Dear Label_Name,

Greetings! I hope you are well.

I am writing on behalf of an international publishing house, Science and Education Publishing, USA (http://www.sciepub.com).

Science and Education Publishing (SciEP) is a multidisciplinary open access publisher of Journals covering the fields of Science, Technology and Medicine. All SciEP publications are subject to high-quality peer review, editorial and production processes and are freely available online.

Welcome to the April, 2013 edition of SciEP newsletter, providing monthly summaries of articles on science & education related topics of interest to scientist and professionals. The mission of our journals is to provide an open access forum for publishing new findings on issues pertinent to scientific and academic field. We also invite you to submit original research papers, review articles, short reports, or case studies are considered for publication in our Multidisciplinary Journals.

American Journal of Public Health Research
DOI: 10.12691/ajphr-1-1-3

The Implementation of a Tele-Homecare System with Service Oriented Architecture and HL7 Message Transmission Standard
Ching-Sung Wang

American Journal of Medical and Biological Research
DOI: 10.12691/ajmbr-1-1-2

The Influence of Ethanol on Pyruvate Kinases Activity in Vivo, in Vitro, in Silico
Lelevich Sergey Vladimirovich, Khrustalev Vladislav Victorovich, Barkovsky Eugene Victorovich, Shedogubova Tatyana Aleksandrovna

American Journal of Medical Sciences and Medicine
DOI: 10.12691/ajmsm-1-1-1

Clinical and Histological Features in Wegener Granulomatosis
Li Cavoli Gioacchino, Passantino Rita, Bono Luisa, Tortorici Calogera, Ferrantelli Angelo, Giammarresi Carlo, Rotolo Ugo

American Journal of Infectious Diseases and Microbiology
DOI: 10.12691/ajidm-1-1-2

The Curse of Lymphatic Filariasis: Would the Continual Use of Diethylcarbamazine Eliminate this Scourge in Papua New Guinea?
Anne Lanham, Lillian Mwanri

We have released issues of some journals on February 2013.
American Journal of Public Health Research
American Journal of Medical Sciences and Medicine
American Journal of Medical and Biological Research
American Journal of Pharmacological Sciences
American Journal of Clinical Medicine Research
American Journal of Nursing Research
American Journal of Cancer Prevention
American Journal of Medicine Studies
American Journal of Infectious Diseases and Microbiology
American Journal of Cardiovascular Disease Research
American Journal of Biomedical Research
American Journal of Mechanical Engineering
American Journal of Microbiological Research
Journal of Preventive Medicine
American Journal of Food and Nutrition
American Journal of Hypertension Research
American Journal of Sports Science and Medicine
Journal of Cancer Research and Treatment
American Journal of Zoological Research
Journal of Biomedical Engineering and Technology
American Journal of Microbiological Research
Biomedical Science and Engineering

We are pleased to announce that submissions are now being accepted for peer review for all the journals across all our subject areas in SciEP.

Please submit your manuscript via our online submission system:
http://www.sciepub.com/author/signin

To unsubscribe from our mailing list, please click on the following link: unsubscribe

I am looking forward to hearing from you.

Kind regards,

David Rain
Email:join@sciepub.com
Science and Education Publishing (http://www.sciepub.com)

Tuning and Exploitation of the Surface Plasmon Resonance on Gold/Cadmium Sulfide Nanoshell for Performanance Enhancement in Photocatalytic

A. Sambou*, A. Dioum, D. Diop, M. Thiam, A. Talla

Laboratory of Physics Solid and Sciences of Materials, Cheikh Anta Diop University, Dakar, Senegal

Abstract: Core-shell nanoparticles based on Au or Ag nanoshell core and cadmium sulfide semiconductor shell with differents size have been simulated using Mie and Drude approach. The results show that gold nanosphere coated by cadmium sulphide results has a maximum wavelength at 530 nm. This plasmon peak correspond to a ratio equal of 1.66. The optimised nanoshell allow light absorption in the visible region before cadmium sulfide coating. Thus, theses materials Au/CdS especially are good candidates for the design of functional nanocomposites used for photocatalytic application due mainly to its good light transparency.

