Dear Label_Name,

Greetings! I hope you are well.

I am writing on behalf of an international publishing house, Science and Education Publishing, USA (http://www.sciepub.com).

Science and Education Publishing (SciEP) is a multidisciplinary open access publisher of Journals covering the fields of Science, Technology and Medicine. All SciEP publications are subject to high-quality peer review, editorial and production processes and are freely available online.

Welcome to the April, 2013 edition of SciEP newsletter, providing monthly summaries of articles on science & education related topics of interest to scientist and professionals. The mission of our journals is to provide an open access forum for publishing new findings on issues pertinent to scientific and academic field. We also invite you to submit original research papers, review articles, short reports, or case studies are considered for publication in our Multidisciplinary Journals.

American Journal of Public Health Research
DOI: 10.12691/ajphr-1-1-3

The Implementation of a Tele-Homecare System with Service Oriented Architecture and HL7 Message Transmission Standard
Ching-Sung Wang

American Journal of Medical and Biological Research
DOI: 10.12691/ajmbr-1-1-2

The Influence of Ethanol on Pyruvate Kinases Activity in Vivo, in Vitro, in Silico
Lelevich Sergey Vladimirovich, Khrustalev Vladislav Victorovich, Barkovsky Eugene Victorovich, Shedogubova Tatyana Aleksandrovna

American Journal of Medical Sciences and Medicine
DOI: 10.12691/ajmsm-1-1-1

Clinical and Histological Features in Wegener Granulomatosis
Li Cavoli Gioacchino, Passantino Rita, Bono Luisa, Tortorici Calogera, Ferrantelli Angelo, Giammarresi Carlo, Rotolo Ugo

American Journal of Infectious Diseases and Microbiology
DOI: 10.12691/ajidm-1-1-2

The Curse of Lymphatic Filariasis: Would the Continual Use of Diethylcarbamazine Eliminate this Scourge in Papua New Guinea?
Anne Lanham, Lillian Mwanri

We have released issues of some journals on February 2013.
American Journal of Public Health Research
American Journal of Medical Sciences and Medicine
American Journal of Medical and Biological Research
American Journal of Pharmacological Sciences
American Journal of Clinical Medicine Research
American Journal of Nursing Research
American Journal of Cancer Prevention
American Journal of Medicine Studies
American Journal of Infectious Diseases and Microbiology
American Journal of Cardiovascular Disease Research
American Journal of Biomedical Research
American Journal of Mechanical Engineering
American Journal of Microbiological Research
Journal of Preventive Medicine
American Journal of Food and Nutrition
American Journal of Hypertension Research
American Journal of Sports Science and Medicine
Journal of Cancer Research and Treatment
American Journal of Zoological Research
Journal of Biomedical Engineering and Technology
American Journal of Microbiological Research
Biomedical Science and Engineering

We are pleased to announce that submissions are now being accepted for peer review for all the journals across all our subject areas in SciEP.

Please submit your manuscript via our online submission system:
http://www.sciepub.com/author/signin

To unsubscribe from our mailing list, please click on the following link: unsubscribe

I am looking forward to hearing from you.

Kind regards,

David Rain
Email:join@sciepub.com
Science and Education Publishing (http://www.sciepub.com)

Pretreatment of Angora Rabbit Fibers

M. İbrahim Bahtiyari*, Asım Davulcu, Hüseyin Benli

Erciyes University Textile Engineering Department, Kayseri, Turkey

Abstract: Angora rabbit fibers are very attractive for the consumers because of its physical and chemical properties. It has been used as a textile good for a long time but the production and consumption rates were low. This makes it popular and a sign of the wealthy. On the other hand the processing of Angora rabbit fibers has to be managed cautiously because of its structure. As a result of this, pretreatment of them has great importance in terms of the saving its original properties. These fibers are clean and no heavy pretreatment is needed. Even so in the need of the pretreatment processes, it is recommended to use the pretreatment methods valid for the wool but in mild conditions. In this review article, information on the pretreatment of Angora rabbit fibers were compiled and recent studies on angora fibers in terms of the issue were summarized.

