Article citationsMore >>

Medvecká-Beňová, S, Vojtková, J., Analysis of asymmetric tooth stiffness in eccentric elliptical gearing, Technológ, 4(2013), 247-249.

has been cited by the following article:

Article

Stress Analysis of Eccentric Gear with Asymmetrical Profile of Teeth

1Department of Construction, Automotive and Transport Engineering, Faculty of Mechanical Engineering, Technical University of Košice, Košice, Slovakia

2Department of Applied Mechanics and Mechanical Engineering, Faculty of Mechanical Engineering, Technical University of Košice, Košice, Slovakia

3Department of Mechatronics, Faculty of Mechanical Engineering, Technical University of Košice, Košice, Slovakia


American Journal of Mechanical Engineering. 2016, Vol. 4 No. 7, 390-393
DOI: 10.12691/ajme-4-7-29
Copyright © 2016 Science and Education Publishing

Cite this paper:
Silvia Medvecká-Beňová, František Trebuňa, Peter Frankovský. Stress Analysis of Eccentric Gear with Asymmetrical Profile of Teeth. American Journal of Mechanical Engineering. 2016; 4(7):390-393. doi: 10.12691/ajme-4-7-29.

Correspondence to: Silvia  Medvecká-Beňová, Department of Construction, Automotive and Transport Engineering, Faculty of Mechanical Engineering, Technical University of Košice, Košice, Slovakia. Email: silvia.medvecka@tuke.sk

Abstract

The bending stress of gearing defined by calculation and the actual values of teeth stress may be vary significantly. The stress calculated in a standard way according to available formulas is approximate because some impacts cannot be determined with sufficient accuracy. Recently, at ever faster evolving computer technology, the available literature, we can meet with modern numerical methods, such as finite element method (FEM). The article is devoted to problems determining of the stress in a dangerous section of tooth foot using FEM. The problem is solved for elliptical, eccentric gear with asymmetrical profile of tooth.

Keywords