Dear Label_Name,

Greetings! I hope you are well.

I am writing on behalf of an international publishing house, Science and Education Publishing, USA (http://www.sciepub.com).

Science and Education Publishing (SciEP) is a multidisciplinary open access publisher of Journals covering the fields of Science, Technology and Medicine. All SciEP publications are subject to high-quality peer review, editorial and production processes and are freely available online.

Welcome to the April, 2013 edition of SciEP newsletter, providing monthly summaries of articles on science & education related topics of interest to scientist and professionals. The mission of our journals is to provide an open access forum for publishing new findings on issues pertinent to scientific and academic field. We also invite you to submit original research papers, review articles, short reports, or case studies are considered for publication in our Multidisciplinary Journals.

American Journal of Public Health Research
DOI: 10.12691/ajphr-1-1-3

The Implementation of a Tele-Homecare System with Service Oriented Architecture and HL7 Message Transmission Standard
Ching-Sung Wang

American Journal of Medical and Biological Research
DOI: 10.12691/ajmbr-1-1-2

The Influence of Ethanol on Pyruvate Kinases Activity in Vivo, in Vitro, in Silico
Lelevich Sergey Vladimirovich, Khrustalev Vladislav Victorovich, Barkovsky Eugene Victorovich, Shedogubova Tatyana Aleksandrovna

American Journal of Medical Sciences and Medicine
DOI: 10.12691/ajmsm-1-1-1

Clinical and Histological Features in Wegener Granulomatosis
Li Cavoli Gioacchino, Passantino Rita, Bono Luisa, Tortorici Calogera, Ferrantelli Angelo, Giammarresi Carlo, Rotolo Ugo

American Journal of Infectious Diseases and Microbiology
DOI: 10.12691/ajidm-1-1-2

The Curse of Lymphatic Filariasis: Would the Continual Use of Diethylcarbamazine Eliminate this Scourge in Papua New Guinea?
Anne Lanham, Lillian Mwanri

We have released issues of some journals on February 2013.
American Journal of Public Health Research
American Journal of Medical Sciences and Medicine
American Journal of Medical and Biological Research
American Journal of Pharmacological Sciences
American Journal of Clinical Medicine Research
American Journal of Nursing Research
American Journal of Cancer Prevention
American Journal of Medicine Studies
American Journal of Infectious Diseases and Microbiology
American Journal of Cardiovascular Disease Research
American Journal of Biomedical Research
American Journal of Mechanical Engineering
American Journal of Microbiological Research
Journal of Preventive Medicine
American Journal of Food and Nutrition
American Journal of Hypertension Research
American Journal of Sports Science and Medicine
Journal of Cancer Research and Treatment
American Journal of Zoological Research
Journal of Biomedical Engineering and Technology
American Journal of Microbiological Research
Biomedical Science and Engineering

We are pleased to announce that submissions are now being accepted for peer review for all the journals across all our subject areas in SciEP.

Please submit your manuscript via our online submission system:
http://www.sciepub.com/author/signin

To unsubscribe from our mailing list, please click on the following link: unsubscribe

I am looking forward to hearing from you.

Kind regards,

David Rain
Email:join@sciepub.com
Science and Education Publishing (http://www.sciepub.com)

Compositional, Functional and Pasting Properties of Composite Flour Fortified with Button Mushroom (Agaricus bisporus) Powder and Inulin

Abdellatief A. Sulieman, Ke-Xue Zhu, Wei Peng, Muhammad Shoaib, Hayat A. Hassan, Hui-Ming Zhou*

State Key Laboratory of Food Science and Technology, School of Food Science and Technology, Jiangnan University, Wuxi, Jiangsu, PR China

Abstract: Supplementation of composite gluten-free flour (CGFF) with functional food ingredients can be useful to improve its nutritional and health quality. In the present research, the chemical, functional, pasting, and syneresis characteristics of CGFF were studied. CGFF was prepared with different percentages of sweet potato flour (SPF), glutinous rice flour (GRF), button mushroom powder (BMP) and inulin. The xanthan gum (0.5 %) was added as a constant ingredient for all the blends. Addition of BMP to SPF-GRF increased ash (from 1.23 to 2.34 g/100 g), protein (from 5.24 to 11.74 g/100 g), fat (from 0.15 to 0.93 g/100 g), energy (from 345.71 to 350.77 kcal/100 g), and total dietary fibers (from 3.97 to 8.61 g/100 g) contents, while contents of moisture and carbohydrate decreased (from 12.53 to 11.13 g/100 g and 80.85 to 73.86 g/100 g), respectively. On the other hand, fortification of inulin led to reduces in moisture (from 12.53 to 11.07 g/100 g) and ash (from 1.23 to 0.11 g/100 g) contents, whereas carbohydrate, energy, and soluble dietary fibers increased (from 80.85 to 83.54 g/100 g, 345.71 to 355.93 kcal/100 g and 1.22 to 1.77 g/100 g), respectively. Essential and non-essential amino acids of samples containing BMP were higher than samples containing inulin. Moreover, supplementation of BMP increased macro, and micro-minerals, such as K, Ca, Mg, P, Fe and Cu, respectively. Water and oil absorption indexes, and solubility were improved as a result of BMP inclusion, while swelling power increased, and viscosity and syneresis of CGFF decreased with incorporation of inulin. It can be concluded that the incorporation of BMP and inulin improved the nutritional, functional, and syneresis properties of SPF-GRF, which can be utilized in the functional bakery products.