Keywords: core-shell, gold, silver, cadmium sulfide, mie theory, nanoparticles

Received June 12, 2021; Revised July 19, 2021; Accepted August 02, 2021

Citation: A. Sambou, A. Dioum, D. Diop, M. Thiam, A. Talla, Tuning and Exploitation of the Surface Plasmon Resonance on Gold/Cadmium Sulfide Nanoshell for Performanance Enhancement in Photocatalytic. American Journal of Materials Science and Engineering, 9 (1). 15-20. January 2021. doi:10.12691/ajmse-9-1-3

1. Introduction

Solar energy is free and almost unlimited, thus its exploitation obviously raises great hopes. The exploitation of solar energy, free and almost unlimited, obviously raises great hopes. The photovoltaic cell a priori is one of the privileged means to directly convert the solar rays into electricity. Among the materials used for this conversion is cadmium sulfide (CdS), which has been in great demand due to its good physicochemical properties. Indeed, the CdS has made it possible to achieve relatively high photovoltaic conversion efficiencies using easily implemented techniques such as the chemical bath deposition (CBD) technique [1] or by evaporating chemically synthesized [2].

CdS is a II-VI compound, n type semiconductor with energy gap of 2.45 eV. It is used in photovoltaic, photonic and optoelectronics. In detail, cadmium sulfide thin film have received considerable attention due to their applications in the fabrication of photoconductors [3], space charge limited diodes [4], photovoltaic devices [5,6] and transitors [7].

Metal-semiconductor hybrid nanoparticles are promising candidates for applications in solar energy conversion [8], photocatalysis [9,10] and electronic devices [11]. The nanoscopic dimensions of their components, result in size and shape-dependent electronic and optical properties. These mainly result from quantum confinement in the semiconducting part (“exciton”) and the dielectric confinement (“surface plasmon”) in the metal part, leading to a very high polarizability at the plasmon frequency. Surface plasmons are collective excitations of the electrons at the interface between a conductor and an insulator and are described by evanescent electromagnetic waves that are not necessarily located at the interface. Surface plasmon appear in a number of different phenomena, including the optical response of materials at different scales, to Casimir and van der waals forces between macroscopic bodies [12]. Plasmonic nanoparticles are appreciable for scientific research because of their interesting applications in the field of photonics, electronics, optical sensing, imaging [13,14,15]. Surface plasmon resonance is a function of size, shape, inter-particle distance, surface coverage and surrounding medium [12,16].

Plasmonic nanoparticles compensate high losses in solar cells, occurring due to partial absorption of the solar spectrum and thermalization losses of photons. These losses are the primary challenge that has generally been addressed to overcome the limitations of photovoltaic efficiency. The incorporation of these nanoparticles enhances the light scattering in the photoactive absorb layer, which improves the overall performance of solar cells.

In this article, we use gold and silver nanoparticles for solar cell applications because their localized surface plasmon resonance have been performed and are localized in the visible range. For gold nanoparticles resonance plasmon is at 515nm [17,18] and at 400 nm for silver nanoparticles [19,20].

We compare theoretical calculations results based on extinction measurements of hybrid Au/CdS and Ag/CdS nanoparticles. Thus, the optical properties of CdS-Au and CdS-Ag hybrid particles arise from a complex interplay of the components. The rapid electron transfer from the semiconductor to the metal leads to quenching of the fluorescence from the semiconductor part [21,22]. The optical properties of these nanostructures, for example, often exhibit interesting deviations from either their individual components of from a physical mixtures of the two components. These optical effects include a shift in the plasmon resonance of noble metal nanocrystals when combined or coated with other materials or changes in the photoluminescence intensity of semiconductor nanocrystals which can be attributed to the overlap for the electronic structures of the different components [23].

In this article, we simulated the optical properties of Au/CdS and Ag/CdS core-shell nanospheres using the solution of Maxwell’s equations for spherical particles using Mie-Gans theory combinated with Drude model. We calculate the optical cross section area, properties such as the extinction, absorption and scattering cross sectional area for gold/cadmium sulphide (Au/CdS) and silver/cadmium sulphide (Ag/CdS) using Matlab sofware.

