1Department of Applied Mechanics and Mechanical Engineering, Faculty of Mechanical Engineering Technical University of Košice, Slovakia
2Department of Mechatronics, Faculty of Mechanical Engineering Technical University of Košice, Slovakia
American Journal of Mechanical Engineering.
2016,
Vol. 4 No. 7, 252-257
DOI: 10.12691/ajme-4-7-4
Copyright © 2016 Science and Education PublishingCite this paper: Peter Sivák, Ingrid Delyová, František Trebuňa, Darina Hroncová. Applying of Stress Collectives in the Design of Structural Elements of Heavy Load-Bearing Structures.
American Journal of Mechanical Engineering. 2016; 4(7):252-257. doi: 10.12691/ajme-4-7-4.
Correspondence to: Peter Sivák, Department of Applied Mechanics and Mechanical Engineering, Faculty of Mechanical Engineering Technical University of Košice, Slovakia. Email:
peter.sivak@tuke.skAbstract
The article deals with the analytical-experimental means of determining the rate, respectively, the degree of fatigue damage for the analysis of limit state of main supporting structural element of the main beam on the twin beam of the bridge crane. Taken into account it is the dynamic effect of load hoisting and the application of load collectives and the position of the crane crab obtained experimentally for the development of stress collectives. In this analysis, the expression of the link between random load process and fatigue properties of material the Palmgren-Miner linear theory on fatigue damage accumulation was applied.
Keywords