Dear Label_Name,

Greetings! I hope you are well.

I am writing on behalf of an international publishing house, Science and Education Publishing, USA (http://www.sciepub.com).

Science and Education Publishing (SciEP) is a multidisciplinary open access publisher of Journals covering the fields of Science, Technology and Medicine. All SciEP publications are subject to high-quality peer review, editorial and production processes and are freely available online.

Welcome to the April, 2013 edition of SciEP newsletter, providing monthly summaries of articles on science & education related topics of interest to scientist and professionals. The mission of our journals is to provide an open access forum for publishing new findings on issues pertinent to scientific and academic field. We also invite you to submit original research papers, review articles, short reports, or case studies are considered for publication in our Multidisciplinary Journals.

American Journal of Public Health Research
DOI: 10.12691/ajphr-1-1-3

The Implementation of a Tele-Homecare System with Service Oriented Architecture and HL7 Message Transmission Standard
Ching-Sung Wang

American Journal of Medical and Biological Research
DOI: 10.12691/ajmbr-1-1-2

The Influence of Ethanol on Pyruvate Kinases Activity in Vivo, in Vitro, in Silico
Lelevich Sergey Vladimirovich, Khrustalev Vladislav Victorovich, Barkovsky Eugene Victorovich, Shedogubova Tatyana Aleksandrovna

American Journal of Medical Sciences and Medicine
DOI: 10.12691/ajmsm-1-1-1

Clinical and Histological Features in Wegener Granulomatosis
Li Cavoli Gioacchino, Passantino Rita, Bono Luisa, Tortorici Calogera, Ferrantelli Angelo, Giammarresi Carlo, Rotolo Ugo

American Journal of Infectious Diseases and Microbiology
DOI: 10.12691/ajidm-1-1-2

The Curse of Lymphatic Filariasis: Would the Continual Use of Diethylcarbamazine Eliminate this Scourge in Papua New Guinea?
Anne Lanham, Lillian Mwanri

We have released issues of some journals on February 2013.
American Journal of Public Health Research
American Journal of Medical Sciences and Medicine
American Journal of Medical and Biological Research
American Journal of Pharmacological Sciences
American Journal of Clinical Medicine Research
American Journal of Nursing Research
American Journal of Cancer Prevention
American Journal of Medicine Studies
American Journal of Infectious Diseases and Microbiology
American Journal of Cardiovascular Disease Research
American Journal of Biomedical Research
American Journal of Mechanical Engineering
American Journal of Microbiological Research
Journal of Preventive Medicine
American Journal of Food and Nutrition
American Journal of Hypertension Research
American Journal of Sports Science and Medicine
Journal of Cancer Research and Treatment
American Journal of Zoological Research
Journal of Biomedical Engineering and Technology
American Journal of Microbiological Research
Biomedical Science and Engineering

We are pleased to announce that submissions are now being accepted for peer review for all the journals across all our subject areas in SciEP.

Please submit your manuscript via our online submission system:
http://www.sciepub.com/author/signin

To unsubscribe from our mailing list, please click on the following link: unsubscribe

I am looking forward to hearing from you.

Kind regards,

David Rain
Email:join@sciepub.com
Science and Education Publishing (http://www.sciepub.com)

Label_Title

Dear Label_Name,

Greetings! I hope you are well.

I am writing on behalf of an international publishing house, Science and Education Publishing, USA (http://www.sciepub.com).

Science and Education Publishing (SciEP) is a multidisciplinary open access publisher of Journals covering the fields of Science, Technology and Medicine. All SciEP publications are subject to high-quality peer review, editorial and production processes and are freely available online.

Welcome to the April, 2013 edition of SciEP newsletter, providing monthly summaries of articles on science & education related topics of interest to scientist and professionals. The mission of our journals is to provide an open access forum for publishing new findings on issues pertinent to scientific and academic field. We also invite you to submit original research papers, review articles, short reports, or case studies are considered for publication in our Multidisciplinary Journals.

