Dear Label_Name,

Greetings! I hope you are well.

I am writing on behalf of an international publishing house, Science and Education Publishing, USA (http://www.sciepub.com).

Science and Education Publishing (SciEP) is a multidisciplinary open access publisher of Journals covering the fields of Science, Technology and Medicine. All SciEP publications are subject to high-quality peer review, editorial and production processes and are freely available online.

Welcome to the April, 2013 edition of SciEP newsletter, providing monthly summaries of articles on science & education related topics of interest to scientist and professionals. The mission of our journals is to provide an open access forum for publishing new findings on issues pertinent to scientific and academic field. We also invite you to submit original research papers, review articles, short reports, or case studies are considered for publication in our Multidisciplinary Journals.

American Journal of Public Health Research
DOI: 10.12691/ajphr-1-1-3

The Implementation of a Tele-Homecare System with Service Oriented Architecture and HL7 Message Transmission Standard
Ching-Sung Wang

American Journal of Medical and Biological Research
DOI: 10.12691/ajmbr-1-1-2

The Influence of Ethanol on Pyruvate Kinases Activity in Vivo, in Vitro, in Silico
Lelevich Sergey Vladimirovich, Khrustalev Vladislav Victorovich, Barkovsky Eugene Victorovich, Shedogubova Tatyana Aleksandrovna

American Journal of Medical Sciences and Medicine
DOI: 10.12691/ajmsm-1-1-1

Clinical and Histological Features in Wegener Granulomatosis
Li Cavoli Gioacchino, Passantino Rita, Bono Luisa, Tortorici Calogera, Ferrantelli Angelo, Giammarresi Carlo, Rotolo Ugo

American Journal of Infectious Diseases and Microbiology
DOI: 10.12691/ajidm-1-1-2

The Curse of Lymphatic Filariasis: Would the Continual Use of Diethylcarbamazine Eliminate this Scourge in Papua New Guinea?
Anne Lanham, Lillian Mwanri

We have released issues of some journals on February 2013.
American Journal of Public Health Research
American Journal of Medical Sciences and Medicine
American Journal of Medical and Biological Research
American Journal of Pharmacological Sciences
American Journal of Clinical Medicine Research
American Journal of Nursing Research
American Journal of Cancer Prevention
American Journal of Medicine Studies
American Journal of Infectious Diseases and Microbiology
American Journal of Cardiovascular Disease Research
American Journal of Biomedical Research
American Journal of Mechanical Engineering
American Journal of Microbiological Research
Journal of Preventive Medicine
American Journal of Food and Nutrition
American Journal of Hypertension Research
American Journal of Sports Science and Medicine
Journal of Cancer Research and Treatment
American Journal of Zoological Research
Journal of Biomedical Engineering and Technology
American Journal of Microbiological Research
Biomedical Science and Engineering

We are pleased to announce that submissions are now being accepted for peer review for all the journals across all our subject areas in SciEP.

Please submit your manuscript via our online submission system:
http://www.sciepub.com/author/signin

To unsubscribe from our mailing list, please click on the following link: unsubscribe

I am looking forward to hearing from you.

Kind regards,

David Rain
Email:join@sciepub.com
Science and Education Publishing (http://www.sciepub.com)

Solvent Extraction of Ni and Cu from Synthetic Solution Containing Ni, Cu, Fe and Zn by Using D2EHPA

Amirhossein Soeezi

School of Mining Engineering, College of Engineering, Graduated from University of Tehran, Tehran 1439957131, Iran

Abstract: Solvent extraction is one of the effective methods for extracting copper and nickel from aqueous solution of pregnant liquid solution. This research is mainly based on direct solvent extraction method. The effect of extraction of D2EHPA on extraction of copper and nickel ions in synthetic solution has been investigated. In this study, by changing the levels of parameters such as speed and time of mixing, concentration of extractor, acidity (pH) and temperature were determined to extract copper and nickel from synthetic solution. It should be noted that, in this synthetic solution, the amount of copper was 770 ppm, nickel 3200 ppm, iron 800 ppm, and 200 ppm. The results of the experiments showed that the best and highest extraction of copper and nickel ions at 5 min, speed of 700 rpm, temperature= 45 ° C, extractor concentration= 30% and ratio A / O = 3 at pH = 6.