Keywords: Angora, rabbit, fiber, pretreatment

Received May 23, 2014; Revised May 27, 2014; Accepted May 27, 2014

Citation: M. İbrahim Bahtiyari, Asım Davulcu, Hüseyin Benli, Pretreatment of Angora Rabbit Fibers. American Journal of Materials Engineering and Technology, 2 (2). 14-16. January 2014. doi:10.12691/materials-2-2-3

1. Introduction

Angora rabbit fiber is a kind of natural protein fiber and belongs to a subgroup named as animal hair fibers [1]. Angora rabbit is one of the oldest known domesticated breeds of rabbit. They were introduced to Europe from Ankara, the town of Turkey [2]. The consumption of wool as an apparel fiber is limited. It was reported as 3.3 % of overall fiber consumption in developed countries in 2010 was belonged to wool fiber [3] and the consumption of angora fibers can be noticed as much lower than the wool consumption. Besides this, its annual consumption is greatly influenced by the fashion and accordingly changes between 5000 and 6000 tons [4]. Although these fibers represent a very small segment of the textile industry, the value of these fibers is high and their usage can never be disregarded [5].

Rabbit hair is principally used for knitting and usually spun on the woollen system [4]. Rabbit hair and fur are generally used for making felts and for the knitted goods such as cardigans, gloves and berets [6]. Angora fiber is well known for its high thermal insulation and its extreme lightness in weight [7,8]. Angora fiber has widespread use in health products for arthritis patients and in thermal underwear for cold climates too [9].

The hair of Angora rabbit, cultivated in Europe and East Asia, can be counted amongst the finest of the animal hairs. The hair is mostly pure white, lustrous and silk-like [10]. Owing to its fine and smooth structure of the fibers, it is difficult to spin [4]. Therefore, these fibers are frequently spun with wool, a proportion of synthetic fiber or with cotton because of technological reasons [10].

Parameters designated the quality of an Angora rabbit fleece are: fiber length, the proportions of the different types of fibers, mean fiber diameter, the proportion of medullated fibers, crimp and absence of felt [11]. Among these parameters, the fiber and medulla diameter was found related with the environmental temperature [12].

Chemically, angora is a keratin fiber. The polypeptide chains of angora keratin are composed of approximately 20 different amino acids [10]. The chemical behavior of these fibers is generally similar to that of wool and other animal fibers [6]. So it can be advised to get help from the methods valid for the pretreatment of wool fibers during processing of Angora rabbit fibers.

2. Pretreatment of Angora Rabbit Fibers

Chemical structure of angora fibers has some similarities with the other animal fibers [5]. The only significant differences among the amino acid compositions of the fibers are cystine and cysteic acid contents [13]. They have more sensitive structure, so during the processes like washing, bleaching and dyeing, these fibers must be treated cautiously [5]. In wool pretreatment, different conventional processes can be applied depending on the end use of the fiber. In general scouring is managed firstly. It is a strenuous work and it can influence the destiny of the wool for subsequent usages. The aim is to terminate the impurities which can weigh the half or more of the raw wool [14]. However Angora rabbit fibers do not need scouring because the angora fibers are very clean. The rabbits produce only 2% of their fiber weight in skin excretions, and also rabbits clean their own fur too [15]. On the other hand, it is well known that yarns often must undergo additional processing before they are ready for use in forming of a texti1e substrate. The yarns may need to be rewound onto appropriate packages, reinforced by application of size, lubricated by application of spinning oil, and/or drawn-in and tied into the machine used in fabric forming [16]. So the spinning oils used during formation of the textile materials then should be removed by washing. Different from wool, water is absorbed less readily by rabbit fibers and hot water tends to soften or to plasticize the fibers [6]. So washing of the fibers should be managed gently.

Figure 1. The shorn Angora rabbit fleece

Moreover carbonizing which can be done to remove the cellulosic impurities from wool by treatment with acid or acid producing salts [1] is not needed to be applied because of the clean structure of the Angora rabbit fiber.