American Journal of Public Health Research
DOI: 10.12691/ajphr-1-1-3

The Implementation of a Tele-Homecare System with Service Oriented Architecture and HL7 Message Transmission Standard
Ching-Sung Wang

American Journal of Medical and Biological Research
DOI: 10.12691/ajmbr-1-1-2

The Influence of Ethanol on Pyruvate Kinases Activity in Vivo, in Vitro, in Silico
Lelevich Sergey Vladimirovich, Khrustalev Vladislav Victorovich, Barkovsky Eugene Victorovich, Shedogubova Tatyana Aleksandrovna

American Journal of Medical Sciences and Medicine
DOI: 10.12691/ajmsm-1-1-1

Clinical and Histological Features in Wegener Granulomatosis
Li Cavoli Gioacchino, Passantino Rita, Bono Luisa, Tortorici Calogera, Ferrantelli Angelo, Giammarresi Carlo, Rotolo Ugo

American Journal of Infectious Diseases and Microbiology
DOI: 10.12691/ajidm-1-1-2

The Curse of Lymphatic Filariasis: Would the Continual Use of Diethylcarbamazine Eliminate this Scourge in Papua New Guinea?
Anne Lanham, Lillian Mwanri

We have released issues of some journals on February 2013.
American Journal of Public Health Research
American Journal of Medical Sciences and Medicine
American Journal of Medical and Biological Research
American Journal of Pharmacological Sciences
American Journal of Clinical Medicine Research
American Journal of Nursing Research
American Journal of Cancer Prevention
American Journal of Medicine Studies
American Journal of Infectious Diseases and Microbiology
American Journal of Cardiovascular Disease Research
American Journal of Biomedical Research
American Journal of Mechanical Engineering
American Journal of Microbiological Research
Journal of Preventive Medicine
American Journal of Food and Nutrition
American Journal of Hypertension Research
American Journal of Sports Science and Medicine
Journal of Cancer Research and Treatment
American Journal of Zoological Research
Journal of Biomedical Engineering and Technology
American Journal of Microbiological Research
Biomedical Science and Engineering

We are pleased to announce that submissions are now being accepted for peer review for all the journals across all our subject areas in SciEP.

Please submit your manuscript via our online submission system:
http://www.sciepub.com/author/signin

To unsubscribe from our mailing list, please click on the following link: unsubscribe

I am looking forward to hearing from you.

Kind regards,

David Rain
Email:join@sciepub.com
Science and Education Publishing (http://www.sciepub.com)

Influence of Electron Transport Layer and Hole Transport Layer on the Performance of Perovskite-based Solar Cells (PSCs)

Issiaka sankara*, Soumaïla ouedraogo, Boureima traore, Adama zongo, Abdoulaye kabre, Daouda oubda, François Zougmoré

Département de Physique, Laboratoire de Matériaux et Environnement (LA.ME) - UFR/SEA, Université Joseph Ki-Zerbo, Ouagadougou, Burkina Faso

Abstract: Photovoltaic solar cells are currently the focus of many research projects to produce low-cost, high-quality solar cells. With this in mind, third-generation solar cells are positioned as an alternative to conventional solar cells. Perovskite-based solar cells are the focus of much interest because of their exciting optoelectronic properties. Knowledge of the properties of this cell is necessary to design high-quality solar cells. Our study is based on the influence of the electron (TiO₂) and hole (Spiro-OMeTAD) transport layers on the performance of the perovskite solar cell (PSCs). For this research, we used the Solar Cell Capacitance Simulator in 1 Dimension (SCAPS-1D) software, developed by the University of Gent in Belgium, to carry out numerical simulations on a perovskite solar cell. The calculation methodology is based on the finite difference method and integrates the transport properties, Poisson, and continuity equations, using predefined boundary conditions. Through this simulation, we studied the influence of the thickness variation and the electron transport layer's doping. In addition, we examined the doping and the mobility of the holes in the 2,2′,7,7′ tetrakis (N, N-di-p-methoxyphenylamine)-9,9′-spirobifluorene (Spiro-OMeTAD) layer on the performance of perovskite solar cell (PSCs). Good stabilities are observed when the doping of the electron transport layer is of the order of 10¹⁴cm⁻³ for an ultra-thin thickness and optimum values are obtained for a doping of 10²⁰cm⁻³ and a mobility greater than 10⁻³cm²/Vs in the HTL layer.