Keywords: solvent extraction, D2EHPA, pregnant liquid solution, copper and nickel extraction

Received June 26, 2019; Revised August 06, 2019; Accepted August 23, 2019

Citation: Amirhossein Soeezi, Solvent Extraction of Ni and Cu from Synthetic Solution Containing Ni, Cu, Fe and Zn by Using D2EHPA. Materials Science and Metallurgy Engineering, 6 (1). 1-5. January 2019. doi:10.12691/msme-6-1-1

1. Introduction

Hydrometallurgical method is practiced in almost of the mines in which their reservoirs are of oxide ores in order to extract metal from the liquid solution. According to statistics in 2010, approximately 4.5 million tons of copper metal is yearly extracted from its ore by hydrometallurgical methods [1]. Solvent extraction is based on a variety of organic solvents. The extractants with different formula have been produced and utilized in order to extract elements such as copper, nickel, zinc and etc. from aqueous solution [2,3,4,5,6,7]. The purpose of the using solvent extraction method is to enrich the impregnated solution and reduce the impurities associated with valuable elements. According to the studies, extractants like D2EHPA and Cyanex 272 have been used to separate cobalt, manganese and zinc ions from aqueous solution [8,9]. On the other hand, the extractants LIX for extract copper [10] and Cyanex group [11] like Cyanex 301 and 302 and mixing of D2EHPA and TBP have been utilized to extract nickel ions. Nowadays, several studies have been carried out on the extraction of nickel from aqueous solution of pregnant leach solution. According to the studies, Different parameters such as type and concentration of extractor, speed and stirrer time, temperature and the A/O ratio have a important effect on the extraction of nickel from its aqueous solution [12,13,14,15]. So, optimizing the effective parameter shall be affect to the extraction different metals from its liquid solution. To date, several papers have been published the separation of nickel and cobalt, but few of them have considered the extraction of nickel, copper, iron and zinc elements in one complex. Rout and et.al observed that mixing of two extractant such as D2EHPA and Cyanex 272 can increased the extraction of zinc and manganese. Moreover, they investigated that pure D2EHPA can extract Zn from liquid solution containing Zn and Mn selectively [9]. Chu Yong Cheng and et al extracted cobalt and nickel by D2EHPA and mixing of LIX1104 and Versatic 10. They observed that LIX1104 in 0.6 M concentration, pH= 6 and time= About 2.5 min can extract 95% of Ni from its liquid solution.

Time and speed of stirring are another important parameters for extracting the elements from aqueous solution. Increasing the stirring speed, increases the amount of turbidity of the aqueous and organic solution. So, the recovery rate is reduced [8].

The aim of the present study is selective solvent extraction and stripping of Ni from its liquid solution containing Ni-Cu and Ni-Cu-Fe-Zn ions. The variety of solvent extractants. D2EHPA is the important parameters such as concentration extractant, temperature, pH, mixing speed and time were also done. Extraction of Ni from the synthetic aqueous solution containing four Cu, Ni, Fe and Zn ions.

2. Materials and Methodology

2.1. Materials

D2EHPA is known to be an organophosphorus extractor and is known by the chemical formula di-2-ethylhexylphosphoricacid with 97% purity.

The CuSO₄.5H₂O, NiSO₄.6H₂O, FeSO₄.7H₂O and ZnSO₄.7H₂O to prepare the synthetic solutions containing Cu-Ni-Fe-Zn ions. The concentration of elements in the industrial solution is illustrated in Table 2. And it should be noted that, kerosene is used for dilute of organic phase.

2.2. Methodology

Ni and Cu were extracted using the solvent extraction method by different extractants D2EHPA in 5, 10, 15, 20, 25, 30% concentrations. The other parameters such as Speed and time stirrer, pH, TEMP and A/O ration were optimized to high extract of nickel.

Table 1 is indicating of numerical parameters that used for extraction of Ni and Cu from its liquid solution.

Table 1. Numerical parameters

Table 2. Elements concentration

Figure 1. Detail design of mixer

2.3. Design of Tank and Agitator to Mixing

One of the important equipment in solvent extraction method is the agitator and tank of it. So, in this paper, the calculations of tank and agitator are included. It should be noted, all of calculation are follow the Denver sala and Industrial mixing hand books [18,19]. For these tests needed tank with 4-liter capacity. So, for better performance, 6-liter tank was designed. The type of impeller is pitched blade turbine and the material of shaft, impeller and baffles is stainless steel 316. Figure 1 is indicating of the detail design of it.

3. Result and Discussion

This extractant is categorized in the group of cationic organophosphorus extractant. Figure 2 is indicating the effect of organic (D2EHPA) concentration in different pHs for extracting Ni and Cu from its liquid solution.

According to Figure 2, increasing the pH can increase the extraction of nickel and copper in different organic concentrations. On the other hand, increasing pH from 2 to 6, the extraction of nickel and copper can increase till 30% and 20% Respectively. Also, increasing D2EHPA concentrate in pH=6 from 5% to 30% can extract nickel 38% and 52.5%. The extraction of copper and nickel 45% and 52% in pH=5 and 30% organic phase concentration respectively. So, in this level observed that pH=6 can extract copper and nickel better than the other pHs. Therefore, 6 was selected to continue the process and tests.

