Dear Label_Name,

Greetings! I hope you are well.

I am writing on behalf of an international publishing house, Science and Education Publishing, USA (http://www.sciepub.com).

Science and Education Publishing (SciEP) is a multidisciplinary open access publisher of Journals covering the fields of Science, Technology and Medicine. All SciEP publications are subject to high-quality peer review, editorial and production processes and are freely available online.

Welcome to the April, 2013 edition of SciEP newsletter, providing monthly summaries of articles on science & education related topics of interest to scientist and professionals. The mission of our journals is to provide an open access forum for publishing new findings on issues pertinent to scientific and academic field. We also invite you to submit original research papers, review articles, short reports, or case studies are considered for publication in our Multidisciplinary Journals.

American Journal of Public Health Research
DOI: 10.12691/ajphr-1-1-3

The Implementation of a Tele-Homecare System with Service Oriented Architecture and HL7 Message Transmission Standard
Ching-Sung Wang

American Journal of Medical and Biological Research
DOI: 10.12691/ajmbr-1-1-2

The Influence of Ethanol on Pyruvate Kinases Activity in Vivo, in Vitro, in Silico
Lelevich Sergey Vladimirovich, Khrustalev Vladislav Victorovich, Barkovsky Eugene Victorovich, Shedogubova Tatyana Aleksandrovna

American Journal of Medical Sciences and Medicine
DOI: 10.12691/ajmsm-1-1-1

Clinical and Histological Features in Wegener Granulomatosis
Li Cavoli Gioacchino, Passantino Rita, Bono Luisa, Tortorici Calogera, Ferrantelli Angelo, Giammarresi Carlo, Rotolo Ugo

American Journal of Infectious Diseases and Microbiology
DOI: 10.12691/ajidm-1-1-2

The Curse of Lymphatic Filariasis: Would the Continual Use of Diethylcarbamazine Eliminate this Scourge in Papua New Guinea?
Anne Lanham, Lillian Mwanri

We have released issues of some journals on February 2013.
American Journal of Public Health Research
American Journal of Medical Sciences and Medicine
American Journal of Medical and Biological Research
American Journal of Pharmacological Sciences
American Journal of Clinical Medicine Research
American Journal of Nursing Research
American Journal of Cancer Prevention
American Journal of Medicine Studies
American Journal of Infectious Diseases and Microbiology
American Journal of Cardiovascular Disease Research
American Journal of Biomedical Research
American Journal of Mechanical Engineering
American Journal of Microbiological Research
Journal of Preventive Medicine
American Journal of Food and Nutrition
American Journal of Hypertension Research
American Journal of Sports Science and Medicine
Journal of Cancer Research and Treatment
American Journal of Zoological Research
Journal of Biomedical Engineering and Technology
American Journal of Microbiological Research
Biomedical Science and Engineering

We are pleased to announce that submissions are now being accepted for peer review for all the journals across all our subject areas in SciEP.

Please submit your manuscript via our online submission system:
http://www.sciepub.com/author/signin

To unsubscribe from our mailing list, please click on the following link: unsubscribe

I am looking forward to hearing from you.

Kind regards,

David Rain
Email:join@sciepub.com
Science and Education Publishing (http://www.sciepub.com)

Eco-Friendly Treatment of Acid Red by an Application of Pseudomonas spp

Maulin P Shah

Industrial Waste Water Research Laboratory Division of Applied & Environmental Microbiology Enviro Technology Limited Plot GIDC, Ankleshwar Gujarat, India

Abstract: Acid red decolorizing bacteria was isolated and identified as Pseudomonas spp. The effect of operation parameters such as medium composition, pH, temperature, dye concentration on the decolorization of acid red was studied and the products of degradation were analyzed and confi rmed using LC–MS analysis. The reductive cleavage of azo bond was catalyzed by azoreductase, the key enzyme for the azo dye degradation. The catalytic reduction of acid red 37 by purifi ed azoreductase in the presence of NADH as electron donor was studied and the products of degradation were determined as 1-{3-amino-5- [(aminoxy) sulfonyl] phenyl} ethanol and 7,8- diamino-3 [(aminoxy) sulfonyl] naphthalene-1-ol.