2. Method and Material

At this point, it is usual to define absorption and scattering cross-sections of the sphere core/shell by dividing and A definition of cross-sections as characteristic quantities only for the scattering particle is a serious unsolved problem. Nevertheless, we define cross-sections and as [24].

[picture] | (1)

[picture] | (2)

So the absorption and scattering cross-sections are both functions of and And the total extinction cross-section as

[picture] | (3)

Where, k and α are defined as:

[picture] | (4)

[picture] | (5)

The optical constants such as real part and imaginary part of the complex dielectric function, the refractive index n and extinction coefficient k are the determining parameters for electronic polarizability of the nanoparticles. Thus, there are two sets of quantities that are often used to describe optical properties: the real and imaginary parts of the complex refractive index and the real and imaginary parts of the complex dielectric function (or relative permitivity) . These two sets of quantities are not independent. Eithier may be thought of as describing the intrinsic optical properties of matter. The relations between the two are [25]

[picture] | (6)

The drude model dielectric function is

[picture] | (7)

Where is the angle frequency of incident light, is the damping constant which is related to electron scattering processes, is the plasma frequency.

Table 1. Values of the plasma frequency ωp, the damping constant γ and ε∞

The simulation was done using the optical values (n, k) suggested by Hossam ElAnzeery and al [29] for CdS.

3. Results and Discussion

3.1. Absorption and Transmittance of CdS Nanoparticles

For the purposes of illustration we will use the model developed in our previous article [30] to calculate the optical properties of the gold and cadmium sulphide. The particles are considered to be spheres of radius r=25 nm distributed on the surface of the substrate. For the substrate we take the optical values (n, k) and considered the surrounding medium as air. The calculated absorption (e.g. Figure 1.a, b) and transmittance (e.g. Figure 1.c) of the gold and cadmium sulfide nanoparticles, depending on the wavelength, varies between 300 to 800 nm.

It is known that semiconductor nanoparticles have unique size-dependent chemical and physical properties [31,32]. As shown in these articles, the size of semiconductor particles decreases to the nanoscale, the band gap of the semiconductor increases, causing a blue shift in the UV-Vis absorption spectra. Our study first shows a decreasing evolution of CdS absorption with increasing wavelength. This absorption varies from 74.99% to 8.66% for wavelengths from 300 to 800 nm, respectively. The experimental work of Ramamurthy et al. [33], showed exactly the same evolution of CdS nanoparticles absorption. This allows us to validate our study code. Figure 1.a indicates, CdS materials exhibit an absorption peak of about 482 nm. The spectrum of the gold capped CdS nanoparticles are shown in Figure 1.b. As illustrated in Figure 1.b, the CdS/Au nanoparticles exhibited an absorption peak at 485nm (let an offset of 3 nm).

Figure 1. Absorption spectrum of Au, CdS (a), CdS/Au (b) and transmittance spectrum of CdS (c)

In the absorbance spectra of the gold nanoparticles, there were two obvious turning points in the temporal evolution of the absorption spectrum during the simulation of gold nanoparticles. Absorbance properties of metal nanoparticles is dependent on shape and size of metal nanoparticles, which results in a strong absorbance band in the visible region (300 nm-500 nm) more than 60% and after 500 nm, there is a decreasing trend to less than 10% in the range 500 nm to 800 nm. Figure 1.b, shows the obtained results after deposited gold nanoparticle on the CdS. There is a slight increase in the 300-500 nm region and a decrease in the 500-800 nm range. In Figure 1.c, the transmission spectrum of a CdS nanoparticle is presented. Contrary to the absorption phenomenon, an opposite evolution of transmittance is observed for CdS. The transmission in the high-energy region extends up to 300 nm. CdS nanoparticles presented a good optical transmission. According to the Figure 1.c, when the radius CdS increase (25-40 nm), the transmission rate decrease.

