Dear Label_Name,

Greetings! I hope you are well.

I am writing on behalf of an international publishing house, Science and Education Publishing, USA (http://www.sciepub.com).

Science and Education Publishing (SciEP) is a multidisciplinary open access publisher of Journals covering the fields of Science, Technology and Medicine. All SciEP publications are subject to high-quality peer review, editorial and production processes and are freely available online.

Welcome to the April, 2013 edition of SciEP newsletter, providing monthly summaries of articles on science & education related topics of interest to scientist and professionals. The mission of our journals is to provide an open access forum for publishing new findings on issues pertinent to scientific and academic field. We also invite you to submit original research papers, review articles, short reports, or case studies are considered for publication in our Multidisciplinary Journals.

American Journal of Public Health Research
DOI: 10.12691/ajphr-1-1-3

The Implementation of a Tele-Homecare System with Service Oriented Architecture and HL7 Message Transmission Standard
Ching-Sung Wang

American Journal of Medical and Biological Research
DOI: 10.12691/ajmbr-1-1-2

The Influence of Ethanol on Pyruvate Kinases Activity in Vivo, in Vitro, in Silico
Lelevich Sergey Vladimirovich, Khrustalev Vladislav Victorovich, Barkovsky Eugene Victorovich, Shedogubova Tatyana Aleksandrovna

American Journal of Medical Sciences and Medicine
DOI: 10.12691/ajmsm-1-1-1

Clinical and Histological Features in Wegener Granulomatosis
Li Cavoli Gioacchino, Passantino Rita, Bono Luisa, Tortorici Calogera, Ferrantelli Angelo, Giammarresi Carlo, Rotolo Ugo

American Journal of Infectious Diseases and Microbiology
DOI: 10.12691/ajidm-1-1-2

The Curse of Lymphatic Filariasis: Would the Continual Use of Diethylcarbamazine Eliminate this Scourge in Papua New Guinea?
Anne Lanham, Lillian Mwanri

We have released issues of some journals on February 2013.
American Journal of Public Health Research
American Journal of Medical Sciences and Medicine
American Journal of Medical and Biological Research
American Journal of Pharmacological Sciences
American Journal of Clinical Medicine Research
American Journal of Nursing Research
American Journal of Cancer Prevention
American Journal of Medicine Studies
American Journal of Infectious Diseases and Microbiology
American Journal of Cardiovascular Disease Research
American Journal of Biomedical Research
American Journal of Mechanical Engineering
American Journal of Microbiological Research
Journal of Preventive Medicine
American Journal of Food and Nutrition
American Journal of Hypertension Research
American Journal of Sports Science and Medicine
Journal of Cancer Research and Treatment
American Journal of Zoological Research
Journal of Biomedical Engineering and Technology
American Journal of Microbiological Research
Biomedical Science and Engineering

We are pleased to announce that submissions are now being accepted for peer review for all the journals across all our subject areas in SciEP.

Please submit your manuscript via our online submission system:
http://www.sciepub.com/author/signin

To unsubscribe from our mailing list, please click on the following link: unsubscribe

I am looking forward to hearing from you.

Kind regards,

David Rain
Email:join@sciepub.com
Science and Education Publishing (http://www.sciepub.com)

Label_Title

Dear Label_Name,

Greetings! I hope you are well.

I am writing on behalf of an international publishing house, Science and Education Publishing, USA (http://www.sciepub.com).

Science and Education Publishing (SciEP) is a multidisciplinary open access publisher of Journals covering the fields of Science, Technology and Medicine. All SciEP publications are subject to high-quality peer review, editorial and production processes and are freely available online.

Welcome to the April, 2013 edition of SciEP newsletter, providing monthly summaries of articles on science & education related topics of interest to scientist and professionals. The mission of our journals is to provide an open access forum for publishing new findings on issues pertinent to scientific and academic field. We also invite you to submit original research papers, review articles, short reports, or case studies are considered for publication in our Multidisciplinary Journals.

American Journal of Public Health Research
DOI: 10.12691/ajphr-1-1-3

The Implementation of a Tele-Homecare System with Service Oriented Architecture and HL7 Message Transmission Standard
Ching-Sung Wang

American Journal of Medical and Biological Research
DOI: 10.12691/ajmbr-1-1-2

The Influence of Ethanol on Pyruvate Kinases Activity in Vivo, in Vitro, in Silico
Lelevich Sergey Vladimirovich, Khrustalev Vladislav Victorovich, Barkovsky Eugene Victorovich, Shedogubova Tatyana Aleksandrovna

American Journal of Medical Sciences and Medicine
DOI: 10.12691/ajmsm-1-1-1

Clinical and Histological Features in Wegener Granulomatosis
Li Cavoli Gioacchino, Passantino Rita, Bono Luisa, Tortorici Calogera, Ferrantelli Angelo, Giammarresi Carlo, Rotolo Ugo

