechanical Engineering University of Port Harcourt, Port Harcourt, Rivers State, Nigeria


American Journal of Mechanical Engineering. 2023, Vol. 11 No. 4, 130-140
DOI: 10.12691/ajme-11-4-2
Copyright © 2023 Science and Education Publishing

Cite this paper:
Dr. Mathew Shadrack Uzoma, Dr. M. M. Ojapah, Engr Eseonu Obi. Fabrication Procedure of Solar PV Refrigerator Designed for Port Harcourt Environment. American Journal of Mechanical Engineering. 2023; 11(4):130-140. doi: 10.12691/ajme-11-4-2.

Correspondence to: Dr.  Mathew Shadrack Uzoma, Senior Lecturer, Department of Mechanical Engineering University of Port Harcourt, Port Harcourt, Rivers State, Nigeria. Email: mathshadrack@yahoo.com

Abstract

This research is a follow up of the work titled, “Design Analysis of Solar Powered Photovoltaic Refrigerator”. The solar refrigerator was designed to suite Port Harcourt, Nigeria meteorological data. The geographical position of Port Harcourt being at latitude 4040’N and longitude 7010’E. Average solar irradiation of 4.23kWh/m2/day and sunshine hour of 4.25 were prevalent at the position where the Photovoltaic refrigerator would be mounted. The compressor was rated at 0.07kW. The design drawings for the system, the detailed drawings and the assembly drawings were produced with solid works software.

Keywords