Keywords: composite gluten-free flour, button mushroom, dietary fiber, amino acids, functional properties, mineral elements, inulin

Citation: Abdellatief A. Sulieman, Ke-Xue Zhu, Wei Peng, Muhammad Shoaib, Hayat A. Hassan, Hui-Ming Zhou, Compositional, Functional and Pasting Properties of Composite Flour Fortified with Button Mushroom (Agaricus bisporus) Powder and Inulin. Journal of Food and Nutrition Research, 5 (8). 614-621. January 2017. doi:10.12691/jfnr-5-8-12

1. Introduction

Quality evaluation of flour and composite flour involves the application of physicochemical and sensorial tests based on the chemical composition, gelatinization temperature, baking quality, and physical properties of baked product. Interpreting the chemical, functional and, pasting characteristics of the flour and the blends would facilitate the understanding of their potential uses and applications.

Many gluten-free flour products have poor nutritional value in terms of proteins, dietary fibers, and minerals because they consisting mainly of carbohydrates [1]. Therefore, supplementation of these flours with functional food ingredients is an increasing trend to improve their nutritional and health quality. Composite flour is defined as a mixture of different flours rich in starch, protein, and other nutrients with or without the addition of wheat flour [2]. Composite flours have been used extensively and successfully in many developing countries in the production of baked foods. In this work, the use of composite flour was to enhance the nutritional and health characteristics of the baked products for celiac disorder patients. Sweet potato flour (SPF), glutinous rice flour (GRF), mushroom powder and inulin can be used to develop composite gluten-free bread to enhance their proteins, dietary fibers, and minerals [3,4,5]. SPF has been applied to improve the flavor and texture of cookies and could significantly enhance the dietary fiber and mineral contents of the product [6]. Mushroom powder is a good supplement for sweet potato-based baked products due to both mushroom powder and SPF are complementary in protein and other nutrients. SPF is a poor in protein, whereas mushroom powder possesses high protein with an important content of essential amino acids. Additionally, mushrooms contain significant amount of minerals such as potassium, phosphorus, calcium, and iron [7], besides have good level of dietary fibers due to the presence of non-starch polysaccharides. Genetic structure and environmental factors are mainly responsible for the variations in the composition of the sweet potato and rice, as well as the substrate compositions are affecting mushroom chemical composition.

Button mushroom (Agaricus bisporus), the most cultivated and consumed mushroom worldwide, with a high nutritional value among different varieties, and it contributes around 40% of the total world mushroom production [4]. Inulin is a mixture of polysaccharides and prebiotic, and it plays important role in the nutritional and technological fields. Furthermore, inulin based functional products have good acceptance in the international markets, these products offer additional benefits in terms of natural prebiotic, dietary fiber, texture modifier, fat or sugar replacer, and stabilizer [8,9]. Functional and pasting properties are necessary to evaluate and possibly assist to predict how new nutrient may behave in specific systems, in addition to demonstrate whether or not such nutrient can be used to stimulate or replace convectional nutrient [10,11]. The aim of this work was to assess the effect of sweet potato flour (SPF), glutinous rice flour (GRF), button mushroom powder (BMP) and inulin on chemical, functional, pasting and syneresis characteristics of enriched composite gluten-free flour, as well as its suitability for baking process.

2. Materials and Methods

2.1. Materials

Sweet potato roots (white variety) and glutinous rice flour were purchased from supermarket in Wuxi, China. Freeze-dried button mushroom powder (from Longhai Union Food Co., Ltd., Zhangzhou, Fujian, China); inulin (average degree of polymerization, DP > 10%) (from Guangzhou Zeyu Biotechnology Co., Ltd., China) and xanthan gum (from Danisco Co.).

2.2. Sweet Potato Flour Production

Sweet potato roots were sorted, peeled, washed and sliced. The slices were blanched at 60°C for 10 min, dried at 60 °C for 10 h in convection oven (Dasol Scientific Co. Ltd., Seoul, Korea), and then milled by using laboratory scale mill (Tianjin, Taisite, Instrument Co., Ltd., Tianjin, China). The flour was sieved through an 80-mesh sieve, packed and finally sealed in bags for further analysis.