Keywords: acid red, pseudomonas, LC-MS, azo reductase

Received April 14, 2014; Revised April 16, 2014; Accepted April 17, 2014

Citation: Maulin P Shah, Eco-Friendly Treatment of Acid Red by an Application of Pseudomonas spp. International Journal of Environmental Bioremediation & Biodegradation, 2 (2). 62-68. January 2014. doi:10.12691/ijebb-2-2-3

1. Introduction

Dyes are intensely colored organic compounds having widespread applications; in textile industries for dyeing nylon, polyacylonitrile, modified nylon, wool, silk, cotton etc. Over 10,000 dyes with an annual production of over 7×105 metric tons are commercially available [1]. Approximately 50% of these dyes are released in the industrial effluents [2]. It is estimated that 10-70 L of water is required for processing one meter of cloth and that produces about 20-30 mgL-1 of BOD (Biochemical Oxygen Demand). An industry having production capacity of approximately 35,000 md⁻¹ consumes 1000 KL water d⁻¹ and about 800 KL dyes containing effluent d-1 [3]. Dyes are designed in such a way that they are resistant to light, water and oxidizing agents and, therefore, these dyes cannot be treated by conventional treatment processes such as an activated sludge [4]. Dye colors are visible in water concentration as low as 1 mg/l, whereas textile processing waste water normally contains more than 10-200 mg/l of dye [5]. A major environmental problem facing the textile dyeing industry is that the industry produces large volumes of high strength aqueous waste continuously. Wastewater containing recalcitrant residues into rivers and lakes lead to higher biological oxygen demand posing a serious threat to native aquatic life [6] and have toxic and carcinogenic effect in mammals [7]. The problem of environmental pollution is increasing day by day due to the release of xenobiotic substances into water, soil and air. These substances include organic compounds (pesticides, dyes, polymers etc.) and heavy metal ions. The damage caused by these pollutants to plants, animals and humans cannot be neglected and hence strategies must be developed to solve the problem of environmental pollution on the priority basis. Removal of dyes from the effluents or their degradation before discharge is a great environmental challenge for the industries [8]. Generally used physiochemical methods adsorption, floatation, coagulation, incineration, neutralization, reduction, oxidation, electrolysis and ion-exchange; are effective and efficiently remove dyes from the effluents but produced large sludge and by products which are more toxic. Biological processes like aerobic, anaerobic and bioaugmentation and biostimulation are getting more attention as they are cost effective, easy to use, ecofriendly and convert organic compounds completely into water and carbon dioxide [9]. Microbial communities are of primary importance in degradation of dye contaminated soils and water, as microorganisms alters to dye chemistry and mobility through reduction, accumulation, mobilization and immobilization. A number of biotechnological approaches have been suggested as of potential interest towards combating this pollution source in an eco-efficient manner by use of bacteria, fungi and algae for various bioremediation processes. Keeping in view the above points, the present study was undertaken to optimize various parameters and evaluate the potential of the isolate. Various parameters such as agitation, temperature, pH and different dye concentration required to achieve maximum dye decolorization were standardized. The organism effectively degrades the dye by the partially purified enzyme azoreductase. The enzyme and whole cell culture tested for their efficiency to degrade acid red and the intermediates products formed were analyzed by liquid chromatography and mass spectroscopy (LC–MS).

2. Materials and Methods

2.1. Dyes and Chemicals

Acid red was a generous gift from local textile industry of Ankleshwar, Gujarat, India, used to prepare the stock solution, which was filter sterilized and added to the growth medium at required concentrations. All the chemicals used were of analytical grade and procured from Himedia Pvt. Limited, Mumbai. The materials required for PCR amplification (Taq polymerase, dNTPs, primers) were obtained from Bio-Red, USA.