American Journal of Infectious Diseases and Microbiology
DOI: 10.12691/ajidm-1-1-2

The Curse of Lymphatic Filariasis: Would the Continual Use of Diethylcarbamazine Eliminate this Scourge in Papua New Guinea?
Anne Lanham, Lillian Mwanri

We have released issues of some journals on February 2013.
American Journal of Public Health Research
American Journal of Medical Sciences and Medicine
American Journal of Medical and Biological Research
American Journal of Pharmacological Sciences
American Journal of Clinical Medicine Research
American Journal of Nursing Research
American Journal of Cancer Prevention
American Journal of Medicine Studies
American Journal of Infectious Diseases and Microbiology
American Journal of Cardiovascular Disease Research
American Journal of Biomedical Research
American Journal of Mechanical Engineering
American Journal of Microbiological Research
Journal of Preventive Medicine
American Journal of Food and Nutrition
American Journal of Hypertension Research
American Journal of Sports Science and Medicine
Journal of Cancer Research and Treatment
American Journal of Zoological Research
Journal of Biomedical Engineering and Technology
American Journal of Microbiological Research
Biomedical Science and Engineering

We are pleased to announce that submissions are now being accepted for peer review for all the journals across all our subject areas in SciEP.

Please submit your manuscript via our online submission system:
http://www.sciepub.com/author/signin

To unsubscribe from our mailing list, please click on the following link: unsubscribe

I am looking forward to hearing from you.

Kind regards,

David Rain
Email:join@sciepub.com
Science and Education Publishing (http://www.sciepub.com)

Label_Title

Dear Label_Name,

Greetings! I hope you are well.

I am writing on behalf of an international publishing house, Science and Education Publishing, USA (http://www.sciepub.com).

Science and Education Publishing (SciEP) is a multidisciplinary open access publisher of Journals covering the fields of Science, Technology and Medicine. All SciEP publications are subject to high-quality peer review, editorial and production processes and are freely available online.

Welcome to the April, 2013 edition of SciEP newsletter, providing monthly summaries of articles on science & education related topics of interest to scientist and professionals. The mission of our journals is to provide an open access forum for publishing new findings on issues pertinent to scientific and academic field. We also invite you to submit original research papers, review articles, short reports, or case studies are considered for publication in our Multidisciplinary Journals.

American Journal of Public Health Research
DOI: 10.12691/ajphr-1-1-3

The Implementation of a Tele-Homecare System with Service Oriented Architecture and HL7 Message Transmission Standard
Ching-Sung Wang

American Journal of Medical and Biological Research
DOI: 10.12691/ajmbr-1-1-2

The Influence of Ethanol on Pyruvate Kinases Activity in Vivo, in Vitro, in Silico
Lelevich Sergey Vladimirovich, Khrustalev Vladislav Victorovich, Barkovsky Eugene Victorovich, Shedogubova Tatyana Aleksandrovna

American Journal of Medical Sciences and Medicine
DOI: 10.12691/ajmsm-1-1-1

Clinical and Histological Features in Wegener Granulomatosis
Li Cavoli Gioacchino, Passantino Rita, Bono Luisa, Tortorici Calogera, Ferrantelli Angelo, Giammarresi Carlo, Rotolo Ugo

American Journal of Infectious Diseases and Microbiology
DOI: 10.12691/ajidm-1-1-2

The Curse of Lymphatic Filariasis: Would the Continual Use of Diethylcarbamazine Eliminate this Scourge in Papua New Guinea?
Anne Lanham, Lillian Mwanri

We have released issues of some journals on February 2013.
American Journal of Public Health Research
American Journal of Medical Sciences and Medicine
American Journal of Medical and Biological Research
American Journal of Pharmacological Sciences
American Journal of Clinical Medicine Research
American Journal of Nursing Research
American Journal of Cancer Prevention
American Journal of Medicine Studies
American Journal of Infectious Diseases and Microbiology
American Journal of Cardiovascular Disease Research
American Journal of Biomedical Research
American Journal of Mechanical Engineering
American Journal of Microbiological Research
Journal of Preventive Medicine
American Journal of Food and Nutrition
American Journal of Hypertension Research
American Journal of Sports Science and Medicine
Journal of Cancer Research and Treatment
American Journal of Zoological Research
Journal of Biomedical Engineering and Technology
American Journal of Microbiological Research
Biomedical Science and Engineering

We are pleased to announce that submissions are now being accepted for peer review for all the journals across all our subject areas in SciEP.

Please submit your manuscript via our online submission system:
http://www.sciepub.com/author/signin

To unsubscribe from our mailing list, please click on the following link: unsubscribe

I am looking forward to hearing from you.