2.3. Composite Flour Preparation

Three blends were prepared by mixing sweet potato flour (SPF), glutinous rice flour (GRF), fortified with button mushroom (Agaricus bisporus) powder (BMP) and the same fortified with different percentages of inulin (86.5:10:3, 83.5:10:6, and 80.5:10:9). Which were referred to the treatments (T₁, T₂ and T₃). Sweet potato flour (89.5%) with glutinous rice flour (10%) was used as control. Xanthan gum was added to all flour blends at 0.5% by the total weight. The composite gluten-free flour was stored in air tight polyethylene bags for analysis.

2.4. Chemical Analyzes

2.4.1. Proximate Composition

The moisture, ash, protein and fat contents of the samples were determined according to the method of AOAC [12]. The protein content was measured as total nitrogen content by Kjeldahl procedure using a protein factor of 4.38 for BMP and 6.25 for other samples; crude fat of a known weight of sample was extracted with hexane using a Soxhlet apparatus. Carbohydrate content was obtained by difference from moisture, ash, protein and fat. Energy was calculated according to the equation: Energy (kcal/100g) = 4× (g proteins + g carbohydrates) + 9×(g fat). Dietary fibers were determined using enzymatic-gravimetric methods according to description of Latimer [13]. All experiments were performed in triplicate.

2.4.2. Amino Acids Composition

Amino acids composition of samples was carried out using a high performance liquid chromatography (HPLC) in an Agilent 1100 (Agilent Technologies, Palo Alto, CA, USA) assembly system with UV detector operated at 338 nm. Amino acids were analyzed according to the method described by Huang et al. [14] with some modifications. 1.0 g of sample was dissolved in 20 mL of 6N HCL and poured into a hydrolysis tube with screw cap and then hydrolyzed for 22 h under a nitrogen atmosphere. The extracted sample was dissolved in 4.8 mL 10M NaOH to neutralize for acid hydrolysis. After dilution to a known volume and filtration, the hydrolysate (1.0 µL) was injected into HPLC column.

2.4.3. Mineral Composition

Mineral composition of sample was analyzed using a wet digestion with closed system according to the method of AOAC [15]. Dried sample (1.0 g) was digested with concentrated HNO3 (5 mL) and HCLO₄ (1.0 mL) in an oven at 100 °C for 6 h. The digested samples were transferred to volumetric flask (100 mL), diluted, filtered through Whatman filter paper No. 541 and then transferred to plastic bottles (50 mL) for mineral detection using atomic absorption spectrophotometer.

2.5. Functional Properties

Bulk density was determined according to [16] with slight modifications. Flour sample (10 g) was measured in a graduated cylinder (25 mL) after tapping the cylinder on a laboratory bench several times until no visible decrease in volume was noticed. The bulk density based on the weight (g) and volume (mL) was calculated.

[picture] | (1)

Water absorption index was measured by the method of [17]. 1.0 g of sample was mixed with 15 mL of distilled water in a 25 mL centrifuge tube and agitated on a vortex mixer for 2 min, and then centrifuged at 4000 rpm for 20 minutes. The supernatant was decanted and discarded. The adhering drops of water were removed and the tube reweighed again.

[picture] | (2)

Oil absorption index was determined by the method of [18] with minor modifications, to 1.0 g of flour, 10 mL of sunflower oil was added in a plastic centrifuge tube (25 mL) and allowed to stand at room temperature for 30 min, and then centrifuged for 20 min at 4000 rpm. Oil absorption was examined as gram oil bound per gram flour.

Swelling power and solubility were determined according to the method described by Crosbie [19] with slight modifications. A 15.0 mL of distilled water was added to 0.5 g of flour sample in centrifuge tube, and heated in a water bath at 95 °C for 30 min, with constant stirring. The resulting slurry was cooled to room temperature and centrifuged at 4000 rpm for 15 min. The supernatant was decanted into an evaporating dish, dried in an oven at 105°C for 4 h. The dried supernatant and the sediment were weighed. The percentage of solubility (S%) and swelling power (SP g/g) on dry basis was calculated as follows:

[picture] | (3)

[picture] | (4)

2.6. Pasting Properties

Pasting characteristics of flours and the blends were measured using a Rapid Visco Analyzer (RVA 4500, Pty Ltd., Warriewood, Australia). A 3.0 g of sample (14%, w. b.) were dispersed in 25 mL of distilled water into the RVA canister, stirred manually by rotating the plastic paddle. The suspension was subjected to heating-cooling cycle with a constant shear rate (160 rpm), it was held at 50 °C for 1 min, heated to 95 °C at 6 °C/min, and held at 95 °C for 5 min, and then it was cooled and held to 50 °C. The following parameters were estimated: pasting temperature; peak viscosity (PV); trough viscosity (TV); breakdown (BD) = (PV–TV); final viscosity (FV) and setback viscosity (SB) = (FV–TV).