2.2. Isolation and Screening of Dye Decolourising Bacterium

Soil samples contaminated with textile dye effluent were collected from different vicinities in Ankleshwar and were used as a source to isolate morphologically distinct bacterial colonies capable for decolourising acid red. The soil samples were subjected to enrichment culture technique using nutrient broth amended with increasing concentrations of dye (100 mg/L 500 mg/L) with incubation time of 24 h at 37°C. Repeated transfers were carried out to isolate stable dye decolourising strains and the isolated strains were stored at 15°C for further use. The high decolourising bacteria were screened by performing a decolourisation assay with acid red using UV- VIS spectrophotometer (UV-1800, Shimadzu, Japan) at its respective λmax 502 nm. The percentage decolourisation was calculated using the following formula

2.3. Molecular Identification of the Isolate

Genomic DNA from the isolated organism was isolated and its presence was checked by running in agarose gel (0.8%) stained with ethidium bromide. Amplification of 16S rDNA sequence by polymerase chain reaction was done using thermal cycler (Gene Amp ® 2720). 16S r DNA universal primers used for PCR reaction [10]. The reaction mixture of total volume of 30µL consisted of 3 µL of 10X Buffer, 1 µL of 10 mM dNTPs, 1 µL of 16S rDNA primer (5 picomole/µL), 3 U/µL of Taq Polymerase, 5 µL of template DNA (280 ng/ml) and 19µL of sterile distilled water. The PCR reaction was set to initial denaturation of 94°C for 5 minutes, followed by 35 cycles of denaturation at 94°C for one minute, annealing at 55°C for one minute, extension at 72°C for one minute and final extension at 72°C for 10 minutes [11]. The amplified products were stained with 0.5 µg/ml ethidium bromide and loaded on 0.8% agarose gel, and the DNA fragments were separated at 100 V and documented. The amplified product was subjected to cycle sequencing using ABI 3130 XL (Genetic Analyser, Applied Biosystems, USA). The nucleotide sequence analysis of the sequence was performed at BlastN site at NCBI server (http://www.ncbi.nlm.nih.gov/BLAST). The alignment of the sequences was performed by using Clustalw program V 1.82 at European bioinformatics site (http://www.ebi.ac.uk/clustalw). The Phylogenetic tree was constructed by the neighbour joining method using Kimura-2-parameter distances in mega 2.1 software [12].

2.4. Effect of Physico-Chemical Factors on Decolourisation

Mid log phase culture of the isolate was inoculated into LB media supplemented with acid red. The effect of various physicochemical factors (dye concentration, temperature, pH, oxygen) on the decolorization of acid red by the isolate was studied in detail. Decolorization of acid red by the isolate was carried out at various dye concentrations (50, 100, 200, 400 mg/L), temperature (20°C, 40°C, 60°C, 80°C) and pH (2-9). Decolorization experiment was also carried out under aerobic and anaerobic conditions. All decolorization experiments were performed in triplicates. Abiotic controls with bacteria were always included.

2.5. Characterization and Purification of the Intracellular Azoreductase Enzyme

Cells from the mid log phase culture were harvested by centrifugation at 10000 rpm for 10 minutes at 4°C. Pellets were disrupted by sonication at 40% power for 6 minutes. The cell lysate was subjected to fractionated ammonium sulfate precipitation at 40% saturation to remove impurities, followed by 70% saturation in a second step to precipitate the azoreductase. After 24 h, the precipitated protein is centrifuged for 10 minutes at 10000 rpm at 4°C and the pellet was dissolved in equal volume of 50 mM potassium phosphate buffer (pH 7.2). Ammonium sulfate precipitated sample was then desalted by dialysis against phosphate buffer (50 mM, pH 7) overnight under room temperature. 2 mL of the resulting solution was fractionated by anion exchange chromatography using DEAE sephadex column installed in an Amersham Pharmacia Biotech AKTA purifier; pump P-900, monitor pH/C- 900, monitor UV-900, auto sampler Frac-950. Elution buffer (sodium phosphate buffer containing 1 M NaCl was set to a gradient of 100% for 150 minutes. Proteins were eluted at a flow rate of 1.5 mL/minute [13]. The fractionated sample was concentrated using protein purification column. Active fractions were collected and stored as the purified enzyme preparation.