Kind regards,

David Rain
Email:join@sciepub.com
Science and Education Publishing (http://www.sciepub.com)

Label_Title

Dear Label_Name,

Greetings! I hope you are well.

I am writing on behalf of an international publishing house, Science and Education Publishing, USA (http://www.sciepub.com).

Science and Education Publishing (SciEP) is a multidisciplinary open access publisher of Journals covering the fields of Science, Technology and Medicine. All SciEP publications are subject to high-quality peer review, editorial and production processes and are freely available online.

Welcome to the April, 2013 edition of SciEP newsletter, providing monthly summaries of articles on science & education related topics of interest to scientist and professionals. The mission of our journals is to provide an open access forum for publishing new findings on issues pertinent to scientific and academic field. We also invite you to submit original research papers, review articles, short reports, or case studies are considered for publication in our Multidisciplinary Journals.

American Journal of Public Health Research
DOI: 10.12691/ajphr-1-1-3

The Implementation of a Tele-Homecare System with Service Oriented Architecture and HL7 Message Transmission Standard
Ching-Sung Wang

American Journal of Medical and Biological Research
DOI: 10.12691/ajmbr-1-1-2

The Influence of Ethanol on Pyruvate Kinases Activity in Vivo, in Vitro, in Silico
Lelevich Sergey Vladimirovich, Khrustalev Vladislav Victorovich, Barkovsky Eugene Victorovich, Shedogubova Tatyana Aleksandrovna

American Journal of Medical Sciences and Medicine
DOI: 10.12691/ajmsm-1-1-1

Clinical and Histological Features in Wegener Granulomatosis
Li Cavoli Gioacchino, Passantino Rita, Bono Luisa, Tortorici Calogera, Ferrantelli Angelo, Giammarresi Carlo, Rotolo Ugo

American Journal of Infectious Diseases and Microbiology
DOI: 10.12691/ajidm-1-1-2

The Curse of Lymphatic Filariasis: Would the Continual Use of Diethylcarbamazine Eliminate this Scourge in Papua New Guinea?
Anne Lanham, Lillian Mwanri

We have released issues of some journals on February 2013.
American Journal of Public Health Research
American Journal of Medical Sciences and Medicine
American Journal of Medical and Biological Research
American Journal of Pharmacological Sciences
American Journal of Clinical Medicine Research
American Journal of Nursing Research
American Journal of Cancer Prevention
American Journal of Medicine Studies
American Journal of Infectious Diseases and Microbiology
American Journal of Cardiovascular Disease Research
American Journal of Biomedical Research
American Journal of Mechanical Engineering
American Journal of Microbiological Research
Journal of Preventive Medicine
American Journal of Food and Nutrition
American Journal of Hypertension Research
American Journal of Sports Science and Medicine
Journal of Cancer Research and Treatment
American Journal of Zoological Research
Journal of Biomedical Engineering and Technology
American Journal of Microbiological Research
Biomedical Science and Engineering

We are pleased to announce that submissions are now being accepted for peer review for all the journals across all our subject areas in SciEP.

Please submit your manuscript via our online submission system:
http://www.sciepub.com/author/signin

To unsubscribe from our mailing list, please click on the following link: unsubscribe

I am looking forward to hearing from you.

Kind regards,

David Rain
Email:join@sciepub.com
Science and Education Publishing (http://www.sciepub.com)

Comparative Structural, Optical, and Photovoltaic Characteristics of Ag and Sn-Doped Nanocrystalline CdS Thin Films Deposited by Vacuum Evaporation on FTO Substrates

Baljinder Singh*, Rekha Rani

Department of Physics, S. D. (PG) College, Panipat-132103, Haryana, India

Abstract: Silver (Ag, 1%) and tin (Sn, 1%) doped nanocrystalline cadmium sulfide (CdS) thin films were deposited on fluorine-doped tin oxide (FTO) glass substrates using vacuum evaporation aided by inert gas condensation (IGC) at room temperature (300 K). A hexagonal wurtzite phase with preferential orientation along the (002) plane and high crystalline purity was established by X-ray diffraction and Raman spectroscopy. Optical transmission investigations exhibited a red shift in the band gap to 2.23 eV (Ag) and 2.25 eV (Sn) from bulk CdS (2.42 eV) due to dopant-induced defect states resulting in band tailing. Electrical characterisation exhibited Schottky-type diode behaviour with increased rectification ratio and decreased series resistance for Ag-doped films. Ag-doped and Sn-doped devices illustrated better short-circuit current and fill factor from photovoltaic analysis, and double the sensitivity with ultrafast rise time of photoresponse (rise time ≈ 1.74 µs) in Sn-doped films. The results demonstrate dopant-dependent optimisation of structural and optoelectronic properties in nc-CdS films and suggest Ag doping for photodetectors with high sensitivity and Sn doping for ultrafast optoelectronic switching devices.

