Dear Label_Name,

Greetings! I hope you are well.

I am writing on behalf of an international publishing house, Science and Education Publishing, USA (http://www.sciepub.com).

Science and Education Publishing (SciEP) is a multidisciplinary open access publisher of Journals covering the fields of Science, Technology and Medicine. All SciEP publications are subject to high-quality peer review, editorial and production processes and are freely available online.

Welcome to the April, 2013 edition of SciEP newsletter, providing monthly summaries of articles on science & education related topics of interest to scientist and professionals. The mission of our journals is to provide an open access forum for publishing new findings on issues pertinent to scientific and academic field. We also invite you to submit original research papers, review articles, short reports, or case studies are considered for publication in our Multidisciplinary Journals.

American Journal of Public Health Research
DOI: 10.12691/ajphr-1-1-3

The Implementation of a Tele-Homecare System with Service Oriented Architecture and HL7 Message Transmission Standard
Ching-Sung Wang

American Journal of Medical and Biological Research
DOI: 10.12691/ajmbr-1-1-2

The Influence of Ethanol on Pyruvate Kinases Activity in Vivo, in Vitro, in Silico
Lelevich Sergey Vladimirovich, Khrustalev Vladislav Victorovich, Barkovsky Eugene Victorovich, Shedogubova Tatyana Aleksandrovna

American Journal of Medical Sciences and Medicine
DOI: 10.12691/ajmsm-1-1-1

Clinical and Histological Features in Wegener Granulomatosis
Li Cavoli Gioacchino, Passantino Rita, Bono Luisa, Tortorici Calogera, Ferrantelli Angelo, Giammarresi Carlo, Rotolo Ugo

American Journal of Infectious Diseases and Microbiology
DOI: 10.12691/ajidm-1-1-2

The Curse of Lymphatic Filariasis: Would the Continual Use of Diethylcarbamazine Eliminate this Scourge in Papua New Guinea?
Anne Lanham, Lillian Mwanri

We have released issues of some journals on February 2013.
American Journal of Public Health Research
American Journal of Medical Sciences and Medicine
American Journal of Medical and Biological Research
American Journal of Pharmacological Sciences
American Journal of Clinical Medicine Research
American Journal of Nursing Research
American Journal of Cancer Prevention
American Journal of Medicine Studies
American Journal of Infectious Diseases and Microbiology
American Journal of Cardiovascular Disease Research
American Journal of Biomedical Research
American Journal of Mechanical Engineering
American Journal of Microbiological Research
Journal of Preventive Medicine
American Journal of Food and Nutrition
American Journal of Hypertension Research
American Journal of Sports Science and Medicine
Journal of Cancer Research and Treatment
American Journal of Zoological Research
Journal of Biomedical Engineering and Technology
American Journal of Microbiological Research
Biomedical Science and Engineering

We are pleased to announce that submissions are now being accepted for peer review for all the journals across all our subject areas in SciEP.

Please submit your manuscript via our online submission system:
http://www.sciepub.com/author/signin

To unsubscribe from our mailing list, please click on the following link: unsubscribe

I am looking forward to hearing from you.

Kind regards,

David Rain
Email:join@sciepub.com
Science and Education Publishing (http://www.sciepub.com)

Synthesis of Zinc Oxide Nanoparticles with a Green Method Route

Mahtab Yaghoubi

Islamic Azad University, Tehran, Iran

Abstract: The current study examines the production of Zinc Oxide nanoparticles. Nanoparticles of Zinc oxide were successfully synthesized with a green method route. The nanoparticles of different materials have Many applications in medical sciences, chemicals, construction, health, etc. Zinc oxide is one of the most widely used substances in the health and cosmetics industries due to its antibacterial virtues of this Substance. The synthesis process was accomplished using Stachys lavandulifolia. The production of Zinc Oxide NPS has several methods. Still, the use of plants for the synthesis of this substance (green Synthesis) has superiorities such as diminishing pollution, and output costs, and not genesis harmful chemical side outcomes. The extract of Stachys lavandulifolia was obtained at 100 Celsius and used for. The NPS were characterized by different techniques containing XRD, SEM, and DLS as the results revealed that the Particle size was between 30 and 50 nm and their shape was spherical.

