Dear Label_Name,

Greetings! I hope you are well.

I am writing on behalf of an international publishing house, Science and Education Publishing, USA (http://www.sciepub.com).

Science and Education Publishing (SciEP) is a multidisciplinary open access publisher of Journals covering the fields of Science, Technology and Medicine. All SciEP publications are subject to high-quality peer review, editorial and production processes and are freely available online.

Welcome to the April, 2013 edition of SciEP newsletter, providing monthly summaries of articles on science & education related topics of interest to scientist and professionals. The mission of our journals is to provide an open access forum for publishing new findings on issues pertinent to scientific and academic field. We also invite you to submit original research papers, review articles, short reports, or case studies are considered for publication in our Multidisciplinary Journals.

American Journal of Public Health Research
DOI: 10.12691/ajphr-1-1-3

The Implementation of a Tele-Homecare System with Service Oriented Architecture and HL7 Message Transmission Standard
Ching-Sung Wang

American Journal of Medical and Biological Research
DOI: 10.12691/ajmbr-1-1-2

The Influence of Ethanol on Pyruvate Kinases Activity in Vivo, in Vitro, in Silico
Lelevich Sergey Vladimirovich, Khrustalev Vladislav Victorovich, Barkovsky Eugene Victorovich, Shedogubova Tatyana Aleksandrovna

American Journal of Medical Sciences and Medicine
DOI: 10.12691/ajmsm-1-1-1

Clinical and Histological Features in Wegener Granulomatosis
Li Cavoli Gioacchino, Passantino Rita, Bono Luisa, Tortorici Calogera, Ferrantelli Angelo, Giammarresi Carlo, Rotolo Ugo

American Journal of Infectious Diseases and Microbiology
DOI: 10.12691/ajidm-1-1-2

The Curse of Lymphatic Filariasis: Would the Continual Use of Diethylcarbamazine Eliminate this Scourge in Papua New Guinea?
Anne Lanham, Lillian Mwanri

We have released issues of some journals on February 2013.
American Journal of Public Health Research
American Journal of Medical Sciences and Medicine
American Journal of Medical and Biological Research
American Journal of Pharmacological Sciences
American Journal of Clinical Medicine Research
American Journal of Nursing Research
American Journal of Cancer Prevention
American Journal of Medicine Studies
American Journal of Infectious Diseases and Microbiology
American Journal of Cardiovascular Disease Research
American Journal of Biomedical Research
American Journal of Mechanical Engineering
American Journal of Microbiological Research
Journal of Preventive Medicine
American Journal of Food and Nutrition
American Journal of Hypertension Research
American Journal of Sports Science and Medicine
Journal of Cancer Research and Treatment
American Journal of Zoological Research
Journal of Biomedical Engineering and Technology
American Journal of Microbiological Research
Biomedical Science and Engineering

We are pleased to announce that submissions are now being accepted for peer review for all the journals across all our subject areas in SciEP.

Please submit your manuscript via our online submission system:
http://www.sciepub.com/author/signin

To unsubscribe from our mailing list, please click on the following link: unsubscribe

I am looking forward to hearing from you.

Kind regards,

David Rain
Email:join@sciepub.com
Science and Education Publishing (http://www.sciepub.com)

Synthesis and Physicochemical Study of Methyl Ester from Black and Castor Seed Oil Admixture

Bello Y. Makama*, Olede Wilson, Jimbo H. Claver

Department of Science and Mathematics, American University of Afghanistan, Darulaman Road, Kabul, Afghanistan

Abstract: There is increasing effort in biodiesel production (fatty acid methyl ester) because of the depleting fossil fuel resources as well as similarity in properties when compared to those of diesel fuels. Diesel engines operated on biodiesel have lower emissions of carbon monoxide, unburned hydrocarbons and air toxics than those operated on petroleum-based diesel fuel. Herein we reported the optimization of Black and Castor oils methyl esters production via KOH catalyzed transesterification under various superintended conditions. The optimum yield, temperature, catalyst concentration and reaction time found to be 97%, 60°C, 1.0% (wt of crude black/castor oil) and 45 minutes respectively. A number of the fuel properties (viscosity, specific gravity and flash point) were measured according to standard methods, and were found to conform to international standards.