2.6. Assay for Azoreductase Activity

Assays were carried out in cuvettes with a total volume of 1mL using Ultrospec 2100 UV-VIS Spectrophotometer (Shimadzu, Japan, UV-1800). The reaction mixture consists of 400 µL of potassium phosphate buffer with 200 µL of sample and 200 µL of acid red (100 mg/L). The reaction was started by addition of 200 µL of NADH (7 mg/mL) and was monitored photometrically at 502 nm. The linear decrease of absorption was used to calculate the azoreductase activity [14]. One unit of azoreductase can be defined as the amount of enzyme required to decolorize 1 µmol of acid red per minute. The effect of pH on azoreductase activity was determined by incubating the reaction mixture at pH values ranging from 4 to 9. The optimum temperature for enzyme activity was determined by conducting the assay at various temperatures from 20°C to 80°C in 50 mM potassium phosphate buffer (pH 7). The relative activity of azoreductase at each temperature was determined.

2.7. Liquid Chromatography and Mass Spectroscopy Analysis (LCMS Analysis)

About 100 ml of acid red (200 mg/L) containing LB Media treated with the isolate and the purified enzymes was extracted with equal volume of ethyl acetate at various time intervals (0, 24, 48 h).The extract was evaporated in a vacuum evaporator (Buchii R 124, Germany) and used for LC- MS analysis. The powdery residue was then dissolved in acetonitrile (HPLC Grade). LC-MS analysis was performed using Finnigan model Mass Spectrometer (Thermo Electron Corporation, USA) using C-18 column from Waters. The cartridges were conditioned with pure acetonitrile, washed with deionized water (0.1% Formic acid) and the elution took place with 70% acetonitrile, containing 0.1% formic acid. The flow rate was 0.8 ml/ min. The ion trap detector with atmospheric pressure electro-spray ionization (API-ESI) source was used for quantification in negative ionization mode. Operating conditions were dry with temperature of 325°C, Capillary voltage 3500 V, Nebulizer 14 psi, dry gas Helium 5.0 l/min. Ion trap full scan analyses were conducted from m/z 200- 1400 with an upper full time of 300 minutes. The nebulizer gas flow and the curtain gas flow (Nitrogen gas) were set at 10 and 8 psi. The ion spray, orifice and ring voltage were set at +4800, 40, +70 V respectively. Instrumentation control of data acquisitions were performed with data analysis MS (X caliber, USA).

3. Results and Discussion

3.1. Screening and Isolation of Dye Decolorizing Bacteria from Soil

From the serially diluted soil sample, 20 morphologically distinct bacterial colonies with decolourizing zones were isolated. All the 20 bacterial isolates were tested for their dye decolourising efficiency by liquid decolorization assay. Using 500 mg/L of acid red, five Bacterial isolates - A, B, C, D and E showed decolorization percentage of more than 70% at 48 h of incubation. The highest decolorization percentage was showed by E (87.2 ± 0.45). This bacterial isolate was selected and used for further studies.

3.2. Molecular Characterization and Identification of the Isolate

Figure 1. Phylogenetic tree of Pseudomonas spp.

DNA was isolated from the screened bacterial isolate E. 16S rDNA sequence of the colony E was amplified using universal primers. The size of the amplified band was determined to be approximately 1.5 Kb. Each of the amplified DNA was further purified by DNA Elution kit (Bioserve Biotechnologies India Private Limited). The purified bands were subjected to cycle sequencing and BLAST to determine the organism. The isolate E was identified as Pseudomonas by BLAST analysis (www.ncbi.nlm.nih. gov/BLAST/) in the nucleotide sequences database. The phylogenetic tree shown in Figure 2 clearly shows that the isolated strain was closely related to Pseudomonas. Phylogenetic analysis using other methods of tree building also supported this grouping with high bootstrap values.

3.3. Effect of Physico-Chemical Factors on Decolourisation

Table 1. Effect of different physicochemical parameters on decolorization: (LB medium, incubated at various time intervals with different tempertature, pH, oxygen condition)

Maximum decolorization of 90% was observed in pH from 6 to 7 (Table 1). Rate of decolorization decreased at lower pH (4-5) and at higher pH (8-9). No decolorization was obtained at lesser pH 1-2. K. pneumoniae RS-13 was found to completely degrade Methyl Red at pH 6.0-8.0 while Acetobacter liquefaciens S-1 completely degraded Methyl Red at pH 6.5 [15]. E. coli and P. luteola both exhibited best decolorization rate at pH 7.0 with constant decolorization rates up to pH 9.5 [16]. The isolate showed higher decolorization percentage when the medium was incubated at 40-50C. The isolate is capable of decolorizing the dye up to 400mg/L. Lee et al. [17] stated that the increase in the concentration of the dye, the ability of the organism to decolorize decreased. In contrast to this decolorization was not affected by increasing the dye concentration (50 mg-400 mg/L). As indicated in previous studies [18], the chemical structure characteristics (e.g., resonance and inductive effects) and reactivity of dyes strongly determined color removal efficiency of bacterial decolorizers.