Keywords: zinc oxide nanoparticle, green methode

Received February 20, 2023; Revised March 25, 2023; Accepted April 05, 2023

Citation: Mahtab Yaghoubi, Synthesis of Zinc Oxide Nanoparticles with a Green Method Route. Nanoscience and Nanotechnology Research, 7 (1). 1-5. January 2023. doi:10.12691/nnr-7-1-1

1. Introduction

A nanoparticle or ultrafine particle is generally denoted as a particle of matter that is between 1 and 100 Nm (nanometers) in diameter [1]. The properties of NPS oftentimes differ markedly from those of larger particles of the same substance. Inasmuch as the typical diameter of an atom is between 0.15 and 0.6 nm, a large fraction of the NPS material lies within a few atomic diameters from its surface [2].

Therefore, the Properties of that surface layer may prevail over those of the bulk material. This effect is particularly potent for NPS scatter in a medium of different melanges since the interactions between the two materials at their juncture also become substantial. NPS is required to avoid the efficiency of undesirable or harmful by-products through the build-up of reliable, sustainable, and eco-friendly synthesis modus operandi and green synthesis of materials. [3]

NPS, produced through alignment, control, clean up, and remediation processes will directly help enhance their environmental friendliness. ZnO NPS under 200 nm have high efficiency in scattering light and inducing cosmetically desired whitening to the skin. It has also been used in foot care, ointment, and over-the-counter topical products. [4,5]

There are some studies were examined as follows:

Due to the antimicrobial activity of nanoparticles and the lack of persistence, they can be suitable options to deal with the configuration of bacterial biofilms. The intention of the current study was the biosynthesis of zinc oxide nanoparticles using green tea extract and determining its effect on biofilm formation in Pseudomonas aeruginosa isolated from wound infection. The biosynthesis of nanoparticles was confirmed by analysis. The size of nanoparticles was distinguished in the range of 10 to 90 with an average below 40 nm. Nanoparticles in concentrations of 250, 500, and 1000 μg/ml had antimicrobial activity and the minimum inhibitory concentration was reported as 500 μg/ml. Concentrations of 500 and 1000 µg/ml inhibited biofilm formation by 25-90%. The antimicrobial and anti-biofilm efficacy of nanoparticles increased with the enhancement of their concentration. [6].

In this study, ZnO nanoparticles were agglutinated and identified through the "green" synthesis habitude of zinc sulfate salt 7 water using water extract of rattle plant (Prosopis fractal) to expand green chemistry. These nanoparticles were scavenged with the help of UV-Vis, XRD, and SEM methods. In the resumption of the work, the antimicrobial activity of the synthesized nanoparticles on two Gram-negative bacteria (Escherichia coli, Salmonella enteritidis) and two Gram-positive bacteria (Staphylococcus aureus, Bacillus subtilis) was inquired using disk diffusion tests [7].

Green synthesis has received much attention due to its lower cost and environmental friendliness compared to the chemical and physical synthesis methods used to vintage nanoparticles. Also, the nanostructures produced in this way can emulate well with chemical and physical methods.

Aluminum oxide nanoparticles (alumina), one of the inorganic compounds with the chemical formula Al₂O₃, with unparalleled features in increasing the endurance of thin layers, are used in refractory covering and implants. In this research, using green tea extract and aluminum nitrate salt, the ability to produce alumina nanoparticles has been investigated. The result of the visible-ultraviolet spectroscopic analysis illustrates that the absorption peak of produced nanoparticles is in the range of 390nm and the range of aluminum oxide energy gap, and also from the results of infrared Fourier transform spectroscopic analysis; a substantial absorption range at 1 cm; 1638; 1313 and 3069 also corroborate the production of alumina nanoparticles [8].