Keywords: nanocrystalline, vacuum evaporation, Schottky-type diode, photodetector, optoelectronic switching devices

Received September 15, 2025; Revised October 17, 2025; Accepted October 24, 2025

Citation: Baljinder Singh, Rekha Rani, Comparative Structural, Optical, and Photovoltaic Characteristics of Ag and Sn-Doped Nanocrystalline CdS Thin Films Deposited by Vacuum Evaporation on FTO Substrates. International Journal of Physics, 13 (4). 112-118. January 2025. doi:10.12691/ijp-13-4-4

1. Introduction

Photodetectors and photovoltaic devices are the most rapidly evolving fields in contemporary optoelectronics [1]. While photovoltaics form the core of renewable energy technologies, where maximising efficiency, stability, and low-cost fabrication are the primary challenges, high-speed photodetectors are central to optical communication, imaging, and real-time sensing applications that require ultrafast response and robust performance [2]. The creation of multifunctional materials that can tackle the needs of both energy harvesting and fast photonic detection is thus of extreme scientific and technological relevance [3].

Cadmium sulfide (CdS) is a direct band gap semiconductor (2.42 eV) and finds extensive optoelectronic applications in photodetectors, solar cells, and light sensors owing to its desirable optical and electrical characteristics [4]. Nanocrystalline CdS (nc-CdS) thin films have high surface area, band structure that can be engineered, and defect transport, which makes them promising candidate materials for future photonic devices. Modification of CdS by doping with metal ions is a general approach used to engineer its properties for optimised device performance.

Silver (Ag) and tin (Sn) are significant dopants because their different ionic radii and valence states alter the CdS lattice differently via defect engineering and strain modulation [5,6]. Ag doping usually enhances photoconductivity by minimising recombination centres, whereas Sn doping can increase carrier scattering and alter band structure. Nevertheless, few comparative studies exist on how their influence affects nanocrystalline CdS films deposited under the same conditions.

The structural, optical, and photovoltaic characteristics of 1% Ag- and Sn-doped nc-CdS thin films grown on FTO substrates using vacuum evaporation coupled with inert gas condensation (IGC) are investigated in this study. Careful characterisation by X-ray diffraction (XRD), Raman spectroscopy, optical transmittance, and electrical measurements clarifies the influence of the dopant selection on device-related properties, offering insights for the optimisation of CdS-based optoelectronic devices.

2. Experimental Methods

2.1. Preparation of Ag and Sn-doped CdS Material

The melt quenching method was employed for the synthesis of CdS material. Element components (5 N pure) were put into a quartz ampoule following the measurement of the component amount, according to their atomic percentages. A vacuum of 2 × 10⁻⁵ mbar was maintained while sealing the quartz ampoule [7]. The ampoule was sealed and put in a furnace, and its temperature was increased to a maximum of 1200°C at a rate of 2 to 3 °C per minute. The ampoule was subsequently kept within the furnace at its highest melting point of elements for 24 hours to produce a homogeneous melt. The sealed ampoule was quenched in water at ice temperatures [7].

2.2. Thin-Film Deposition

Thermal vacuum evaporation was employed to deposit thin films on well-degassed clear fluorinated tin oxide (FTO) glass substrates by the inert gas (Ar) condensation (IGC) method using a vacuum coating unit known as HINDHIVAC with model VS-65D. The entire process was carried out at a base pressure of 2 × 10⁻⁵ mbar and ambient temperature. To achieve thermodynamic equilibrium, thin films were left in darkness in a deposition chamber for 24 hours before measurement [7].

2.3. Structural and Optical Characterisation

The structural properties of the nanocrystalline CdS (nc-CdS) thin films were characterised by X-ray diffraction (XRD) measurements carried out using a Spinner 3064 XPERT-PRO X-Ray diffractometer with CuKα radiation (λ=1.54056Å) [7]. The scans were collected at a scan rate of 0.02° per second in a 2θ range of 20° to 70° [8]. Crystallite size and micro-strain were calculated from the peak positions and widths using the Debye–Scherrer formula and strain formulas, respectively. Raman spectroscopy measurements were performed on a Spex Model Ramalog 1403 double monochromator with an RCA 31034A photomultiplier tube, under laser excitation at 532 nm to investigate phonon vibrational modes and crystal quality [9]. Optical transmission and absorption spectra were measured through a Perkin Elmer LAMBDA 750 UV/VIS/NIR computer-controlled spectrophotometer over a wide wavelength range from 300 nm to 2500 nm at room temperature (300 K). The measured spectra permitted the determination of the optical band gap from the conventional Tauc's approach and Lambert–Beer's law for quantitative estimation of the absorption coefficient. The surface microstructure and morphology of the films were investigated by a FE-SEM (SU-8000 Scanning Electron Microscope, model HI-0876-0003) and insights into grain size and film homogeneity were gained.