Keywords: methyl ester, black seed oil, castor oil, physicochemical parameters, statistics

Citation: Bello Y. Makama, Olede Wilson, Jimbo H. Claver, Synthesis and Physicochemical Study of Methyl Ester from Black and Castor Seed Oil Admixture. American Journal of Environmental Protection, 6 (2). 35-38. January 2018. doi:10.12691/env-6-2-1

1. Introduction

Biodiesel is the mono-alkyl ester of vegetable or animal oils. [1,2,3] It has very similar physical properties to diesel fuel and even higher cetane number, which allows it to be used directly as substitute fuel for diesel engines without any modifications or as a blending agent for diesel fuel. Biodiesel is a cleaner burning fuel than diesel and could be a suitable replacement. Since it is produced from renewable and domestically grown feed-stocks, it can reduce the demand for petroleum based fuels and possibly lower the overall cost of diesel fuel. Biodiesel contains no or very little sulfur and thus offers promise to reduce particulate and toxic emissions. Example of such feed-stock is castor seed oil that is obtained from castor plant Ricinus Communis which belongs to the family of euphorbiaceae and black seed oil that is obtained from black seed plant Nigella sativa which belongs to the family of ranunculaceae. Biodiesel contains long-chain fatty acid esters, and is synthesized by transesterification reaction of vegetable oils with short chain alcohols. [4,5,6] It is compatible with conventional diesel fuel and already constitutes a commercial fuel in Europe. [7,8,9,10]

1.1. Experimental Methods

Apparatus and equipment in our experiments include; 400 mL beakers, pipette, pipette filler, 50 mL beakers, test tubes, measuring cylinders, magnetic stirrers, petri-dishes, distillation apparatus, separating funnel, clamp stand, spatula. Heating plates, regulated stirrer, thermometer, chemical balance, stop watch, and oven.

Viscosities were recorded as the product of the calibration constant of the viscometer and the time (seconds) it takes the fluid to travel between the calibrated marks. All results are in mm²/s.

pH was recorded using Exstik pH meter, model PH100.

1.2. Preparation of the Biodiesel

Black seed castor oil admixture (20ml) 1:1 ratio was poured into a 250ml conical flask and was preheated to 60°C. To a stirred solution of methanol (120ml) 6:1 molar ratio was added 0.5 wt % KOH and the solution was stirred vigorously until the KOH had fully dissolved. The resulting solution was poured into the preheated oil admixture and the stirring continues for 60minutes by which time TLC analysis indicated the presence of a new spot. The mixture was transferred into a separating funnel and allowed to settle overnight. Two layers were observed, which were separable, the top layer (biodiesel) was collected, measured. The biodiesel was washed with warm distilled water (10ml) to remove the residual catalyst. The biodiesel recovered was neutralized with 0.1M H₂SO4 (1ml). The black suspensions formed was allowed to settle and decanted gently into a clean beaker. The same experimental protocol was repeated for all the different catalyst concentrations (1.0%, 1.5%, 2.0% and 2.5%) keeping methanol/oil molar ratio at 6:1 and a constant stirring rate of 250rpm. The yield of the biodiesel for each of the experiments was calculated

1.3. Determination of the Specific Gravity

The temperature of the biodiesel recovered was found to be 34°C when the specific gravity was determined. The cleaned, dried and weighed density bottle (Mo) was filled with distilled water to the mark (50cm³) and the weight of the bottle was taken as M1. The same bottle was then emptied and dried. It was then filled with the recovered biodiesel to the mark (50cm³) and the weight of the bottle was taken as M2. The specific gravity of the biodiesel was calculated using

1.4. Determination of the pH

The biodiesel sample was agitated thoroughly. Then, the pH value was determined by using Exstik pH meter, model PH100. The Exstik pH meter has a 20ml flat surface pH electrode inform of a container into which the sample to be tested is poured in. It also has a simulated analog bargraph which indicates whether the tested sample is acidic (< 7.0), neutral (7.0) or basic (> 7.0). It measures pH from 0.0 to 14.0 pH with high resolution and accuracy of 0.01 pH. The biodiesel sample was poured into the 20ml flat surface pH electrode, and then the pH meter was inserted into it. This was observed carefully until a steady point was observed in the simulated analog bargraph. The pH value was noted and recorded.

1.5. Determination of Viscosity

Four Uppelhode viscometers of sized 3C were used in the viscosity measurement. 10 ml of each sample to be analyzed was added through the open end. The viscometer was maintained on its stand and then immersed in a viscometer bath that was already thermostat at 40°C and the viscometer was allowed to stay for 2 hours. By which time, the oil had assumed the temperature of its environment. A pipette filler is then placed at on open end and by closing the other one, oil is sucked up above the upper boundary line. Oil was allowed to flow under gravity to the upper mark where the stop watch was counting. The watch was stopped as the liquid reached the lower boundary and the viscosity was obtained in mm²/s.

1.6. Calorific Value Determination

Oil sample (0.34g) was placed in a cup after which had been properly cleaned. A thread was fixed at the suspender just a little above the cup holder making sure the ends of the thread are immersed in the oil. About 3000 kpa of oxygen was pumped inside the tightly fixed vessel and then wait on the calorimeter to display ‘insert’. The vessel was inserted, lid was closed and after about 15 minutes, the energy content was obtained in mega joules.