Figure 2. Extraction of Ni and Cu by different concentrations in pH=2-6 (RPM=500, TEMP= Ambient, Time= 5 min, A:O = 1:1)

Figure 3 is indicating of A:O ratio to extraction of Ni and Cu from its liquid solution.

Figure 3. Extraction Cu and Ni from its liquid solution in pH=6, organic phase= 30%, RPM= 500, TEMP= Ambient and time= 5 min

As a Figure 3, A:O is important parameter that be used for extraction of Ni and Cu because by increasing of A:O the amount of nickel extraction was increase till 20%. According to Figure 3, the extraction of Ni in A:O= 1 and A:O = 4 are 52.5 and 62 respectively. The little difference between the A/O=4 and A/O=3, so it is economic to aspect the A/O=3 for other tests. The other important parameter is temperature of reaction. So, Figure 4 is indicating effect of different temperatures on extraction of Ni and Cu. In this figure showing that the 40°C is best temperature to extraction of Ni and Cu.

Figure 4. Effect of different TEMP on extraction of Ni and Cu (RPM= 500, CONC. :30%, Time:5 min and pH= 6)

Figure 5. Effect of different mixing speed on extraction of Ni and Cu (TEMP= 45°c, CONC. :30%, Time:5 min and pH= 6)

The increment of the temperature has increased the extraction of Cu and Ni ions from solution (Figure 4). The extraction of Ni ions was increased 1.5% through raising the temperature from 25°C to 45°C. However, this increase let to enhances more Cu extraction to 2%. Regarding to Ni extraction, it was specified to set the temperature at 45°C for the extraction of Ni ions from the aqueous solution.

The effect of mixing speed on the extraction of Cu and Ni ions is presented in Figure 5. It postulated that increasing the mixing speed from 500 to 700 rpm has enhanced the extraction of Ni ions. Likewise, the speed increment from 500 to 700 rpm in the extractant concentration of 30% is led to increase Ni extraction from 67 to 70%. The results indicate that the increase of mixing speed at any concentration from the organic solution is directed into enhancing Ni extraction.

Figure 6. Effect of different Times on extraction of Ni and Cu (TEMP= 45°c, CONC. :30%, Speed= 700 RPM and pH= 6)

According to Figure 6, increasing stirring time just effect on copper extraction. On the other hand, Ni extraction Did not increase much (About 0.4 %). So, for less energy, the stirrer time is selected for 5 minutes.

Table 3. Some previous studies related to the present work

4. Conclusion

The main results of this research work are summarized as follows:

In this paper using different parameter such as organic concentration, Speed and stirring time, TEMP, pH, and A/O. Solvent extraction of Cu and Ni from synthetic and industrial solutions containing Ni-Cu ions were comprehensively investigated. The results show that extraction process with D2EHPA in different concentrations and parameters, Cu and Ni can be separated effectively from synthetic solutions containing four main elements of Cu-Ni-Zn-Fe. D2EHPA can be extracted about 72 % Ni and 55% Cu ions in TEMP= 45°C, CONC. :30%, Speed= 700 RPM, time= 7 min, O/A=3 and pH= 6 from synthetic solution.

Acknowledgements

I would like to appreciate all the ones who contributed to prepare this work specifically Mr. Mojtaba Karami and Mr. Hossein Lotfi for preparing the chemicals.

References

[1]   | A, Soeezi.; E, Rahimi.; N, Mohaghegh. Investigating the Effect of Concentration and stirring time on Copper Extraction Process from Pregnant Liquid Solution (PLS), Case study: Sungun Copper Mine, Int'l Journal of Research in Chemical, Metallurgical and Civil Engg. (IJRCMCE) 2015, Vol. 2.

[2]  
Q, Sun.; W, Wang.; L Yang.; S, Huang.; Z, Xu.; Z, Ji.; Y, Li.; Y, Hu. Separation and recovery of heavy metals from concentrated smelting wastewater by synergistic solvent extraction using a mixture of 2-hydroxy-5-nonylacetophenone oxime and bis(2,4,4-trimethylpentyl) -phosphinic acid, Solvent Extraction and Ion Exchange. 2018, 36:2, 175-90.