2.4. Electrical and Photovoltaic Characterisation

Current–voltage (I–V) characterisation in the dark and under illumination by white light at various intensities was conducted using a Keithley electrometer 6517A, which offered both voltage source and current measurement functions. From the measured I–V curves, important diode parameters were determined using the thermionic emission model, such as series resistance (RS), ideality factor (n), reverse saturation current (I₀), and the Schottky barrier height (ΦB). Photovoltaic performance parameters like open-circuit voltage (Voc), short-circuit current (Isc), fill factor (FF), and maximum output power (Pmax) were determined from illuminated I–V data.

2.5. Temporal Response Measurement

The time-resolved photoresponse of the doped CdS thin-film devices was recorded with a pulsed nanosecond Nd: YAG laser at a wavelength of ̴1064 nm. The duration of the laser pulse was ̴10 ns, and the output energy was ̴10 mJ/pulse. In order to improve the signal-to-noise ratio, the sample was embedded in a metallic sample holder specially designed to offer electromagnetic shielding as well as mechanical stability. The electric field-induced photocurrent produced by the devices in response to the laser pulses was recorded with a Digital Phosphor Oscilloscope (Tektronix DPO 4054) that has the Tekvisa interface software for data analysis and acquisition. This configuration allowed accurate measurement of the rise time and fall time of the photodetector signal, key parameters for assessing device speed and its suitability for high-frequency photonic applications.

3. Results and Discussion

3.1. Structural Properties

The SEM micrograph of the prepared samples is shown in Figure 1 (a-b). It is observed from the SEM micrograph that the deposited film consists of spheroid-like grains, which cover the glass substrate well. There are no cracks or pinholes in the micrograph [10].

Figure 1 (c) indicates the XRD patterns of the FTO substrate and Ag- and Sn-doped CdS thin films. The films show well-resolved diffraction peaks of the hexagonal wurtzite phase of CdS (JCPDS card No. 06-0314) with preferred orientation along the (002) plane. There are no secondary or impurity phases, indicating high phase purity.

The interplanar spacing of the (002) plane, d₀₀₂, is calculated from the respective peak position by using the relation [7]:

The crystallite size (D) corresponding to the predominant peak (002) is calculated by using Debye-Scherrer’s formula [7]:

where θ is the Bragg’s diffraction angle, λ (~1.54 Å) is the wavelength of X-ray, and β is the full width at half maxima (FWHM) in radian along the (002) plane. The micro-strain (ε) is estimated by using the formula [7]:

Figure 1. (a-b) SEM images (c) X-ray diffraction patterns (d) Raman spectra of nc-CdS: Ag 1% and nc-CdS: Sn 1% thin films

Tabulated in Table 1 are the calculated d₀₀₂, D and ε values. The calculated values of d₀₀₂, D and ε are tabulated in Table 1. Crystallite size derived from the (002) peak is greater for Ag-doped films (38 nm) than for Sn-doped films (29 nm), agreeing with growth-induced strain differences.

Raman spectroscopy (Figure 1 (d)) indicates dominant peaks at 289 cm⁻¹ and 585 cm⁻¹ in the CdS: Ag (1%) spectrum and likewise at 284 cm⁻¹ and 583 cm⁻¹ in the CdS: Sn (1%), both of which are characteristic of first and second-order longitudinal optical (LO) phonon modes in CdS [11]. The absence of defect or impurity-related modes indicates preservation of the crystal structure upon doping.

3.2. Optical Properties

Figure 2 presents the optical transmission spectra for the nc-CdS: Ag 1% and nc-CdS: Sn 1% (thin films deposited at room temperature (300 K) in the wavelength range of 300–2500 nm. The transmittance (T) is related to the absorption coefficient (α) according to Lambert–Beer’s law as:

where d is the thickness of the film. For the direct band gap semiconductors such as CdS, the fundamental edge of absorption can be modelled using the Tauc relation [12]:

where h is Planck’s constant, ν is the frequency of a photon, Eg is the optical band gap, and A is a constant independent of photon energy. The value of Eg is determined by extrapolating the linear portion of the (αhν)² vs. hν plot to α=0 (insets of Figure 2).