2.7. Syneresis Property

Retrogradation of flour starch measured by syneresis was carried out according to the method described by Kuar et al. [20] with minor modifications. Flour suspension (6% flour in water, w/w) was heated at 85 °C for 30 min in a temperature controlled water bath, and then cooled to room temperature in an ice water bath for 5 min. The cooled samples were stored for 1, 2, 3 and 6 days at 4°C. The ratio of the weight of liquid separated from the sample to the total weight of the sample before centrifugation (at 4500 rpm for 15 min), and multiplied by 100 was calculated as the percentage of syneresis of stored sample.

2.8. Statistical Analysis

All procedures were done in triplicates and collected data subjected to analysis of variance (ANOVA). The differences among means were separated using Duncan’s multiple range test and significances were accepted at 5% level (p < 0.05). The statistical software used was SPSS version 16.0 for windows (SPSS Inc., Chicago, USA).

3. Results and Discussion

3.1. Chemical Composition

The chemical composition of the sweet potato flour (SPF), glutinous rice flour (GRF), button mushroom (Agaricus bisporus) powder (BMP) and the blends is shown in Table 1. BMP had high protein content (27.91 g/100 g), total dietary fiber (17.44 g/100 g), ash content (7.27 g/100 g), and fat content (2.22 g/100 g), but lower contents of moisture (8.47 g/100 g) and carbohydrate (54.11 g/100 g), while SPF and GRF were observed to have lower contents of protein (3.33 g/100 g and 8.04 g/100 g), ash (0.97 g/100 g and 1.03 g/100 g) and fat (0.33 g/100 g and 1.03 g/100 g); and higher moisture (12.10 g/100 g and 13.37 g/100 g) and carbohydrate (83.47 g/100 g and 76.51 g/100 g), respectively. The high protein, total dietary fibers and ash, and low moisture content in BMP used in the fortification of the SPF-GRF affected in the increase of protein, fiber and ash contents, and the decrease in moisture of the composite gluten-free flour, especially BMP T₃ as compared to inulin treatments and control (Table 1). Uju and Obiakar-Okeke [21] found lower moisture (5.24 g/100 g), ash (3.27 g/100 g), protein (11.91 g/100 g) and higher fat (6.90 g/100 g) contents in BMP from Nigeria, whereas, Ojo et al. [22] also stated slightly lower protein (26.23 g/100 g) for Oyster mushroom (Pleurotus pulmonaris) compared to the present study. High dietary fiber blends are considered efficient protective constituents against several varieties of disorders, such as cardiovascular disease, colon cancer and constipation. The ash content in BMP in the present investigation was in line with ash content (7.48 g/100 g) in oyster mushroom dried in laboratory oven, which reported by Aishah and Wan Rosli [23], and lower than that found by Jeong et al. [24] in BMP (8.70 g/100 g. The low moisture content of the blends lead to long shelf life during storage, while high content of moisture cause a microbial growth, especially higher than 12%. The energy value of inulin T₃ was higher (355.93 kcal/100 g) than BMP T₃ (350.77 kcal/100 g), whereas for control flour was the lowest (346.69 kcal/100 g). It was observed that moisture and carbohydrate contents were decreased with increasing level of BMP in composite gluten-free flour, whereas energy values were increased with increasing both BMP and inulin (Table 1). This is possibly due to increment in total dietary fiber and protein contents, and decrement in starch level.

Table 1. Proximate composition (g/100 g) of flours, button mushroom powder and composite gluten-free flour fortified with button mushroom powder and inulin

3.2. Amino Acid Composition

Amino acids are necessary for the synthesis of most body tissues, enzymes and hormones, in addition to the nutritional quality of protein depends primarily on the composition of amino acids. In food processing, amino acids and protein contribute to the flavor, aroma and texture. The results of amino acids of SPF, GRF, BMP and the blends are listed in Table 2. Total of 9 essential amino acids and 8 non-essential amino acids were detected in all the samples. The total essential amino acids composition of the composite gluten-free flour was increment from 326.42 mg/100 g for control to 2022.89 and 413.00 mg/100 g for BMP T₃ and inulin T₃, respectively. BMP T₃ had the highest total amino acids (5599.26 mg/100 g) among all the samples, due to it contained high protein content in comparison to the other blends, especially inulin treatments. BMP revealed the highest amino acids content followed by GRF and then SPF. Glutamic and aspartic acids were the most abundant non-essential amino acids in all the samples, while cysteine content showed the lowest one. All the samples had the highest essential amino acids of valine, isoleucine, leucine and lysine values, while they had lowest histidine level (Table 2). Ekunseitan et al. [25] reported that aspartic acid, lysine and tryptophan increased with inclusion of mushroom powder in the flour blends. Generally, Agaricus bisporus possesses high content of amino acids according to its protein content among the other edible mushroom varieties.

