Article citationsMore >>

Trebuňa, F., Šimčák, F., Odolnosť prvkov mechanických sústav, Emilena, Košice, 2004.

has been cited by the following article:

Article

Use FEM for Identifying Boundary Failure of Sheath Cylindrical Vessel

1Department of Applied Mechanics and Mechanical Engineering, Faculty of Mechanical Engineering, Technical university of Košice, Košice, Slovakia

2Department of Mechatronics, Faculty of Mechanical Engineering, Technical university of Košice, Košice, Slovakia


American Journal of Mechanical Engineering. 2015, Vol. 3 No. 6, 186-189
DOI: 10.12691/ajme-3-6-6
Copyright © 2015 Science and Education Publishing

Cite this paper:
Ingrid Delyová, Peter Sivák, Darina Hroncová. Use FEM for Identifying Boundary Failure of Sheath Cylindrical Vessel. American Journal of Mechanical Engineering. 2015; 3(6):186-189. doi: 10.12691/ajme-3-6-6.

Correspondence to: Ingrid  Delyová, Department of Applied Mechanics and Mechanical Engineering, Faculty of Mechanical Engineering, Technical university of Košice, Košice, Slovakia. Email: ingrid.delyova@tuke.sk

Abstract

This article deals with the shape bottom effect to different types of stress and deformation process at the junction of the cylindrical part of the shell vessel and its bottom. With the FEM using the SolidWorks were different types of stress and deformations of vessel determined. The calculation is designed as a static and during the research it was not taken any technical process into account such as the temperature impact or the materials nonlinearity, the internal stress. There were used a variety of vessel and also the different types of results were compared during the analysis.

Keywords