eng Science and Education Publishing American Journal of Materials Engineering and Technology 2333-8911 2015-10-11 3 3 51 57 10.12691/materials-3-3-1 MATERIALS2015331 article Muhammad Zubair Khan khan@kier.re.kr 1 2 3 Hassan Saleem 4 Adil Mahi 4 A Aleemullah 4 Fazal Ahmed Khalid 4 Syed Asad Ali Naqvi 4 4 4 Tak-Hyoung Lim 4 4 Rak-Hyun Song 4 4 Ghulam Ishaq Khan Institute of Engineering Sciences and Technology, Topi, Swabi, Khabar Pakhtoon Khwa 23640, Pakistan Department of Mechanical Engineering, Heavy Insdustries Taxila Education City (HITEC) University, Taxila Cantt, Pakistan The study involves the design and fabrication of a machine in order to perform creep test of various materials being used in high temperature applications. Maximum applied load on the specimen can be 10kN and tests could be carried out at maxi-mum temperature of 700°C. Machine uses lever loading mechanism for load application and measures extension up to 55% of gauge length of the specimen. All components were designed and stress analysis was performed. Components were fabricated separately and then assembled. The machine was able to successfully perform tensile creep tests for different materials at various temperatures according to ASTM standard E-139-06. http://pubs.sciepub.com/materials/3/3/1/materials-3-3-1.pdf creep machine design fabrication high temperature