Table 2. Amino acids composition (mg/100 g) of flours, button mushroom powder and composite gluten-free flour fortified with button mushroom powder and inulin

3.3. Minerals Composition

The major and trace minerals are essential for several physiological functions in the human body. Supplementation of SPF-GRF with BMP resulted in increase of minerals content of calcium (Ca), phosphorus (P), potassium (K), magnesium (Mg), sodium (Na), iron (Fe), zinc (Zn) and copper (Cu), and the values are presented in Table 3. SPF had higher Ca content (88.35 mg/100 g) than GRF (28.79 mg/100 g), while BMP was the highest in all minerals content. BMP T₃ of composite flour showed the highest K (456.61 mg/100 g), Ca (282.81 mg/100 g), P (225.26 mg/100 g), and Fe (6.93 mg/100 g) values, whereas BMP T₁ and control demonstrated the lowest contents of these minerals (Table 3). Higher calcium intake by celiac disease patients is important because of after prolonged ingestion of gluten-free diet, absorption of calcium remain impaired [26]. From this point of view, addition of BMP to SPF, besides skim milk powder in the formulation is interesting for development of gluten-free products, which may contain high calcium content. The presence of calcium in the blend is an essential component for human’s health and is required for formation and strengthens of bones and teeth, in addition to responsible for blood clot. With respect to magnesium (Mg), low intake of Mg in children on gluten-free products was reported by Ohlund et al. [27], therefore enrichment of SPF with BMP would have positive impact on Mg content. Overall, the higher ash content in the blends, the higher minerals content.

Table 3. Minerals composition (mg/100 g) of flours, button mushroom powder and composite gluten-free flour fortified with button mushroom powder

3.4. Functional Properties

Functional characteristics of food materials are important factors to consider in food industry or in the formulation of new food products. The findings of functional properties of SPF, GRF, BMP and the composite gluten-free flour are reported in Figure 1a, b, c and d. The bulk density of present study for SPF was 0.61 g/mL followed by GRF (0.55 g/mL) and then BMP (0.42 g/mL). It was noted that there was no significant difference (p > 0.05) in bulk density values between SPF and GRF (Figure 1a). The water absorption index (WAI) and oil absorption index (OAI) of the BMP were found to be the highest (4.54 g/g and 3.63 g/g) compared to SPF (1.72 g/g and 1.98 g/g) and GRF (2.11 g/g and 2.46 g/g), respectively (Figure 1a). While SPF had the highest swelling power (15.79 g/g) and the lowest solubility (28.34%) and BMP had the lowest swelling power (10.51 g/g) and the highest solubility (35.13%) (Figure 1b). The higher WAI, OAI and solubility of BMP might be due to high in its protein, total dietary fiber and pigments levels as compared to SPF and GRF. According to [28], high availability of polar amino acids in sample protein possessed strong affinity for water molecules. Similar swelling power (15.80 g/g) and different solubility (27.00%) values in SPF has been reported by Yadav et al. [29]. Swelling power and solubility are influenced by amylose and amylopectin characteristics, interaction between the water molecules and the flour starch chains in the amorphous and crystalline areas, and the present of phosphorus and starch granules [30,31]. There were no significant differences (p > 0.05) in bulk density among control, BMP T₁, T₂ and inulin T₂. In addition, water and oil absorption indexes of composite gluten-free flour significantly increased with increasing level of mushroom powder and slight decreased with increasing inulin content (Figure 1c), as well as BMP T₁ exhibited the highest solubility (24.1%), while inulin T₁ revealed the highest swelling power (31.73 g/g) and lowest solubility (2.6 %) among all the samples (Figure 1d). Moreover, swelling power decreased and solubility increased with increasing BMP and inulin in the blends, it would be explained by the fact that incorporation of mushroom powder and inulin mainly consisted of water insoluble dietary fiber and water soluble dietary fiber, respectively. Additionally, this is related to increased levels of protein and minerals from BMP fortification and decreased content of starch in composite flour. Addition of mushroom flour to the cassava starch with different levels led to decrement in solubility, which could be as a result of increment in non-starch polysaccharides, namely insoluble dietary fibers (chitin and β-glucan), in addition to less increase in soluble dietary fibers [22]. Kim et al. [32] interpreted that the swelling and breakdown of starch granules by gelatinization allow them easily join with water molecular. Moreover, amylopectin content contributes to swelling of starch granules and improves pasting characteristics, whereas amylose and lipids contents inhibit swelling [33]. In general, higher increase in nutrients such as protein, lipids, fibers and minerals for composite gluten-free flour led to decrement in swelling power and increment in solubility, water and oil absorption properties.

