1Department of Applied Mechanics and Mechanical Engineering, Faculty of Mechanical Engineering, Letná 9, 042 00 Košice, Slovakia
American Journal of Mechanical Engineering.
2016,
Vol. 4 No. 7, 376-379
DOI: 10.12691/ajme-4-7-26
Copyright © 2016 Science and Education PublishingCite this paper: Peter Pavelka, Róbert Huňady, Martin Hagara. Result Correlation of Experimental and Numerical Modal Analysis of a Steel Beam.
American Journal of Mechanical Engineering. 2016; 4(7):376-379. doi: 10.12691/ajme-4-7-26.
Correspondence to: Peter Pavelka, Department of Applied Mechanics and Mechanical Engineering, Faculty of Mechanical Engineering, Letná 9, 042 00 Košice, Slovakia. Email:
peter.pavelka@tuke.skAbstract
The paper deals with an experimental and a numerical investigation of dynamic properties of the structure. Object of interest is a steel rod with circle section. The modal parameters, such as mode shapes and natural frequencies, are obtained by two different ways: experimentally by using experimental modal analysis and numerically by finite element analysis which were computed in NX Nastran solver. The results from both methods are compared in NX through the correlation function. A relation between measured mode shapes and computed mode shapes is expressed by Modal Assurance Criterion. This process of comparing is appropriate for verification of experimental approaches.
Keywords