From this study, the optical band gap values were derived and tabulated in Table 1. The optical transmission spectra suggest a red shift of the absorption edge as compared to bulk CdS (2.42 eV), with band gaps reduced to 2.23 eV and 2.25 eV for the Ag and Sn-doped films, respectively. The red shift can be related to defect states near the band edges being induced by the dopants and the resultant lattice strain leading to Urbach tailing. The similar bandgap values suggest that the dopants have a similar influence on the change in electronic structure of the films with slight variations due to ionic size and site occupancy in the CdS matrix.

Figure 2. Optical transmission spectra for the nc-CdS: Ag 1% and nc-CdS: Sn 1% thin films deposited at room temperature (300 K). The inset shows the graph plotting (hνα)² against hν

Table 1. Structural, Vibrational, and Optical Properties of Doped CdS Thin Films

3.3. Electrical and Photovoltaic Behaviour

Figure 3 shows the dark and under white light illumination I-V curves at different intensities for the devices of FTO/nc-CdS: Ag 1% and FTO/nc-CdS: Sn 1%. Both devices show an increase in the current with illumination, and this current improves as we increase the intensity of the light. These behaviours confirm their photoconductive nature not only by increasing the current in both devices under illumination, the I-V curves showing a rectifying behaviour, with rectification ratios evaluated as 1.83 (Ag) and 1.96 (Sn) at ± 3 V, supporting the formation of Schottky-type junctions between the FTO and CdS thin films.

Figure 3. I-V characteristics of FTO/nc-CdS: Ag 1% and FTO/nc-CdS: Sn 1% Schottky diode heterojunctions measured in dark and under light illumination of different intensities

For an ideal Schottky junction, the thermionic emission model describes the forward current in the following manner:

where I₀ is the reverse saturation current, Rₛ is the series resistance, n is the ideality factor, kB is the Boltzmann constant, and T is the absolute temperature [13]. For qV >> kB T, the term -1 becomes negligible. Therefore,

In the high forward bias region, where series resistance dominates, the slope of V vs. I give Rₛ:

, for

The extracted values are tabulated in Table 2. The larger resistance for Sn-doped films suggests stronger carrier scattering or inferior contact quality compared to Ag-doped films.

At low forward bias, the diode equation reduces to:

The ln I vs. V plot gives I₀ from the intercept at V = 0 (Figure 4). The greater I₀ in Sn-doped films indicates greater leakage, possibly due to an increased defect density or poorer barrier control. The ideality factor n values are derived from the slope of ln I vs V (Figure 4). Both ideality factors are well above the theoretical range (1-2), indicating significant non-ideal transport, likely dominated by recombination at grain boundaries, high interface state density, and tunnelling paths in the defect-rich nanocrystalline structure.

The ΦB barrier height is extracted by using the equation [14]:

Where A is the contact area and A* the Richardson constant (≈ 24 A K⁻²cm⁻² for CdS). The calculated values are shown in Table 2. Both values for the barrier height are below the band gap of CdS, as expected for Schottky diodes; the slightly lower value for Sn films indicates more band tailing and interfacial states.

Figure 4. ln I-V plots under forward-bias condition

The potential of nc-CdS: Ag 1% and nc-CdS: Sn 1% devices as photodetectors is confirmed by their rectifying and photosensitive characteristics. The Sn-doped CdS device shows a slightly higher rectification ratio and a lower ideality factor compared to the Ag-doped device. The slightly higher barrier height, much lower series resistance, and lower leakage current of Ag-doped CdS, in contrast, indicate improved junction quality and more efficient charge transport. The high ideality factors in both cases clearly demonstrate non-ideal transport, which is typical of nanocrystalline thin films where grain boundaries and defect-mediated conduction are predominant.

3.4. Photovoltaic and Photodetector Performance

In the presence of light, both devices exhibited photovoltaic behaviour with an open-circuit voltage (Voc), short-circuit current (Isc) and fill factor (FF). The fill factor is given by [15]:

Where Vm and Im are the voltage and current corresponding to the maximum useful power. Both devices showed open-circuit voltages approximately equal to 0.022–0.023 V. Ag-doped films exhibit a fivefold increase in short-circuit current (2.05 µA) with a marginally (2.12%) improved fill factor (31.46%) as compared to the Sn-doped films (0.4168 µA, 29.5%) (Figure 5, Table 2). This indicates a more efficient charge generation and extraction mechanism in the CdS: Ag 1% device, which is likely due to a lower series resistance and better interface properties. However, both systems exhibited relatively high ideality factors and low open circuit voltages when compared with optimised inorganic solar cells, emphasising the impact of grain boundaries, defect states, and interface traps that are common in nanocrystalline thin films.

Table 2. Photovoltaic and Photodetector Parameters of Ag and Sn-Doped CdS Devices

The photodetector performance can be measured in terms of sensitivity (S), responsivity (R) and relative detectivity (D*). The S indicates the relative increase in current, due to illumination and is often utilised as a merit value to indicate signal improvement or photocurrent gain with respect to the dark current. The R is simply defined as the photocurrent per unit incident power per unit area of the photodetector. The D* defines the minimum detectable optical signal, and larger values represent better detection in the presence of noise [16].