Figure 1. Functional properties of sweet potato flour (SPF), glutinous rice flour (GRF) button mushroom powder (BMP) and composite gluten-free flour fortified with BMP and inulin (A and B = flours; C and D = composite gluten-free flours). Error bars indicate standard deviations. Mean values, marked with different letters are significantly different

3.5. Pasting Properties

Viscosity properties of flours and composite gluten-free flour are displayed in Table 4. There were significant differences (p < 0.05) in viscosity parameters (peak viscosity, breakdown viscosity…) among all the samples. The PV of SPF and GRF were 4270.50 and 2263.10 cP, respectively while the PV of composite flour in the range of 3428.04 cP for BMP T₁ to 2568.08 cP for BMP T₃, and 2730.13 cP for inulin T₃, which were lower than control (3629.21cP). In this present study, SPF had higher viscosity compared to GRF. GRF and T₃ of BMP had the lowest trough viscosity (TV), breakdown viscosity (BD), setback viscosity (SB) and final viscosity (FV), and the values obtained were 1101.40, 1163.65, 1645.29 and 546.13 cp for GRF and 1108.59, 1460.75, 1649.81 and 541.73 cP for BMP T₃, respectively. These results revealed that addition of high levels of BMP and inulin reduced all the viscosity parameters of composite gluten-free flour, while pasting temperature (PT) of composite gluten-free flour slightly increased with increasing level of BMP and inulin in the blends as compared to control sample. This is due to decreased in starch content and increased in dietary fibres, protein and fat contents in composite gluten-free flour. However, no significant differences were observed among the control, T₁ and T₂ of BMP and inulin treatments in TV (Table 4). Batey and Curtin [34] reported that the starch and protein contents in the flours and the blends could affect viscosity properties. The decreased in BD and FV with increasing BMP and inulin in the blends may be result from swelling of flour starch granules, which increased the tendency of soluble and insoluble dietary fibers in composite flour to bind with hydrogen bonds of the water, causing shortage in available water for flour starch granules. The lower the BD, the higher the ability of the blends to form viscous paste or gel after cooking and cooling, as well as low value of BD resulted in high stability of paste to shear stress during stirring [35]. BMP T₃ had the lowest SB viscosity value, indicating the more retrogradation during cooling and high staling rate for its baked product.

Table 4. Pasting properties (viscosity, cP) of flours and composite gluten-free flour fortified with button mushroom powder and inulin

3.6. Syneresis%

The degree of flour starch retrogradation at low temperature during storage period is measured using syneresis property. The syneresis of flours and composite gluten-free flour stored for 6 days at 4 °C is shown in Figure 2a and Figure 2b. SPF exhibited higher retrogradation tendency due to the large amount of water separated during retrograding process compared to GRF. Moreover, SPF had the highest syneresis in the 2nd and 3rd day of storage, whereas GRF revealed the highest syneresis in the 3rd and 4th day of storage (Figure 2a). Percentage syneresis of composite gluten-free flour increased with increasing level of BMP and decrement with increment inulin content, and increased with increase in the first 3 storage days, and then decreased in the last 3 days of storage (Figure 2b). In addition, control sample revealed the lowest syneresis (p < 0.05) compared to BMP and inulin treatments. The higher tendency of retrogradation observed in SPF starch might be result of its higher amylose content, while lowest syneresis in GRF starch due to its lower amylose content (0-2%). Charoenrein and Preechathammawong [36] mentioned that starch gel containing GRF had lower syneresis through freeze-thaw cycles, as well as amylose content played a significant role in the retrogradation associated with freezing and thawing. GRF paste had higher viscosity, lower retrogradation rate and softer gel than that of non-glutinous rice [37]. Among the composite gluten-free flour treatments, T₁ and T₂ of BMP and inulin T₃ had significantly (p < 0.05) lower syneresis as compared to the other treatments. This could be explained by mean that decrement in starch content and increment in protein and total dietary fibers levels in the composite gluten-free flour. There is a significant positive correlation between syneresis property and amylose content. Ribotta et al. [38] pointed out that the protein-retained water could be easily separated compared to the starch-retained water during cold storage period. The presence of hydrocolloids or sugars in starch gel could bind with water molecules and reduced the syneresis [39]. Addition of gums, such as xanthan gum and guar gum to the blends or formulation was minimized retrogradation of amylose and syneresis after freezing due to an interaction between the starch molecules and the hydrocolloids [36].

Figure 2. Syneresis percentage of sweet potato flour (SPF), glutinous rice flour (GRF) and composite gluten-free flour fortified with BMP and inulin, stored at 4 °C for 6 days (A = SPF and GRF; B = control and T₁, T₂, T₃ of both BMP and inulin). Error bars indicate standard deviations. Mean values, marked with different letters are significantly different

4. Conclusions

Fortification of SPF-GRF with BMP and inulin improved its chemical composition in terms of protein, amino acids, minerals, and dietary fibers with reduced carbohydrate in case of BMP addition, and subsequently they appropriate for nutritional supplements. Furthermore, BMP enhanced functional properties such as water and oil absorption indexes and solubility, whereas inulin increased swelling power and both ingredients decreased viscosity and syneresis. Overall, the results indicated that such blends may be useful in functional gluten-free bakery products (such as bread, cookies, and cakes) for the benefit of celiac patients according to their functional and syneresis characteristics.