Keywords: Perovskite, Mobility, Doping, Defect density

Received January 20, 2025; Revised February 22, 2025; Accepted March 01, 2025

Citation: Issiaka sankara, Soumaïla ouedraogo, Boureima traore, Adama zongo, Abdoulaye kabre, Daouda oubda, François Zougmoré, Influence of Electron Transport Layer and Hole Transport Layer on the Performance of Perovskite-based Solar Cells (PSCs). International Journal of Physics, 13 (1). 16-20. January 2025. doi:10.12691/ijp-13-1-3

1. Introduction

The performance of the perovskite solar cell (PSCs) is generally based on several parameters, including the impact of window layers such as titanium dioxide (TiO₂) and 2,2′,7,7′ tetrakis (N, N-di-p-methoxyphenylamine)-9,9′-spirobifluorene (Spiro-OMeTAD). TiO₂ is a semiconductor material used as a transparent mesoporous layer for transporting electrons in (PSCs) [1]. It is a material of great interest due to its non-toxic nature, unique optical and electrical properties, low cost, high chemical stability, and stability against corrosion [2]. Spiro-OMeTAD is used to transport holes in perovskite-based solar cells [3]. Initially used in DSSCs by Michael Grätzel's team in 1998 [4], Spiro-OMeTAD is still the hole-conducting layer in perovskite photovoltaic cells. Despite the significant advances made over the last few decades in developing TiO₂ and Spiro-OMeTAD-based nanomaterials, knowledge of the properties of these two layers remains a major challenge in the scientific field. This paper explores the impact of certain parameters of these two layers on the performance of the perovskite solar cell. To do this, we used the numerical simulation software Solar Cell Capacitance Simulator in 1 Dimension (SCAPS 1-D) [5], with well-defined input parameters to conduct the simulation. The methodology used for the simulation with SCAPS 1-D is based on the finite difference method with the solution of equations with well-defined boundary conditions. In this paper, we will first evaluate the impact of varying the thickness of the TiO₂ layer, the influence of defect density in the TiO₂ layer as a function of thickness, and the impact of TiO₂ layer doping and mobility on cell stability. Secondly, an assessment will be made of the impact of the doping and thickness of the Spiro-OMeTAD layer, the impact of mobility and doping, and, finally, the impact of mobility and thickness on the stability of the perovskite solar cell. Good performances are observed with doping the TiO₂ layer of the order of 10¹⁴ cm⁻³ for an ultra-thin thickness, while optimum values are achieved with doping of 10²⁰ cm⁻³ and mobility greater than 10⁻³ cm²/Vs in the TiO₂ layer.

2. Materials and Methods

2.1. The Structure of the Solar Cell Studied

Figure 1 shows the structure of a perovskite-based solar cell. It comprises a glass substrate to which FTO-doped tin oxide is applied. Titanium dioxide is deposited on top of the Fluorine-doped Tin Oxide (FTO) and acts as an electron transport layer (ETL). The active layer is made of perovskite material. To optimize hole transport, a layer of spiro-OMeTAD (HTL) is inserted between the gold electrode and the active layer.

Figure 1. Structure of a perovskite cell

2.2. Fundamental Equations for Simulation Software

Several years of research into the physics of semiconductor-based devices have led to the development of mathematical models. These models are essentially based on solving the Poisson and continuity equations for electrons and holes.