Where Ip is the photocurrent, Id the dark current, P the incident light intensity, A the effective device area and e the electronic charge [17]. S, R and D* were calculated for a white light source with an incident intensity of 8.5 mW cm⁻² at zero bias operating voltage using the equations previously mentioned. The estimated values are presented in Table 2. Sn doping doubles the sensitivity compared to Ag doping (0.39 vs. 0.198), suggesting that Sn-doped nc-CdS has a greater current enhancement under illumination. Both materials show low responsivity. The Ag-doped CdS has a much higher detectivity (~10⁷ Jones) compared to Sn-doped (~10⁵ Jones). This means Ag doping improves the ability to detect weak signals, whereas Sn doping increases current response but adds more noise, reducing detectivity.

Figure 5. The photovoltaic characteristics of the devices under halogen light illumination with an intensity of 8.5 mW/cm²

Photodetector’s temporal behaviour is evaluated by rise time (tᵣ) and fall time (tf) parameters. The rise time is characterised by the time the photocurrent takes to rise by 10% to 90% level of Ipeak, and the fall time by the time the photocurrent takes to decrease by 90% to 10% level of Ipeak [18]. An Nd-YAG laser operating at the wavelength of approximately 1064 nm and pulse width and power of approximately 10 ns and 10 mJ, respectively, served as the excitation radiation source. Temporal response analysis reveals Sn-doped films have by far the shortest rise (1.74 µs) and fall (110 µs) times among the Ag-doped films (17 µs rise and 204 µs fall). This exhibits the merits of Sn doping for ultrahigh-speed photonic switching, while Ag doping favours applications requiring a long lifetime of carriers.

Figure 6. Rising and falling edges for estimating rise and fall times

4. Conclusion

Nanocrystalline CdS thin films doped with Sn 1% and Ag 1% were successfully prepared onto FTO substrates by vacuum evaporation using the inert gas condensation technique. The two series of films retained the hexagonal CdS crystal structure, but the dopants extensively transformed their microstructural, optical, and electronic behaviours. Ag-doped films show larger grain size, reduced series resistance, higher barrier height, and superior detectivity and photovoltaic performance, making them ideal for sensitive photodetection and low-noise applications. Sn doping, on the other hand, reduces grain size and micro-strain, adds greater series resistance and leakage current, and lowers overall detectivity and responsivity, balanced by strongly accelerated rise and fall time, suitable for ultrafast optoelectronic switching device applications. The research shows that dopant selection offers a tuneable approach to tailoring CdS nanocrystalline thin films to provide specific device roles, such as very sensitive photovoltaic sensors or very fast photonic switches. Future studies can be directed at the enhancement of doping concentrations and exploration of heterojunction geometries to obtain greater functionality.

ACKNOWLEDGMENT

The authors declare that there are no external agencies or grants related to the research conducted and presented here. The authors would also like to acknowledge their colleagues and peers for the discussions and encouragement relating to this work.

Statement of Competing Interests

The authors have no competing interests.

List of Abbreviations

nc: Nanocrystalline

CdS: Cadmium Sulfide

Ag: Silver

Sn: Tin

FTO: Fluorine-doped Tin Oxide

SEM: Scanning Electron Microscopy

XRD: X-ray Diffraction

Rs: Series Resistance

I₀: Saturation Current

ΦB: Barrier Height

Voc: Open-circuit Voltage

Isc: Short-circuit Current

FF: Fill Factor

R: Responsivity

S: Sensitivity

D*: Detectivity

tr: Rise Time

tf: Fall Time

nm: Nanometer

References

[1]   | Sivanantham, N., Vasanthi, V., Kavinkumar, T., Bhaviripudi, V.R., Mangalaraja, R.V., Srinivasan, R., Chidhambaram, N., Dhanabalan, S.S., Asaithambi, P. and Thirumurugan, A., “Advances in optoelectronics for environmental and energy sustainability,” Next Energy, 9. 100387. 2025.
[2]   | Zhao, Z., Liu, J., Liu, Y. and Zhu, N., “High-speed photodetectors in optical communication system,” Journal of Semiconductors, 38 (12). 121001. Dec. 2017.
[3]   | Butt, M.A., Mateos, X. and Piramidowicz, R., “Photonics sensors: A perspective on current advancements, emerging challenges, and potential solutions (Invited),” Physics Letters A, 516. 129633. 2024.
[4]   | Ingle, R.V., Shaikh, S.F., Kaur, J., Ubaidullah, M., Pandit, B. and Pathan, H.M., “Optical and electronic properties of colloidal cadmium sulfide,” Materials Science and Engineering: B, 294. 116487. 2023.