Acknowledgements

We would like to thank the Priority Academic Program Development of Jiangsu Province, Higher Education Institutes, Wuxi city, Jiangsu Province, China. We also extend our sincere gratitude to all the staff and students of the Research Center of Convenient Food and Quality Control.

Conflict of Interest

We do not have any conflict of interest.

References

[1]   | Matos, M. E., and Rosell, C. M.. Understanding gluten-free dough for reaching breads with physical quality and nutritional balance. J. Sci. Food Agric. 95: 653-661. 2015.
[2]   | Shittu, T.A., Raji, A.O. and Sanni, A.O. Effect of baking time on some physical properties of bread loaf. Food Res Int. 40 (2): 280-290. 2007.
[3]   | Ramesh, Y. A.. Rheological and functional properties of potato and sweet potato flour and evaluation of its application in some selected food products. Food Technological Research Institude, Mysore – 570020, India. 2005.
[4]   | Ghahremani-Majd, H. and Dashti, F. Chemical composition and antioxidant properties of cultivated button mushrooms (Agaricus bisporus). Horticulture, Environment, and Biotechnology, 56: 376-382. 2015.
[5]   | Shoaib, M., Shehzad, A., Omer, M., Rakha, A., Raza, H., Sharif, H. R., Shakeel, A. and et al. Review on inulin properties, health benefits and food applications. Carbohydrate Polymers, 147: 444-454. 2016.
[6]   | Saeed, S., Muhammad, M. A., Humaira, K., Saima, P., Sharoon, M. and Abdus, S. Effect of sweet potato flour on quality of cookies. Journal Agriculture Resources, 50 (4). 2012.
[7]   | Okafor, J. N. C., Okafor, G. I., Ozumba, A. U. & Elemo, G. N. Quality characteristics of bread made from wheat and Nigerian oyster mushroom (Pleurotus plumonarius) powder. . Pakistan Journal of Nutrition, 11(1): 5-10. 2012.
[8]   | Franco, T.S., Perussello, C.A., Elledersen, L.D.S.N. and Masson, M.L. Effect of process parameters on foam mat drying kinetics of yacon (Smallanthus sonchifolius) and thin-layer drying modeling of experimental data. J. Food Process Eng. 2015.
[9]   | Pop, O.L., Vodnar, D.C., Suharoschi, R., Mudura, E. & Socaciu, C. L. plantarum ATCC 8014 entrapment with prebiotics and lucerne green juice and their behavior in simulated gastrointestinal conditions. J. Food Process Eng. 2015.
[10]   | Kaur, M. and Singh, N. Relationships between selected properties of seeds, flours, and starches from different chickpea cultivars. Int. J. Food Prop. 9:597- 608. 2006.
[11]   | Siddiq, M., Nasir, M., Ravi, R., Dolan, K. D. and Butt, M. S. Effect of defatted maize germ addition on the functional and textural properties of wheat flour. Int. J. Food Prop. 12: 860-870. 2009.
[12]   | AOAC. Official methods of analysis of AOAC International (19th ed.). Gaithersburg, MD, USA: AOAC International. 2012.
[13]   | Latimer, G. W. Official methods of analysis of AOAC International (18 ed.). Gaithersburg: EEUU. 2012.
[14]   | Huang, M., Liu, P., Song, S., Zhang, X., Hayat, K., Xia, S. and Gu, F. Contribution of sulfur-containing compounds to the colour inhibiting effect and improved antioxidant activity of Maillard reaction products of soybean protein hydrolysates. J.Sci Food Agric. 91: 710-720. 2011.
[15]   | AOAC. Official Methods of Analysis, (18th ed.). Association of Official Analytical Chemists, Washington, DC. 2006.
[16]   | Maninder, K., Kawaljit, S. S. and Narpinder, S. Comparative study of functional, thermal and pasting properties of flours from different field pea and pigeon pea cultivars. Food Chemistry, 104: 259-267. 2007.
[17]   | Mebpa, H. D., Eboh, L. and Nwaojigwa, S. U. Chemical composition, functional and baking properties of wheat-plantain composite flour. Afric. J. Food Agric. Develop. 7(1):1-22. 2007.
[18]   | Beuchat, L. R. Functional and electrophoretic characteristic of succinylated peanut flour. J. Agricult. Food Chem. 25: 258-261. 1977.
[19]   | Crosbie, G. B. The relationship between starch swelling properties, paste viscosity, and boiled noodle quality in wheat flours. J. Cereal Sci. 13:145-150. 1991.
[20]   | Kuar, L., Singh, N. and Sodhi, S. N. Some properties of potatoes and their starches II. Morphological, thermal and rheological properties of starches. Food Chemistry, 79:183-192. 2002.
[21]   | Uju, N. L. and Obiakor-Okeke, P.N. Nutritional Profile of Three Different Mushroom Varieties Consumed in Amaifeke, Orlu Local Government Area, Imo State, Nigeria. Food Science and Quality Management, 31: 70-77. 2014.
[22]   | Ojo, M. O., Ariahu, C. C. and Chinma, E. C. Proximate, Functional and Pasting Properties of Cassava Starch and Mushroom (Pleurotus Pulmonarius) Flour Blends. American Journal of Food Science and Technology, 5(1): 11-18. 2017.
[23]   | Aishah, M. S. and Wan Rosli, W. I. Effect of Different Drying Techniques on the Nutritional Values of Oyster Mushroom (Pleurotus sajor-caju). Sains Malaysiana, 42(7): 937-941. 2013.
[24]   | Jeong, S.C., Jeong, Y.T., Yang, B.K., Islam, R., Koyyalamudi, S.R., Pang, G., Cho, K.Y. and Song, C.H. White button mushroom (Agaricus bisporus) lowers blood glucose and cholesterol levels in diabetic and hyper cholesterolemic rats. Nutrition Research, 30: 49-56. 2010.
[25]   | Ekunseitan, O; Obadina, A. O; Sobukola, O. P; Omemu, A. M; Adegunwa, M. O. and et al. Nutritional composition, functional and pasting properties of wheat, mushroom, and high quality cassava composite flour. J Food Process Preserv. 1-8. 2016.