The purpose of this study is to appraise the antibacterial activity of ZnO synthesized via the “green method” from the extraction of the hyssop plant versus partly Gram-positive (Staphylococcus aureus, Staphylococcus epidermidis) and negative (Pseudomonas, Escherichia coli) bacteria. Materials and methods: To perform this empirical research, a waterless granule of hyssop plant extract was first accumulated, and zinc acetate was the provenance of zinc. Since green method synthesis correspondent with the formalities, condensation from 2000, 1000, 500, and 250μg/ml has been prepared, and blank disks with the aforesaid concentrations were implanted on the cultured bacteria lamella in Mueller Hinton agar culture medium, also from Gentamicin antibiotic disk (as a control) was used. Findings: The results showed that zinc oxide nanoparticles synthesized by the green method from the extract of the hyssop plant at concentrations of 2000 and 1000μg/ml had good antibacterial activity. that the halo of non-growth was formed in the concentration of 2000 μg/ml in Escherichia coli and Staphylococcus aureus almost equal to the control sample. Discussion and conclusion: The results captured from determining the antibacterial properties of ZnO nanoparticles synthesized from the extract of the hyssop plant demonstrate that there is a straight relationship betwixt nanoparticle doping and bacterial removal [9].

2. Substances and Techniques

2.1. Materials

S. lavandulifolia grows 30 centimeters (1 ft) tall and wide, with a reclining habit and narrow, lanceolate, whitish-gray evergreen leaves that are less than 50 mm (2 in) long. The leaves grow opposite each other on the stem and emerge to grow in bunches. When the leaves are rubbed, oils give off a fragrance similar to rosemary. These oils are used for scenting soaps. The 25 mm (1 in) long, pale lavender flowers grow on short inflorescences, blooming circa one month in late spring and early summer. The flowering stems have very few flowers on widely spaced whorls. Some varieties have a dark calyx. The following shapes are depicted. [10]

Shape 1. S. lavandulifolia

Shape 2. calyx of S. lavandulifolia

Shape 3. The composition of S. lavandulifolia

Figure 1.

S. Lavandulifolia Vahl plant was collected from a herbal area mountains of Iran, and authenticated by the Department of Botany. Zinc nitrate was provided by the Department of Chemistry, Two brands, Sigma (USA) & Merk (Germany), of zinc nitrate were used in this research to examine validation.

This herb got elution 3 times with distilled water to eliminate any impurities. Afterward, 3g of the prim leaves were assembled, desiccate, and ground unto a granule. The powder was dispersed in 100 mL of deionized distilled water and boiled for 20 minutes at 100°C, which was then filtered to yield the extract by a paper filter. Zinc dioxides in deionized water were used in experiments. Different concentrations of zinc nitrate were dissolved in 50 ml deionized water and mixed with S. Lavandulifolia Vahl extraction in two aspects and stirred for 120 minutes at 70°C, as depicted in Figure 1.

2.2. Characterization of Nanoparticles

In this study, to examine the particles obtained from the process, various tests were fulfilled on the particles. SEM analysis was performed by MiRA3tescan to study the shape and morphology as well as particle size and the particle size, DLS test was performed on the acquired particles.

3. Result & Discussion

Zn(NO₃)₂ nanoparticles were synthesized using s. lavandulifolia flower extract without using any additional reagents. To synthesize zinc oxide, this study pursues adding to extract s. lavandulifolia, the reduction of Nitrate ions to ZnO₂ NPS could be seen by the naked eye through the brown color suspension. The resulting solution was centrifuged and the precipitate was dried after two rinsing steps with distilled water and acetone at room temperature and sent for analysis. XRD analysis is shown in the following configuration.

At peaks of 33, 39, 57, 67, 70 degrees of the reference code, 03_065_288 of the zinc oxide indicator appeared.

The results are shown in the table underneath.

Table 1. SEM analysis of nanoparticles

Figure 2. XRD analysis of nanoparticles

Figure 3. SEM test results of nanoparticles

SEM test results for all 4 samples are shown in Figure 3. Particle size in nanometers is distinguished in each shape.

