Article citationsMore >>

Yen, Y.T., Fang, T.H., Lin, Y.C., “Optimization of screen-printing parameters of SN9000 ink for pinholes using taguchi method in chip on film packaging,” Robotics and Computer-Integrated Manufacturing. 27. 531-537. 2011.

has been cited by the following article:

Article

Application of Taguchi and FEM to Explore the Surface Properties of Glass Using USM Process

1Mechanical Engineering Department, Thapar University, Patiala, India


American Journal of Mechanical Engineering. 2014, Vol. 2 No. 1, 1-7
DOI: 10.12691/ajme-2-1-1
Copyright © 2013 Science and Education Publishing

Cite this paper:
Vinod Kumar. Application of Taguchi and FEM to Explore the Surface Properties of Glass Using USM Process. American Journal of Mechanical Engineering. 2014; 2(1):1-7. doi: 10.12691/ajme-2-1-1.

Correspondence to: Vinod  Kumar, Mechanical Engineering Department, Thapar University, Patiala, India. Email: vsingla5@yahoo.com

Abstract

The FEM analysis of ultrasonic tool has been done in addition to surface roughness of machined samples using ultrasonic machining process have been presented. The experimental conditions were designed by using DOE approach. The analysis of results has been done using the MINITAB 14.0 software and results obtained are validated by conducting the confirmation experiments. The F-test and P-value has been applied to determine the significant parameters.

Keywords