[26]  
Pazianas, M., Pazianas, M., Butcher, G.P., Subhani, J.M., Finch, P.J., Ang, L., Collins, C., Heaney, R.P., Zaidi, M. and Maxwell, J. D. Calcium absorption and bone mineral density in celiac after long term treatment with gluten-free diet and adequate calcium intake. Osteoporosis International, 16 (1): 56-63. 2005.

[27]   | Ohlund, K., Olsson, C., Hernell, O. and Ohlund, I. Dietary shortcomings in children on a gluten-free diet. Journal of Human Nutrition and Dietetics, 23 (3): 294 - 300. 2010.
[28]   | Mustapha, S., Mohammed, U. M., Adeosun, N. O., Mathew, T. J., Muhammed, S. S.and Ibn-Aliyu, A. Nutritional and Functional Characterization of Undecorticated Groundnut (Arachis hypogaea L.) Seeds from Bosso Market, Minna, Nigeria. American Journal of Food Science and Technology, 3(5): 126-131. 2015.
[29]   | Yadav, B. S., Yadav, R. B., Kumari, M. and Khatkar, B. S. Studies on suitability of wheat flour blends with sweet potato, colocasia and water chestnut flours for noodle making. LWT - Food Science and Technology, 57: 352-358. 2014.
[30]   | Chan, H.T., Bhat, R. and Karim, A.A. Physicochemical and Functional Properties of Ozone-Oxidized Starch. J. Agric. Food Chem. 57: 5965-5970. 2009.
[31]   | Kaur, A., Singh, N., Ezekiel, R. and Guraya, S. H. Physicochemical, thermal and pasting properties of starches separated from potato cultivars grown at different locations. Food Chemistry, 101: 643-651. 2007.
[32]   | Kim, D. N., Bae, I. Y., Inglett, G. E. and Lee, S. Effect of hydrothermal treatment on the physicochemical, rheological and oil-resistant properties of rice flour. Journal of Texture Studies, 40: 192-207. 2009.
[33]   | Tester, R.F. and Morrison, W.R. Swelling and gelatinization of cereal starches. 1. Effects of amylopectin, amylose, and lipids. Cereal Chemistry, 67:551-557. 1990.
[34]   | Batey, I. L. and Curtin, B. M. The effects on the pasting viscosity of starch and flour of different operating conditions for the Rapid Visco Analyzer. Cereal Chem. 77: 754-760. 2000.
[35]   | Lee, J.H., Cho, A.R., Hong, J.Y., Park, D.-J. and Lim, S.-T. Physical properties of wheat flour composites dry-coated with micro articulated soybean hulls and rice flour and their use for low-fat preparation. J. Cereal Sci. 63: 636 - 643. 2012.
[36]   | Charoenrein, S. and Preechathammawong, N. Effect of waxy rice flour and cassava starch on freeze–thaw stability of rice starch gels. Carbohydrate Polymers, 90: 1032-1037. 2012.
[37]   | Luh, B. S. Rice products. In C. Y. W. Ang, K. Liu, and Y. W. Huang (Eds.), Asian foods: science and technology (pp. 5-42). 1999. Lancaster, PA: Technomic Publishing.
[38]   | Ribotta, P. D., Colombo, A., León, A. E. and Añón, M. C. Effects of soy protein on physical and rheological properties of wheat starch. Starch, 59:614 - 623. 2007.
[39]   | Arunyanart, T. and Charoenrein, S. Effect of sucrose on the freeze–thaw stability of rice starch gels: Correlation with microstructure and freezable water. Carbohydrate Polymers, 74: 514-518. 2008.