The results of the DLS test are shown as a scatter of particle size of the diagram in the image below (4). The average particle size in the M3 sample was 19 nm, which is largely consistent with the SEM test result.

Figure 4. The results of the DLS test

The results confirmed the formation of the NPS had a uniform structure with a near-spherical Morphology. Also, the results indicated a high potential of s.lavandulifolia for the synthesis of Zn(NO₃)₂ Nanoparticles with a mean size of 19-40 nm. The s.lavandulifolia has to any additional surface tents, polymers, or chemical reagents at room temperature and atmospheric pressure. This is an attempt to further develop the green synthesis approach of nanoparticles.

Table 2 shows the particle size range in all four samples. The results clarify that if the concentration of zinc nitrate increases due to zinc saturation, the crystal grows swiftly and the concentration of the plant extract increases and the particle size becomes slightly larger owing to the lack of sufficient reducers in the system. The type of nitrate Application Company has little effect on the results.

Table 2. The particle size range in all four sample

4. Conclusion

Zinc oxide nanoparticles are produced and synthesized by green synthesis. The forms of nanoparticles are spherical and produced homogeneously. In general, the use of this method is very low cost due to non-toxic substances during the process. This process doesn't need prohibitive equipment, as well as a very fast and commodious process in stable pressure and temperature makes this method proposed for the production of Nanopharmaceuticals and other Nanomaterials. The smaller the particles, the better the absorption, and is very beneficial for medicinal and health purposes. Correspondent to former research, the synthesizing of Zinc oxide nanoparticles with green plants is more effective for medical purposes. Moreover, the green synthesis process was engaged to inbreed ZnO using s.lavandulifolia plant extract as an abiding and capping doer in the medium. The optimized reaction conditions are modest and affordable procedures, and pharmaceutical usage of the green synthesis ZnO-based medicine prehension system is highlighted in our research detects. From a comparative view, in the first step, it is trivial that many new applications of the herb s.lavandulifolia as regard both have similar properties to remedy the brain, stomach, uterus, and internal organs. This quotes the fact that despite unequal facilities and laboratory equipment of the old days’ analogy with the modern technological and scientific equipment, the power of knowledge and accuracy of recognition in old sages was so considerable that can be compared with new scientific findings and it shows how they manufactured their perceptions of herbs properties based on clinical evidence.

References

[1]   | U.S. Environmental protection agency: Characteristic of particle size categories from the EPA website.
[2]   | Doblem. M, Kruthiventi Ak. Green chemistry and engineering. Cambridge: Academic press.2007.
[3]   | Silver Batista, C.A; Larson, R. G; Kotov, N.A. (9 October 2015), Nonadditivity of nanoparticle interactions. Science. 350 (6257): 1242477-1242477.
[4]   | M.J. Osmond. M.J. McCall. Zinc oxide nanoparticles in modern sunscreens: An analysis of potential exposure and hazard, nanotoxicology, Vol. 4, no.1, PP.15-41, 2010.
[5]   | Shabani.M, Rahaiee, S, Zare, M, J, S. (2020). Green synthesis of ZnO nanoparticles using seed extract; Biological functions and photocatalytic, degradation properties. www.Elsevier.com.
[6]   | Sadee Shojai. B & et al. (2019). Biyosenthesize of Zno nanoparticle by using the Green Method. Microbe Press. No.1.
[7]   | Mehdinezhad. N & Etal. (2015). Green Synthesize of ZNO. Agricultural and Natural University.
[8]   | Jabarivand .S & Etal. (2019). Nano Synthesize of ZNO. Nanotechnology of an international conference. No. 923.
[9]   | Rahimi Shah. M.G & Etal. (2019). The antibacterial activity of Zinc Oxide nanoparticles synthesized the green method. URL: http://yafte.Lums.ac.ir.
[10]   | Clebsch, Betsy; Barner, Carol D. (2003). The New Book of Salvias. Timber Press. p. 198. ISBN 978-0-88192-560-9.