Article citationsMore >>

Breedveld, P., C. Modeling and Simulation of Dynamic Systems Using Bond Graphs, http://eolss.net.

has been cited by the following article:

Article

The Block Diagram and Equations of State of the Bond Graph Example

1Department of Mechatronics, Faculty of Mechanical Engineering, Technical University of Košice, Letná 9, 042 00 Košice, Slovak republic


Journal of Automation and Control. 2015, Vol. 3 No. 3, 62-66
DOI: 10.12691/automation-3-3-4
Copyright © 2015 Science and Education Publishing

Cite this paper:
Darina Hroncová, Alexander Gmiterko, Tomáš Lipták. The Block Diagram and Equations of State of the Bond Graph Example. Journal of Automation and Control. 2015; 3(3):62-66. doi: 10.12691/automation-3-3-4.

Correspondence to: Darina  Hroncová, Department of Mechatronics, Faculty of Mechanical Engineering, Technical University of Košice, Letná 9, 042 00 Košice, Slovak republic. Email: darina.hroncova@tuke.sk

Abstract

The work shows the use the methodology of Bond Graph for modeling electric system of simple RLC circuit. Electrical model is solved by this approach at the level of its physical behavior. In this paper the method of generation of state equations system is discussed. Model of a simple electrical RLC circuit consisting of a resistor, an inductor, and a capacitor is taken. The differential equations describing the dynamics of the system are obtained in terms of the states of the system.

Keywords