The other conventional pretreatment process in wool finishing is bleaching. Approximately 10% of the total world production of wool is bleached [17]. The Angora rabbit produces hairs of several colors but strain bred for textile fibers is an albino strain that produces white fibers only [4]. However, in some cases, bleaching processes can be carried out. The main bleaching agents for wool are oxidizing and reducing agents, which can also be an alternative for Angora rabbit fibers too [15].

Figure 2. The white Angora rabbit fur

As seen from the Figure 1 and Figure 2 the fibers are generally clean and white so the pretreatment processes are generally focused on preparation of fibers to dyeing processes and to improve their processability.

Perincek et al. studied on the usability of ozone gas for the pretreatment of the Angora rabbit fibers. They have managed ozonation in different conditions and tested the whiteness changes as well as the dyeability. They reported that by the ozonation process, the whiteness degrees and dyeability of Angora rabbit fibers enhanced. The ozonation time, medium temperature, the pH of the water used for the moisturization of the fiber and the moisture content of the fiber during the ozonation process were tested in the study. They obtained the best whiteness degrees and color yields after ozonation at room temperature of Angora rabbit fiber impregnated with water at pH 7 with water pick up value of 60%. Increase in ozonation time showed increase in whiteness degrees and color efficiencies. The surface modifications of the fibers after ozonation were also tested and it was reported that ozone processes damaged the outer layer of the Angora fiber surface [15].

In another study, Perincek et al. have investigated the fiber moisture adsorption and desorption properties after ozonation and then dyeing. As a result of ozonation, an increase in moisture adsorption-desorption capacities and dyeability were obtained. Meanwhile ultrasound was also tested during dyeing processes too [9].

Danish et al. studied surface modification of angora fibers by dielectric barrier discharge of helium and helium + air. It was reported that macromolecules of angora fiber were oxidized, degraded and roughened by the plasma treatment. It was emphasized that by these changes, shedding of the fibers were reduced and dyeability increased with a decrease in whiteness index [18].

Jingjia et al. treated fabrics produced from Angora rabbit fibers with plasma in different atmosphere conditions and with different monomers. The surface modifications by these different applications of plasma were investigated then the friction coefficients of surfaces were tested [19]. Similarly Jhala et al. also studied the plasma etching to increase the surface friction of Angora rabbit fibers [7].

Like plasma and ozone treatment, enzymatic treatment of angora fibers was also investigated by the researchers too. For example; Akçakoca et al. investigated the effects of proteases before dyeing of protein based textile materials. It was found that the protease treatment had a positive effect on Angora rabbit fibers in terms of color efficiencies [5].

In another study, the effect of protease enzyme treatment on rabbit hair characteristics was investigated. For this aim, the rabbit hair was first treated with hydrogen peroxide solution and subsequently by enzymatic treatment. A suitable process of enzymatic treatment was determined, and finally the fiber surface friction coefficient, inter-fiber cohesion, and spinnability were enhanced [20].

3. Conclusions

Textile materials are one of the goods that the human have great interaction. First aim to use textile garments is of course to protect the body from the environmental effects. But today this perception is in change. Now beyond these demands there are different considerations such as fashion, comfort, multifunctionality and etc. Moreover some people are much more aware to use natural based materials and so natural fibers too. In these respects it is believed that use of Angora rabbit fibers will conserve their use in textile materials like other natural fibers. Beyond this, its original properties will take the attention of the consumer hereafter. The common belief on treatment of angora fibers is to make treatments cautiously in order to save their luster and soft handle. Hence, the finishers should be specialized in the treatment of Angora rabbit fibers.