3.4. Characterization and Purification of Azoreductase

The enzyme was assayed for extracellular activity. As there was no significant activity observed, intracellular release of the enzyme was performed. After each step of purification the activity was assayed and it was found that the specific activity of the enzyme increased after each step of purification. Enzyme activity in the crude cell extract was found to be 0.0009 U/mg. After ammonium sulfate precipitation and FPLC, the activity increased to 88.49 U/mg. Table 2 gives the activity of azoreductase after each step of purification. The optimum pH found for the activity of azoreductase enzyme was pH 7 with an activity of 0.0003 U/mg. The optimum temperature was found to be 40°C with an activity of 0.00072 U/mg.

Table 2. Purification of azoreductase from Pseudomonas spp.

3.5. Biodegradation of Acid Red by LC-MS

The products of degradation were analyzed and the spectrum of LC-MS of the 0 h, 24 h sample and 48 h sample is shown in the Figure 2. The chromatogram of acid red at 0th hour showed a peak at retention time of 8.01. The mass spectrometric peak at this retention time showed m/z ratio of 513.01 (Figure 2a). In the case of decolourized culture(24 h) of acid red, the mass spectrometric peak at retention time of 5.71, showed a significant m/z ratios of 261(24 h),which corresponds to 1-{3-amino-5- [(aminoxy) sulfonyl] phenyl} ethanol (Figure 2b). A new peak with the retention time of 5.9, m/z ratios of 245.15 was formed at 48 h which corresponds to 7,8-diamino-3 [(aminoxy) sulfonyl] naphthalene-1-ol (data not shown). In case of decolorization with the enzyme (Figure 2c) the mass spectrometric peak at retention time of 6.6 (m/z ratio 245.16) was seen at 3 h of incubation with the enzyme. Figure 2d shows that at 5 h of incubation new peak with the retention time of 5.8 (m/z ratio of 261.11) was formed. These mass values corresponds to 1-{3-amino- 5-[(aminoxy) sulfonyl] phenyl\ethanol and 7, 8-diamino-3 [(aminoxy) sulfonyl] naphthalene-1-ol. In the degradation pathway, hydrogen ions are donated to the azo group of acid red 37 and a hydrazo compound is formed which further reduced to aromatic amines. As shown in Figure 3, the possible mechanism of degradation could be cleavage of azo bond resulting in the formation of degraded products like 7, 8-diamino- 3 [(aminoxy) sulfonyl] naphthalene-1-ol and 1-{3-amino-5-[(aminoxy) sulfonyl] phenyl} ethanol through two step NADH dependant reduction mechanism. The complete catabolic pathway of degraded products has to be studied. However, these amino derivatives/intermediates are reported to be degraded/ transformed under aerobic conditions [19].

Figure 2a. Chromatogram and mass spectra of acid red ai 0 h.

Figure 2b. Chromatogram and mass spectra of acid red at 24 h

Figure 2c. Chromatogram of acid red treated with enzyme (3 h) (b) Mass spectra of acid red after 3 h.

Figure 2d. Chromatogram of acid red treated with enzyme (5 h) (b) Mass spectra of acid red after 5 h

Figure 3. Proposed degradation pathway of acid red

4. Conclusion

The results obtained in this paper were very promising since azoreductase from Pseudomonas spp. could able to degrade the acid red. The partially purified enzyme azoreductase was found to degrade the dye via symmetric cleavage of its azo bond. The culture exhibited good decolorization ability at pH from 6 to 8 and temperature from 30C to 50C. Decolorization efficiency was not affected by the concentration of the dye. However, more studies in order to study the heterologous expression of this enzyme are underway in our laboratory.

