Dear Label_Name,

Greetings! I hope you are well.

I am writing on behalf of an international publishing house, Science and Education Publishing, USA (http://www.sciepub.com).

Science and Education Publishing (SciEP) is a multidisciplinary open access publisher of Journals covering the fields of Science, Technology and Medicine. All SciEP publications are subject to high-quality peer review, editorial and production processes and are freely available online.

Welcome to the April, 2013 edition of SciEP newsletter, providing monthly summaries of articles on science & education related topics of interest to scientist and professionals. The mission of our journals is to provide an open access forum for publishing new findings on issues pertinent to scientific and academic field. We also invite you to submit original research papers, review articles, short reports, or case studies are considered for publication in our Multidisciplinary Journals.

American Journal of Public Health Research
DOI: 10.12691/ajphr-1-1-3

The Implementation of a Tele-Homecare System with Service Oriented Architecture and HL7 Message Transmission Standard
Ching-Sung Wang

American Journal of Medical and Biological Research
DOI: 10.12691/ajmbr-1-1-2

The Influence of Ethanol on Pyruvate Kinases Activity in Vivo, in Vitro, in Silico
Lelevich Sergey Vladimirovich, Khrustalev Vladislav Victorovich, Barkovsky Eugene Victorovich, Shedogubova Tatyana Aleksandrovna

American Journal of Medical Sciences and Medicine
DOI: 10.12691/ajmsm-1-1-1

Clinical and Histological Features in Wegener Granulomatosis
Li Cavoli Gioacchino, Passantino Rita, Bono Luisa, Tortorici Calogera, Ferrantelli Angelo, Giammarresi Carlo, Rotolo Ugo

American Journal of Infectious Diseases and Microbiology
DOI: 10.12691/ajidm-1-1-2

The Curse of Lymphatic Filariasis: Would the Continual Use of Diethylcarbamazine Eliminate this Scourge in Papua New Guinea?
Anne Lanham, Lillian Mwanri

We have released issues of some journals on February 2013.
American Journal of Public Health Research
American Journal of Medical Sciences and Medicine
American Journal of Medical and Biological Research
American Journal of Pharmacological Sciences
American Journal of Clinical Medicine Research
American Journal of Nursing Research
American Journal of Cancer Prevention
American Journal of Medicine Studies
American Journal of Infectious Diseases and Microbiology
American Journal of Cardiovascular Disease Research
American Journal of Biomedical Research
American Journal of Mechanical Engineering
American Journal of Microbiological Research
Journal of Preventive Medicine
American Journal of Food and Nutrition
American Journal of Hypertension Research
American Journal of Sports Science and Medicine
Journal of Cancer Research and Treatment
American Journal of Zoological Research
Journal of Biomedical Engineering and Technology
American Journal of Microbiological Research
Biomedical Science and Engineering

We are pleased to announce that submissions are now being accepted for peer review for all the journals across all our subject areas in SciEP.

Please submit your manuscript via our online submission system:
http://www.sciepub.com/author/signin

To unsubscribe from our mailing list, please click on the following link: unsubscribe

I am looking forward to hearing from you.

Kind regards,

David Rain
Email:join@sciepub.com
Science and Education Publishing (http://www.sciepub.com)

Time Dependence of the Resistivity of the Fe-Sb System at Room Temperature

T. M. Fayez*, W. A. M. Zeyara, F. M. A. Salem, H. M. A. Malek, M. M. A. Ahmed

School of physics, Sebha University, Libya

Abstract: In this paper, the synthesis, resistivity measurement, and X-ray diffraction of the Fe-Sb system are reported. The method of synthesis of the Fe-Sb system, which instigates the formation of the FeSb2 and FeSb phases between Fe grains at the interface, was found to cause a decrease in resistivity. The sample produced an anomalous result for resistivity behavior at room temperature, where a time-dependent change in the electrical resistivity was observed. This change can be expressed by the exponential function of time.

Keywords: four-point probe, resistivity, binary compounds

Citation: T. M. Fayez, W. A. M. Zeyara, F. M. A. Salem, H. M. A. Malek, M. M. A. Ahmed, Time Dependence of the Resistivity of the Fe-Sb System at Room Temperature. International Journal of Physics, 6 (2). 30-32. January 2018. doi:10.12691/ijp-6-2-1

1. Introduction

It has been shown that when the electrical resistivity of a material abruptly drops and gradually decreases to zero, these behaviors are temperature dependent [1,2] and time dependent [3,4], respectively. These resistivity behaviors, which occur in certain conditions for physical states, reveal important information about the scattering mechanisms of electrons. The temperature dependence of lattice resistivity has been shown to be dominated by electron-phonon scattering [5], whereas the time dependence of residual resistivity has been observed in structural scatterings [5] at room temperature [3].