[3]   | N. Kress.; G. Harel.; G. Schmuckler. EXTRACTION OF COPPER SALTS WITH A MIXED EXTRACTANT, Solvent Extraction and Ion Exchange. 2007, 7:1, 47-56.
[4]   | A. Buch.; D. Pareau.; M. Stambouli.; G. Durand. Solvent extraction of nickel (ii) by 2-ethylhexanal oxime from various aqueous solutions. Solvent Extraction and Ion Exchange. 2001, 19:2, 277-299.
[5]   | J. Y. Lee.; Y. Pranolo.; W. Zhang.; C. Y. Cheng. The Recovery of Zinc and Manganese from Synthetic Spent‐Battery Leach Solutions by Solvent Extraction. Solvent Extraction and Ion Exchange. 2010, 28:1, 73-84.
[6]   | M. Hutton-Ashkenny,.; K. R. Barnard; D. Ibana. Reagent Degradation in the Synergistic Solvent Extraction System LIX®63/Versatic™10/Nonyl-4PC. Solvent Extraction and Ion Exchange. 2016, 34:7, 603-621.

[7]  
Y, Ban.; H, Suzuki.; S, Hotoku.; T, Kawasaki.; H, Sagawa.; Nao Tsutsui & Tatsuro Matsumura. Extraction of Trivalent Rare Earths and Minor Actinides from Nitric Acid with N,N,N’,N’-Tetradodecyldiglycolamide (TDdDGA) by Using Mixer-Settler Extractors in a Hot Cell, Solvent Extraction and Ion Exchange. 2019, 37: 1, 27-37.

[8]   | A. S. Guimarães and M. B. Mansur, Solvent extraction of calcium and magnesium from concentrate nickel sulfate solutions using D2HEPA and Cyanex 272 extractants, Hydrometallurgy, 173 (2017), 91-97.
[9]   | R.K. Mishra, P.C. Rout, K. Sarangi, K.C. Nathsarma, Solvent extraction of zinc, manganese, cobalt and nickel from nickel laterite bacterial leach liquor using sodium salts of TOPS-99 and Cyanex 272, Trans. Nonf. Metal Society. 26 (2016) 301-309.
[10]   | R. El-Naggar, A. El-Sherief, S. Mekhemar, Performance of geopolymers for direct immobilization of solvent extraction liquids: Metakaolin/LIX-84 formulations, Journal of Hazardous Materials 360 (2018) 670-680.
[11]   | L. Yun Wang, M. Seung Lee, Separation of Co (II) and Ni (II) from chloride leach solution of nickel laterite ore by solvent extraction with Cyanex 301, Inter. Mine. Proc. 166 (2017) 45-52.
[12]   | B.R. Reddy, K.H. Park, D. Mohapatra, Process development for the separation and recovery of copper from sulphate leach liquors of synthetic Cu–Ni–Co–Fe matte using LIX 84 and LIX 973N, Hydrometallurgy 87 (2007) 51-57.
[13]   | M.Z. Mubarok, L.I. Hanif, Cobalt and Nickel Separation in Nitric Acid Solution by Solvent Extraction Using Cyanex 272 and Versatic 10, Proce. Chemi. 19 (2016) 743-750.
[14]   | M. Tanaka, Y. Huang, T. Yahagi, M.K. Hossain, Y. Sato, H. Narita, Solvent extraction recovery of nickel from spent electroless nickel plating baths by a mixer-settler extractor, Sepa. Purif. Tech. 62 (2008), 97-102.
[15]   | A. Hachemaoui, K. Belhamel, Simultaneous extraction and separation of cobalt and nickel from chloride solution through emulsion liquid membrane using Cyanex 301 as extractant, Inter. Min. Proce. 161 (2017).
[16]   | C. Cheng, Purification of synthetic laterite leach solution by solvent extraction using D2EHPA, Hydrometallurgy. 56, (2000), 369-386.
[17]   | W. Zhang, Y. Pranolo, M. Urbani, C. Cheng, Extraction and separation of nickel and cobalt with hydroxamic acids LIX1104, LIX1104SM and the mixture of LIX1104 and Versatic 10., Hydrometallurgy. 119-120, (2012), 67-72.
[18]   | Edward L. Paul., handbook of industrial mixing science and practice., a john wiley & sons, inc., publication., 2004.
[19]   | Eugene F. Megyesy., Pressure vessel hand book., PV publishing., INC., 2001., Twelfth Edition.
[20]   | Manish K. Sinha, Sushanta K. Sahu, Pratima Meshram, Banshi D. Pandey. Solvent extraction and separation of zinc and iron from spent pickle liquor ., Hydrometallurgy, 147-148, (2014), 103-111.
[21]   | Ruisi Yang, Shixiong Wang, Hengpan Duan, Xiaohong Yuan, Zhangjie Huang, Hong Guo, Xiangjun Yang. Efficient separation of copper and nickel from ammonium chloride solutions through the antagonistic effect of TRPO on Acorga M5640 [J]. Hydrometallurgy, 163, (2016), 18-23.