[5]  
Najm, A.S., Aljuhani, A., Naeem, H.S., Sopian, K., Ismail, R.A., Holi, A.M., Sabri, L.S., Al-Zahrani, A.A., Rasheed, R.T. and Moria, H., “Mechanism and principle of doping: realizing of silver incorporation in CdS thin film via doping concentration effect,” RSC Advances, 12 (46). 29613–29626. Oct. 2022.

[6]  
Willars-Rodríguez, F.J., Chávez-Urbiola, I.R., Hernández-Landaverde, M.A., Vorobiev, P., Ramírez-Bon, R. and Vorobiev, Y.V., “Effects of tin-doping on cadmium sulfide (CdS: Sn) thin-films grown by light-assisted chemical bath deposition process for solar photovoltaic cell,” Thin Solid Films, 653. 341–349. 2018.

[7]   | Singh, B., Singh, J., Kaur, R., Moudgil, R.K. and Tripathi, S.K., “Quantitative measurement of transport properties: Ag-doped nanocrystalline CdS thin films,” RSC Advances, 7 (85). 53951–53962. 2017.
[8]   | Singh, B., Singh, J., Kaur, J., Moudgil, R.K. and Tripathi, S.K., “Thermally and optical induced effects on the structural and electrical parameters of nc-CdS thin films,” Journal of Materials Science: Materials in Electronics, 27. 8701–8709. 2016.

[9]  
Saini, G.S.S., Sharma, A., Singh, S., Abbas, J.M., Tripathi, S.K., Kaur, S., Mahajan, C.G., Thanga, H.H. and Verma, A.L., “Resonance Raman and electronic absorption study of free-base tetraphenylporphine diacid dispersed in polymethylcyanoacrylate,” Journal of Raman Spectroscopy, 38. 1561–1569. 2007.

[10]   | Singh, B., Singh, J., Kaur, J., Moudgil, R.K. and Tripathi, S.K., “Investigations of the drift mobility of carriers and density of states in nanocrystalline CdS thin films,” Physica B: Condensed Matter, 490. 49–56. 2016.
[11]   | Kumar, A., Pednekar, D., Mukherjee, S., et al., “Effect of deposition time and complexing agents on hierarchical nanoflake-structured CdS thin films,” Journal of Materials Science: Materials in Electronics, 31. 17055–17066. 2020.
[12]   | Nazir, A., Toma, A., Abbas Shah, N., Panaro, S., Butt, S., Rehman Sagar, R., Raja, W., Rasool, K. and Maqsood, A., “Effect of Ag doping on opto-electrical properties of CdS thin films for solar cell applications,” Journal of Alloys and Compounds, 609. 40–45. 2014.
[13]   | Zhang, T., Zhang, J., Zhang, W., Zhang, Y., Duan, X., Ning, J. and Hao, Y., “Investigation of an AlGaN-channel Schottky barrier diode on a silicon substrate with a molybdenum anode,” Semiconductor Science and Technology, 36 (4). 044003. 2021.
[14]   | Wu, D., Jiang, Y., Zhang, Y.G., Yu, Y.Q., Zhu, Z.F., Lan, X.Z., Li, F.Z., Wu, C.Y., Wang, L. and Luo, L.B., “Self-powered and fast-speed photodetectors based on CdS:Ga nanoribbon/Au Schottky diodes,” Journal of Materials Chemistry, 22. 23272–23276. 2012.
[15]   | Xie, C., Luo, L.B., Zeng, L.H., Zhu, L., Chen, J.J., Nie, B., Hu, J.G., Li, Q., Wu, C.Y., Wang, L. and Jie, J.S., “p-CdTe nanoribbon/n-silicon nanowires array heterojunctions: Photovoltaic devices and zero-power photodetectors,” CrystEngComm, 14. 7222–7228. 2012.
[16]   | Zhang, J., Wang, Y., Zhou, B. and Li, J., “Research on FTO/CBD-CdS:Cl thin film photodetector with a vertical structure,” Applied Physics A, 127. 678. 2021.
[17]   | Wang, J., Chang, Y., Huang, L., Jin, K. and Tian, W., “Designing CdS/Se heterojunction as high-performance self-powered UV-visible broadband photodetector,” APL Materials, 6 (7). 076106. Jul. 2018.
[18]   | Feria, D.N., Wu, G.H., Chiang, C.W., Lin, Y.C., Kao, K.T., Lian, J.T. and Lin, T.Y., “Enhanced long-term stability of ambient-fabricated perovskite photodetectors via microwave-assisted synthesis,” Journal of Alloys and Compounds, 1030. 180779. 2025