Antimony (Sb) with iron (Fe) plays an important role in material science. For instance, in quaternary oxypnictide compounds with Sb in the conduction layer FePn (Pn=pnictogen), a semiconductor-superconductor phase transition has been observed only with an element Sb in the LaO0.89F0.11FeSb compound [6], where this compound showed an anomalous change in the resistivity curve. Also, the partial replacement of As with Sb causes enhancement of the superconducting transition temperature in the LaO0.8F0.2FeAs1-xSbx compound [1]. On the other hand, in binary compound FeSe1-xSbx [7], the partial substitution of Se with Sb causes an anomalous change in the resistivity curve which has been ascribed to a structural transition. However, many researches have focused on investigating the electronic and magnetic properties of iron with non-transition elements with fully occupied d-levels such as Sb, Ge. As regards the temperature dependence of the resistivity measurement, the presence of Ge in the conduction layer in the LaO1-xFxFeGe compound has been found to result in a large decrease in Tanom from 150 K for LnOFeAs (Ln= La, Sm, Ce, Gd) to 90 K for LaOFeGe [2]. In the present paper, the synthesis, resistivity measurement, and X-ray diffraction of the Fe-Sb system are reported. The results reveal a time-dependent change in electrical resistivity with the exponential functions of time. This finding provides a new starting point for research on reducing the resistance of conduction electrons in an impure metal through the utilization of specific phases.

2. Experiment

The Fe-Sb sample was synthesized using a conventional solid state reaction technique by heating high-purity starting materials (Fe and Sb powders). The Sb powder was placed in a pressing boat and then the Fe powder was placed on top of the Sb powder without mixing (i.e. layer upon layer) and then pressed into a pellet. The pellet was placed between two boats of tungsten inside a chamber evacuated at 10⁻⁵ Torr. The pellet was heated at high current by electrical poles at both ends of the boats at 160 A for 2 hour and then 200 A for 2 hour. The final pellet was sealed in an evacuated silica tube and then annealed in a furnace at 600°C for 12 h. The product, a circular pellet, which had a thickness 1.7 mm and a diameter 13 mm, consisted of two thick layers of Fe on Sb. The four-point probe technique at room temperature was used to measure DC resistivity of the sample on the Fe surface at a constant current of 1.6 mA, where the sample was contacted to four copper wires with silver conducting paint. To remove residual moisture, the sample was placed in a vacuum that was backfilled with helium and then held at a pressure of 760 Torr and a temperature of 293 K.

3. Results and Discussion

Figure 1 shows the X-ray diffraction pattern for the Fe-Sb sample. The many peaks were determined to be Fe and Sb elements. In addition, the presence of some FeSb₂ and FeSb phases was detected. Figure 2 shows the resistivity as a function of time for the Fe-Sb system. It can be seen that the voltage value across the two inside probes decreases gradually with the passage of time. The measured resistance as a function of time (plotted as dotted lines) can be expressed by the exponential function of time ρ=Aexp(-αt)+B, which was proposed in [3]. The corresponding parameter values are A=4.43897 Ωcm, α=0.02136 min⁻¹, and B=1.45282 Ωcm. A good fit was obtained by applying a different fitting function ρ=A₁exp(-α₁t)+A₂exp(-α₂t)-B₀, which was proposed in [4], with fitting parameters A₁=2.9511 Ωcm, α₁=0.03842 min⁻¹, A₂=3.2347 Ωcm, α₂=0.00427 min⁻¹, and B₀=0.08777 Ωcm. The transport properties are dominated by the scattering mechanisms in the sample. Therefore, the decreasing in the resistivity shown in Figure 2 indicates low structural scatterings and phonon scattering, and this leads to enhanced carrier density. This unexpected anomalous result for resistivity behavior was observed at room temperature and at 77-300 K in the Ohmic switches with conducting contacts, and can be described by a power law relation that is derived from the single asperity model, thus demonstrating that the coefficient of the power law is directly related to the creep coefficient and that the prefactor to the power law is related to the initial roughness of the contact [3]. A time-dependent change in the electrical resistivity was also observed in polycrystalline YSZ (Y₂O3 - stabilized ZrO₂) and CSZ (CaO-stabilized ZrO₂) samples at 1100°-1350°C in air, which can be explained by the equilibrium of the association reaction of oxide ion vacancies, VO, and doped cations, YZr or Cazr [4]. The change in resistivity in these samples, which can be expressed by the exponential functions of time, consists of bulk resistance and grain boundary resistance, where bulk resistance changes more rapidly compared with grain boundary resistance. However, this behavior was also observed in a Pt/Co/AlOx/Pt system under sustained voltage application, which suggests that there is electromigration of charged oxygen vacancies near the Co/AlOx interface that are driven by the effective electric field within the dielectric [8].