2.3. Poisson Equation

[picture] | (1)

E: Represents the electric field

ε is the dielectric permittivity, and ρ is the volume density of the free charges

2.4. Continuity Equations

[picture] | (2)

[picture] | (3)

R(x) and G(x) are the electron and hole recombination rates respectively; Jn and Jp are the electron and hole current densities

3. Results and Discussion

The results of the numerical simulation of a perovskite solar cell using the SCAPS-1D software allowed us to determine the impact of the electron transport layer and hole transport layers on the performance of the perovskite solar cell (PSCs). These parameters include variation in titanium dioxide (TiO₂) layer thickness, the defect density in the TiO₂ layer, and as a function of thickness, TiO₂ layer doping and mobility, the influence of 2,2′,7,7′-tetrakis (N, N-di-p-methoxyphenylamine)-9,9′ spirobifluorene (Spiro-OMeTAD) layer doping and thickness, influence of mobility and doping, and influence of mobility and thickness on cell performance. The optimum parameters obtained could be used to manufacture perovskite-based solar cells that perform better than conventional solar cells.

3.1. Influence of TiO₂ Layer Thickness Variation on Electrical Parameters

Figure 2. Influence of TiO₂ layer thickness on electrical parameters

Figure 2 illustrates the effect of the thickness of the TiO₂ window layer on the electrical parameters of a perovskite solar cell. The data indicate that varying the thickness of the electron transport layer significantly influences the solar cell's performance, with all electrical parameters decreasing as the thickness increases. This decline in performance may be attributed to the composition of the perovskite material, the properties of the other underlying cell layers, and the manufacturing conditions [6]. At the open-circuit voltage (VOC) level, the thickness of the TiO₂ layer impacts the Fermi level and the contact barrier between the perovskite and the TiO₂ electrode. Excessive thickness can cause a shift in the Fermi levels, reducing the Conversely, a layer that is too thin can lead to current leakage, further decreasing the voltage (VOC) [7]. For the short-circuit current density (JSC) the TiO₂ layer thickness affects the amount of light absorbed by the perovskite. An excessively thick layer may absorb a significant portion of the incident light, reducing (JSC). On the other hand, a layer that is too thin may allow excessive light transmission, also negatively impacting the current density [8]. Regarding the fill factor (FF), which characterizes the efficiency of extracting maximum power from the incident light, the TiO₂ layer thickness can affect the FF by promoting recombination losses and increasing the cell's internal resistance. Finally, concerning overall efficiency, a TiO₂ layer that is too thin reduces the distance electrons must travel to reach the electrode, potentially minimizing recombination losses and improving energy conversion efficiency.

3.2. Influence of Defect Density in the T iO₂ Layer and as a Function of Thickness

Figure 3. Influence of defect density in the TiO₂ layer and thickness on electrical parameters

Figure 3 illustrates the variation in defect density and the thickness of the TiO₂ layer on the electrical parameters of a perovskite solar cell. It shows similar trends to those observed in Figure 2, where all parameters decrease as the thickness increases. This observation suggests that variations in defect density within the transport layer may not significantly affect the electrical parameters [4]. However, this interpretation may not be entirely accurate. In our study, this trend could be explained by the fact that a high defect density in the TiO₂ layer leads to increased charge carrier recombination, which consequently reduces the open-circuit voltage VOC [9]. Additionally, a thicker TiO₂ layer increases the distance that charge carriers must travel to reach the contacts, further exacerbating recombination losses and reducing VOC. The optimal thickness of the TiO₂ layer depends on several factors, including charge carrier mobility and defect density. Regarding the fill factor (FF) and efficiency, a high defect density or an inappropriate thickness can decrease the FF due to recombination losses, ultimately reducing the overall performance of the solar cell [10].