References

[1]   | Campos R, Kandelbauer A, Robra KH, Cavaco-Paulo A, Gübitz GM (2001) Indigo degradation with purified laccases from Trametes hirsuta and Sclerotim rolfsii. J Biotechnol 89: 131-139.
[2]   | Zollinger H (1987) Color Chemistry Syntheses: Properties and Application of Organic Dyes and Pigments. (2nd edn), VCH Publications, New York.
[3]   | Devi M, Kaushik BD (2005) Decolorization of textile dyes and dye effluent by Aspergillus Spp. Indian J Microbiol 45: 41-44.
[4]   | Shaul GM, Holdsworth TJ, Dempsey CR, Dostal KA (1991) Fate of water soluble azo dyes in the activated sludge process. Chemosphere 22: 107-119.
[5]   | O’Neill C, Hawkes FR, Hawkes DL, Lourenco ND, Pinheiro HM, et al. (1999) Colour in textile effluents-sources, measurement, discharge consents and simulation: a review. Journal of Chemical Technology and Biotechnology 74: 1009-1018.
[6]   | McMullan G, Meehan C, Conneely A, Kirby N, Robinson T, et al. (2001) Microbial decolourisation and degradation of textile dyes. Appl Microbiol Biotechnol 56: 81-87.
[7]   | Chung K, Stevens Jr SE (1993) Decolourization of azo dyes by environmental microorganisms and helminths. Environ Toxicol Chem 12: 2121-2132.
[8]   | Baldrian P, Gabriel J (2003) Lignocellulose degradation by Pleurotus ostreatus in the presence of cadmium. FEMS Microbiol Lett 220: 235-240.
[9]   | Ponraj M, Gokila K, Zambare V (2011) Bacterial decolorization of textile dye- Orange 3R. International Journal of Advanced Biotechnology and Research 2: 168-177.
[10]   | Grifoni A, Bazzicalupo M, Di Serio C, Fancelli S, Fani R (1995) Identifi cation of Azospirillum strains by restriction fragment length polymorphism of the 16S rDNA and of the histidine operon. FEMS Microbiol Lett 127: 85-91.
[11]   | Banat IM, Nigam P, Singh D, Marchant R (1996) Microbial decolorization of textiledye-containing effl uents: a review. Bioresour Technol 58: 217-227
[12]   | Kumar S, Tamura K, Jakobsen IB, Nei M (2001) MEGA2: molecular evolutionary genetics analysis software. Bioinformatics 17: 1244-1245.
[13]   | Moutaouakkil A, Zeroual Y, Zohra Dzayri F, Talbi M, Lee K, et al. (2003) Purifi cation and partial characterization of azoreductase from Enterobacter agglomerans. Arch Biochem Biophys 413: 139-146.
[14]   | Maier J, Kandelbauer A, Erlacher A, Cavaco-Paulo A, Gübitz GM (2004) A new alkali-thermostable azoreductase from Bacillus sp. strain SF. Appl Environ Microbiol 70: 837-844.
[15]   | Wong PK, Yuen PY (1996) Decolorization and Biodegradation of Methyl Red by K. Pneumoniae RS-13. Water Research 30: 1736-1744.
[16]   | Mali PL, Mahajan MM, Patil DP, Kulkarni MV (2000) Biodecolorization of members of triphenylmethanes and azo groups of dyes. J Sci Ind Res 59: 221-224.
[17]   | Lee YH, Matthews RD, Pavlostathis SG (2005) Biological decolorization of reactive anthraquinone and phthalocyanine dyes under various oxidationreduction conditions. Water Environ Res 78: 156-169.
[18]   | Hsueh CC, Chen BY (2007) Comparative study on reaction selectivity of azo dye decolorization by Pseudomonas luteola. J Hazard Mater 141: 842-849.
[19]   | Tan NCG, Borger A, Slenders P, Svitelskaya A, Lettinga G, et al. (2000) Degradation of azo dye Mordant Yellow 10 in a sequential anaerobic and bioaugmented aerobic bioreactor. Water Sci Technol 42: 337-344.