Figure 1. XRD measurement of the Fe-Sb sample directly after synthesis. All the diffraction peaks are marked by the Fe, Sb, FeSb, FeSb2 phases

Figure 2. Time dependence of the resistivity of the Fe-Sb system. The solid line is a fit of equation ρ=A₁exp(-α₁t)+A₂exp(-α₂t)-B₀

Total resistivity is the sum of residual resistivity ρ₀ due to structural scatterings (such as grain boundary scattering, impurity scattering and surface scattering) and lattice resistivity ρph due to scattering by phonons [5]. Structural scatterings are basically independent of temperature, whereas scattering by phonons is temperature dependent [5], although there is a temperature-independent electron-phonon interaction contribution in the FeSb₂ phase [9]. At the interface of the Fe-Sb system, the current of the conduction electrons flows through the ferromagnetic conducting Fe grains that are in contact with the nonmagnetic semiconducting FeSb2 phase [10,11,12] and FeSb phase. The FeSb₂ has a strong electron-phonon interaction [9], and FeSb phase that showed an almost temperature-independent form of resistivity [13]. Electron-phonon interaction can cause a change in resistivity, where the scattering between electrons and phonons is drastically reduced with an increasing concentration of FeSb₂ and FeSb phases between Fe grains. It has been found that the FeSb₂ phase has giant carrier mobility and a small energy gap [10,11,14]. The time dependence of the resistivity under electric current within the Fe surface could be explained by the electromigration of charged vacancies near the Fe-Sb interface of the Fe grains and the FeSb₂ and FeSb phases. In general, no direct evidence or rule has been presented for predicting the time-dependent resistivity at room temperature. However, certain other factors may also cause changes in the interactions among electrons (i.e., electron scattering and electron-phonon scattering).

4. Summary

The time-dependent change in the electrical resistivity of the Fe-Sb system was investigated by applying a four-point probe to the Fe surface at room temperature. It was determined that the change in resistivity can be expressed by the exponential functions of time. An approach that utilizes the formation of FeSb2 and FeSb phases between the Fe grains at the Fe-Sb interface as a means to improve the time dependence of resistivity would seem to be a very effective way to reduce the voltage value across the two inside probes. Such an approach could be a promising strategy to improve the transition temperature of resistivity for superconducting materials.

References

[1]   | S. J. Singh, J. Prakash, S. Patnaik, A. K. Ganguli, Enhancement of the superconducting transition temperature and upper critical field of LaO0.8F0.2FeAs with antimony doping, Supercond Sci Technol, 22(4). 045017. 2009.
[2]   | T. M. Fayez, K. Ibrahim, Far-infrared probe of energy gap in LaO1-xFxFeGe compound, Phase Transitions: A Multinational Journal, 87(3). 236-242. 2014.
[3]   | O. Rezvanian, C. Brown, M. A. Zikry, A. I. Kingon, J. Krim, D. L. Irving, D. W. Brenner, The role of creep in the time-dependent resistance of Ohmic gold contacts in radio frequency microelectromechanical system devices, Journal of applied physics, 104(2). 024513. 2008.
[4]   | Y. Suzuki, A. Shimada, S. Senda, Time-dependent change in electrical resistivity of polycrystalline YSZ and CSZ. Solid State Ionics, 42(1-2). 121-125. 1990.
[5]   | Z. Cheng, L. Liu, S. Xu, M. Lu, X. Wang, Temperature dependence of electrical and thermal conduction in single silver nanowire, Scientific reports, 5. 10718. 2015.
[6]   | T. M. Fayez, K. Ibrahim, A. A. Abobaker, Semiconductor-superconductor phase transition of the compound LaO0.89F0.11FeSb. Phase Transitions: A Multinational Journal, 90(12). 1256-1260. 2017.
[7]   | J. Ge, S. Cao, S. Shen, J. Zhang, The transport properties in antimony doped iron selenide Fe(Se1-xSbx)0.92 system, Cryogenics, 51(6). 253-256. 2011.
[8]   | A. van den Brink, M. A. J. van der Heijden, H. J. M. Swagten, B. Koopmans, Large time-dependent coercivity and resistivity modification under sustained voltage application in a Pt/Co/AlOx/Pt junction, Journal of applied physics, 117(17). 17C717. 2015.
[9]   | N. Lazarević, Z. V. Popović, Evidence for electron-phonon interaction in Fe1-xMxSb₂ (M=Co and Cr; 0 ≤ x ≤ 0.5) single crystals, Phys Rev B, 81(14). 144302. 2010.
[10]   | C. Petrovic, J. W. Kim, S. L. Bud’ko, A. I. Goldman, P. C. Canfield, Anisotropy and large magnetoresistance in the narrow-gap semiconductor FeSb₂, Phys Rev B, 67(15). 155205. 2003.
[11]   | A. Bentien, S. Johnsen, G. K. H. Madsen, B. B. Iversen, F. Steglich, Colossal Seebeck coefficient in strongly correlated semiconductor FeSb₂, EPL, 80(1). 17008. 2007.
[12]   | R. Hu, R. P. Hermann, F. Grandjean, Y. Lee, J. B. Warren, V. F. Mitrović, C. Petrovic, Weak ferromagnetism in Fe1-xCoxSb₂, Phys Rev B, 76(22). 224422. 2007.
[13]   | C. HaiFeng, L. Jie, L. Shao, Z. Yu, W. Ning, W. Jia, G. YanLi, D. Hui, S. XiaoSong, Z. DongNing, Superconductivity and normal state magnetoresistance in superconducting FeSe:Sb, Sci China Phys Mech Astron, 53(7). 1180-1186. 2010.
[14]   | R. Hu, V. F. Mitrovic, C. Petrovic, Giant carrier mobility in single crystals of FeSb₂, Appl. Phys. Lett., 92(18). 182108. 2008.