3.3. Influence of spiro-OMeTAD Layer Doping and Thickness on Electrical Parameters

Figure 4 illustrates the influence of spiro-OMeTAD-based hole transport layer (HTM) doping and thickness on the electrical parameters VOC, JSC, FF, and efficiency in a perovskite solar cell. In this study, doping concentrations were varied from 10¹²cm⁻³ to 10²⁰cm⁻³ and HTM thickness ranged from 0.02 μm to 0.1 μm. It was observed that all electrical parameters exhibited a similar trend, with improved values as doping concentration and thickness increased. The optimal values were achieved at a doping concentration of 10²⁰cm⁻³ across all electrical parameters. This behavior can be attributed to the effect of HTM doping on hole mobility, which facilitates the transport of holes from the perovskite layer to the cell contacts. Higher doping enhances the electrical conductivity of the HTM layer, thereby reducing voltage losses and improving VOC. However, excessive doping may decrease hole mobility and increase recombination losses, ultimately reducing overall cell efficiency [11]. Similarly, while increasing HTM thickness can initially improve performance, excessively thick layers can result in higher electrical resistance and greater voltage losses, leading to reduced VOC and JSC [12].

Figure 4. Influence of doping and HTM layer thickness on electrical parameters

3.4. Influence of Mobility and Doping on Electrical Parameters

Figure 5 illustrates the influence of hole mobility and doping levels in the hole transport layer on the performance of perovskite solar cells. It is evident that hole mobility significantly impacts the overall electrical parameters. In Figure 5(a), high VOC values are observed for a doping concentration of 10¹⁶cm⁻³ and a mobility of 10⁻³cm²/Vs [13]. This result arises from the combined optimization of mobility and doping, enabling rapid charge carrier transport and reducing recombination losses, while optimal doping enhances conductivity and minimizes losses in the HTM layer [14]. In Figures 5(b), 5(c), and 5(d), all parameters progressively increase for mobilities ranging between 10⁻⁴ and 10⁻³cm²/Vs, all the parameters increase progressively, beyond 10⁻³cm²/Vs, the parameters tend to stabilize. These variations can be attributed to the high hole mobility in the HTM layer, which facilitates efficient charge carrier transport, reduces recombination losses, and improves overall cell efficiency[15] . Furthermore, the doping concentration of the HTM layer plays a crucial role in influencing the electrical parameters such as electrical conductivity. Optimal doping can increase conductivity, which can reduce voltage losses and improve open circuit voltage VOC and current density JSC [16].

Figure 5. Influence of mobility and doping on electrical parameters

3.5. Influence of Mobility and Thickness on Electrical Parameters

Figure 6. Influence of mobility and thickness on electrical parameters

Figure 6 illustrates the variation in hole mobility as a function of the thickness of the hole transport material layer. It is observed that all electrical parameters decline for a mobility range between 10-4 to 10-2cm2/Vs, and a thickness between 0.02 to 0.04 μm. However, a positive trend is noted as the hole mobility increases, as shown in Figures 6(c) and 6(d). This favorable trend could be attributed to improved hole mobility and optimal thickness. Additionally, a mobility of 10⁻⁴ cm²/Vs appears too low to collect holes, leading to efficient recombination. This explains the decrease in all electrical parameters for low hole mobility in the hole transport material [17].

4. Conclusion

This study investigated the properties of the TiO₂ and spiro-OMeTAD layers on the performance of the perovskite solar cells (PSCs). Through this simulation, we found that for the performance of the solar cells (PSCs), the quality of the TiO₂ and spiro-OMeTAD window layers must be optimal to collect charge carriers at the contacts efficiently. Good performances are observed when the doping of the TiO₂ layer is of the order of 10¹⁴cm⁻³ for an ultra-thin thickness and optimum values are obtained for a doping of 10²⁰cm⁻³ and a mobility greater than 10⁻³cm²/Vs in the spiro-OMeTAD.

ACKNOWLEDGMENTS

The authors acknowledge using the SCAPS-1D program developed by Burgelman and colleagues at the University of Gent in all simulations reported in this article.