1.7. Results and Discussion

Statistical graphical techniques have been used to analyze the recorded data, namely scatter diagram and bar chart plots. [11,12].

Table 1. Transesterification by Varying the Catalyst Concentration

Figure 1. A Graph showing the Effects of Catalyst in the Production of Biodiesel from Castor Seed Oil and Black Seed Oil Admixture

Figure 2. Bar chart showing the Effects of Catalyst in the Production of Biodiesel from Castor Seed Oil and Black Seed Oil Admixture

Table 2. Physicochemical Parameters of the Biodiesel in Comparison with ASTM 6751 and EN 14214 Standards

Table 3. Results for Calorific Value and Viscosity

As it was hoped, the results in the Table 1 and Table 2 showed consistency with standards.

2. Conclusion

It was noted that biodiesel production could be affected by the amount of catalyst concentration used in the reactions. In this preliminary studies, we reported our findings from five different concentrations of KOH; of 0.5w/w %, 1.0w/w %, 1.5w/w %, 2.0w/w % and 2.5w/w %. All the reactions were carried out by keeping other parameters constant. Temperature (60oC), methanol-to-oil molar ratio (6:1), castor seed oil-to-black seed oil molar ratio (1:1), reaction time (60mins), and stirring rate (250rpm) constant. Figure 1 and Figure 2 shows biodiesel yield using different concentration of KOH. The optimum value for the investigated KOH catalyst amount variation in the production of biodiesel was found to be 1.0w/w % KOH with the highest yield of 97.1%. As it was envisioned, the yield increases as the concentration of catalyst increased up to 1.0% but beyond this value, the yield starts to drop. It was envisaged that, increasing the catalyst concentration help to fasten the reaction and give better yield. However, every reaction has its optimum catalyst concentration value. Beyond this value, KOH will participate in reacts with triglyceride to form soap and water reducing the yield.

References

[1]   | Yamada, T., Claver, J. H., Ishii, S., Nishiyama, M., Hong, K., & Sakumura, Y. (2011). Identification of a Molecular System that Regulates Growth Cone Membrane Potential During Growth Cone Guidance . BMC NEUROSCIENCE , 12(Suppl 1), 28.
[2]   | A, S., Fragioudakis, K., Teas, C., Zannikos, F., Stournas, S., & Lois, E. (1999). Effect of Biodiesel Edition to Diesel fuel on Engine Performance and Emmissions . Journal Propul Power, 15(2), 224-231.
[3]   | Claver, J. H., & Craven, M. (2012). Modeling Simulation and Analysis of Noise in Biological Systems. Journal of Control and Application , 781.
[4]   | G, K., Matheaus , A. C., & Ryan, T. W. (2003). Ctane Numbers of Branched and Straight-Chain Fatty Esters Determined in an Ignition Quality Tester, Fuel. 82, 971-975.
[5]   | H, N., Harkey, D., & Medikonduru, V. (1998). Continous Process for the Conversion of Vegitable Oils into Methyl Esters of Fatty Acids. Journal of the American Oil Chemists' Society , 75, 1775-1783.
[6]   | Knothe, G., Van, G., Krahl, J., & J, H. (2005). The biodiesel handbook. AOCS Press, Champagin, III .
[7]   | M, E. J., Gonzalez, J. F., Rodriguez, J. J., & Tejedor, A. (2002). Biodiesel Fuels from Vegetable Oils: Transesterification of Cynara Cardunculus L. Oils with Ethanol, Energy Fuels. 16, 443-450.
[8]   | Makama, B. Y. (2012). Effect of Temperature on the Transesterification of Cod Liver Oil. Research Journal Chemistry Science , 2(7), 82-84.
[9]   | Makama, B. Y. (2011). Transesterification Castor Oil and Palm Oil in Admixture. International Journal of Chemical Science and Technology , 1(4), 116-120.
[10]   | Makama, B. Y., Okoro, L. N., Belaboh, S. V., & Edoye, N. R. (2011). Synthesis, Calorimetric and Viscometric Study of Groundnut Oil Biodiesel and Blends. Research Journal Chemistry Science , 1(3).
[11]   | Mittelbach, M., & Remschmidt, C. (2006). Biodiesel: the comprehensive handbook. M. Mittelbach .
[12]   | P, D. M., Cruz, F., Palomar, J. M., & Lopez, F. J. (2006). An Approach to the Economics of two Vegetable Oil-Based Biofuels in Spain, Renewable Energy. 31, 1231-1237.