References

[1]   | Karmakar, S.R., “Chemical Technology in the Pre-treatment Processes of Textiles”, first edition, In Textile Science and Technology Series, Vol. 12. Amsderdam, Netherlands, Elsevier Science B.V., 2, 1999.
[2]   | Eken, E., Besoluk, K., Donmez, H.H., and Boydak, M., "A Morphological Study on the Carotid Body of the Angora Rabbit", International Journal of Clinical and Experimental Anatomy, 2, 49-54, 2008.
[3]   | Food and Agriculture Organization of the United Nations and International Cotton Advisory Committee, World Apparel Fiber Consumption Survey, July 2013; (https://www.icac.org/cotton_info/publications/statistics/world-apparel-survey/FAO-ICAC-Survey-2013-Update-and-2011-Text.pdf).
[4]   | Dalton, J. And Franck, R., “Cashmere, Camelhair and Other Hair Fibres” In Silk, mohair, cashmere and other luxury fibers, ed. R.R. Franck, Boca Raton USA, 2000.
[5]   | Akçakoca Kumbasar, E.P., Atav, R., and Bahtiyari, M.I., “Effects of Alkali Proteases on Dyeing Properties of Various Proteinous Materials with Natural Dyes”, Textile Research Journal, 79(6), 517-525, 2009.
[6]   | Cook, J.G., “Handbook of Textile Fibres: I. Natural Fibres”, 5th Edn, Durham England, Merrow Publishing Co. Ltd., 141-143, 1993.
[7]   | Jhala, P.B., Nema, S.K., and Mukherjee, S., “Innovative Plasma System to Improve Angora Fibre”, Indian Textile Journal, 119 (4), 35-39, 2009.
[8]   | Jhala P.B., Nema S.K., and Mukherjee S., “Innovative Atmospheric Plasma Technology for Improving Angora Cottage Industry’s Competitiveness”, 2009. (http://www.fibre2fashion.com/industry- article/pdffiles/17/1637.pdf).
[9]   | Perincek, S., Bahtiyari, M.İ., Körlü, A.E., and Duran, K., “Effect of Ozone and Ultrasound on the Fiber Properties of Angora Rabbit”, Journal of Applied Polymer Science, 120(6), 3119-3125, 2011.
[10]   | Rouette, H.K., “Encyclopedia of Textile Finishing” (CD), Aachen, Springer, 2000.
[11]   | Hermann, S., Wortmann, G., and Wortmann, F.J., “Characteristics of Angora Rabbit Fibre 1: The Influence of Fibre Origin on Fibre and Medulla Diameter in Angora Wool”, World Rabbit Science, 4(3), 149-153, 1996.
[12]   | Hermann, S., Wortmann, G., and Wortmann, F.J., “Characteristics of Angora Rabbit Fibre 2: The Influence of the Methionine Content in Feed and of the Environmental Temperature on Fibre Medulla Diameter in Angora Wool”, World Rabbit Science, 4(3), 155-158, 1996.
[13]   | Jones L.N., Rivett D.E., and Tucker D.J., “Wool and Related Mammalian Fibers” In Handbook of Fiber Chemistry, (3rd ed.), ed. M. Lewin, Boca Raton USA, CRC Press, Taylor & Francis Group, 370, 2007.
[14]   | Bahtiyari, M.İ., and K. Duran, K., “A Study on the Usability of Ultrasound in Scouring of Raw Wool”, Journal of Cleaner Production, 41, 283-290, 2013.
[15]   | Perincek, S., Bahtiyari, M.İ., Körlü, A.E., and Duran, K., “Ozone Treatment of Angora Rabbit Fiber” Journal of Cleaner Production, 16(17), 1900-1906, 2008.
[16]   | Needles, H.L., Textile Fibers, Dyes, Finishes, and Processes, New Jersey, USA, Noyes Publications, 131, 1986.
[17]   | Lewis, D.M., “Ancillary Processes in Wool Dyeing” In: Wool Dyeing, ed. D.M. Lewis, Bradford, England, Society of Dyers and Colourists, 112, 1992.
[18]   | Danish, N., Garg, M.K., Rane, R.S., Jhala, P.B., and Nema, S.K., “Surface Modification of Angora Rabbit Fibers Using Dielectric Barrier Discharge”, Applied Surface Science, 253, 6915-6921, 2007.
[19]   | Jingjia, W., Xiaoxi, N., Shufu, P., and Tianming, W., “A Study on the Plasma Treated Angora Rabbit Hair in Light of the Scale Field-angle”, International Journal of Adhesion and Adhesives, 19, 381-385, 1999.
[20]   | Xi, B.J., Tang, L.M., and Zhang, C.Q., “Enzymatic Treatment of Rabbit Hair Fiber”, Journal of Textile Research, 27(3), 21-23, 2006.