References

[1]   | T. Zhu, «Pérovskites hybrides et ingénierie d’interface pour l’amélioration des dispositifs optoélectroniques».
[2]   | N. Islam, M. Yang, K. Zhu, et Z. Fan, «Mesoporous scaffolds based on TiO ₂ nanorods and nanoparticles for efficient hybrid perovskite solar cells», J. Mater. Chem. A, vol. 3, no 48, p. 24315‑24321, 2015.
[3]   | M. A. Green et A. Ho-Baillie, «Perovskite Solar Cells: The Birth of a New Era in Photovoltaics», ACS Energy Lett., vol. 2, no 4, p. 822‑830, avr. 2017.
[4]   | X. Wu et al., «Two-dimensional modeling of TiO2 nanowire based organic–inorganic hybrid perovskite solar cells», Sol.
[5]   | W. H. Nguyen, C. D. Bailie, E. L. Unger, et M. D. McGehee, «Enhancing the Hole-Conductivity of Spiro-OMeTAD without Oxygen or Lithium Salts by Using Spiro(TFSI) ₂ in Perovskite and Dye-Sensitized Solar Cells», J. Am. Chem. Soc., vol. 136, no 31, p. 10996‑11001, août 2014.
[6]   | M. Afroz, R. K. Ratnesh, S. Srivastava, et J. Singh, «Perovskite solar cells: Progress, challenges, and future avenues to clean energy», Sol. Energy, vol. 287, p. 113205, 2025.
[7]   | M. Mahmood et al., «Advancing perovskite solar cells: Unveiling the superior efficiency of copper-doped Strontium Titanate as a novel ETL», Sol. Energy, vol. 279, p. 112806, 2024.
[8]   | A. Raj et al., «Effect of doping engineering in TiO2 electron transport layer on photovoltaic performance of perovskite solar cells», Mater. Lett., vol. 313, p. 131692, 2022.
[9]   | J. Verschraegen et M. Burgelman, «Numerical modeling of intra-band tunneling for heterojunction solar cells in SCAPS», Thin Solid Films, vol. 515, no 15, p. 6276‑6279, 2007.
[10]   | P. Kumari, S. Prasanthkumar, et L. Giribabu, «Recent progress on perovskite based indoor photovoltaics: Challenges and commercialization», Sol. Energy, vol. 284, p. 113049, 2024.
[11]   | P. Yuan et al., «High‐Performance Perovskite Solar Cells Using Iodine as Effective Dopant for Spiro‐OMeTAD», Energy Technol., vol. 8, no 5, p. 1901171, mai 2020.
[12]   | M. Hu, L. Liu, A. Mei, Y. Yang, T. Liu, et H. Han, «Efficient hole-conductor-free, fully printable mesoscopic perovskite solar cells with a broad light harvester NH 2 CH [double bond, length as m-dash] NH 2 PbI 3», J. Mater. Chem. A, vol. 2, no 40, p. 17115‑17121, 2014.
[13]   | J. Liu et al., «A dopant-free hole-transporting material for efficient and stable perovskite solar cells», Energy Environ. Sci., vol. 7, no 9, p. 2963‑2967, 2014.
[14]   | W. Ling, F. Liu, Q. Li, et Z. Li, «The crucial roles of the configurations and electronic properties of organic hole-transporting molecules to the photovoltaic performance of perovskite solar cells», J. Mater. Chem. A, vol. 9, no 34, p. 18148‑18163, 2021.
[15]   | P. Docampo, J. M. Ball, M. Darwich, G. E. Eperon, et H. J. Snaith, «Efficient organometal trihalide perovskite planar-heterojunction solar cells on flexible polymer substrates», Nat. Commun., vol. 4, no 1, p. 2761, 2013.
[16]   | Y.-F. Gu, H.-J. Du, N.-N. Li, L. Yang, et C.-Y. Zhou, «Effect of carrier mobility on performance of perovskite solar cells*», Chin. Phys. B, vol. 28, no 4, p. 048802, avr. 2019.
[17]   | M. Neophytou et al., «High mobility, hole transport materials for highly efficient PEDOT: PSS replacement in inverted perovskite solar cells», J. Mater. Chem. C, vol. 5, no 20, p. 4940‑4945, 2017.