3.2. Optical Properties: Extinction Cross Section

The optical properties of gold, silver and cadmium sulphide nanospheres are highly dependent on the nanospheres radius. The extinction cross section area diagrams of Au, Ag and CdS nanospheres with radius of 15 nm and immersed in a medium with a refraction index of 1.333 (water).

All spectra have a peak resonance at visible spectrum, caused by the oscillations of the nanosphere electrons on the surface. The simulation results are given in Figure 2 in comparison with the experimental result. As the measured spectra are for a dilute solution of nanoparticles dissolved in water with a well defined size and shape, we model the nanoparticles as isolated hybrid particles that are not interacting with each other. For gold, silver and cadmium sulphide we obtained following plasmon resonances. For gold nanoparticles, the plasmon resonance peak is loacated around 515 nm, and at 410 nm for silver nanoparticle. For cadmium sulphide, the simulation obtained a small plamon peak at around 475 nm.

In addition, the surface plasmon resonance peak positions of the simulated spectra show an excellent agreement with those values corresponding to experimentally measured spectra. These reference works are in [17,18] for gold, [19,20] for silver and [34] for cadmium sulphide nanoparticles.

Figure 2. Extincton cross section of gold, silver and cadmium sulphide

3.3. Optical Properties of Core/Shell Nanoparticles

Core-shell nanoparticles are a class of nanostructured materials that have recently received increased attention owing to their interesting properties and broad range of applications in catalysis, biology, materials chemistry and sensors.

3.3.1. Effect of the Core Material and Shell Size

In order to examine the influence of CdS shell size on extinction spectrum of composite nanoparticle, R1 core size is fixed to 15 nm. The extinction spectra with different shell sizes are shown in Figure 3 and the results of the simulations are summarized in Table 2. The spectra of conventional core/shell structure of Au/CdS and Ag/CdS are also presented for comparison. As illustrated in Figure 2, the extinction efficiency of Ag/CdS composite nanoparticle is selectively improved in the visible region as CdS shell size varies. This is attributed to the excitation of localization surface plasmon resonance on silver surface at corresponding wavelength. As shown in the Table 2, there is an evolution of plasmon resonance towards the long wavelength of 410 nm corresponding to silver metal alone at 470 nm after the addition of a CdS layer of size 30 nm. It can clearly be observed in Figure 3 that these spectra follow the same trend with CdS size.

Figure 3. Relationship between extinction properties and shell thickness of metal/CdS: Au/CdS (a) and Ag/CdS (b)

In the case of gold nanoshells, when the core radius is fixed to 15 nm, as shown in Figure 3.a, the extinction spectra of nanoparticles with different CdS layer thicknesses (00, 15, 20, 25, 30, 35 nm) show on evolution are quite different from that of nanoshells with silver as core. After a maximum for Ag/CdS (15/15), corresponding to a resonace plasmon of 525 nm, the resonance wavelength is blue shifted from 525 to 475 nm as the shell radius varies from 15 to 35 nm. Of these two materials, simulations results indicate well that the resonance of silver nanoparticle is boosted up as the ratio of intermediate layer thichness to core radius decreases (as shown Figure 3.b). Considering the evolution of the extinction spectra shown in Figure 3, it is possible to propose the following mechanism for the formation and growth of the Au/CdS and Ag/CdS nanoparticles for visible application such as photocatalysis or photovoltaics. This is how, our results reveal that of localized surface plasmon resonance should be excited in wavelength range below 525 nm and 475 nm for Au/CdS and Ag/CdS, respectively. A very important aspect to consider in the reasons of the evolution towards the CdS peak is the value of the dielectric constant of the envelope (i.e. =7.11 [35] which is much higher than that of gold (i.e. less than 4) and silver (less than 0.25) metal [36].

Table 2. Localized surface plasmon resonance

3.3.2. Core Size Effect on Surface Plasmon Band

The simulation extinction cross section spectra is plotted in Figure 4, for various core thickness ranging from 15 nm to 40 nm. During this exercise, shell thickness is kept constant and equal to 15 nm. These particles are immersed in surrounding medium of refraction index n=1.333. As shown in Figure 4, spectral location of surface plasmon resonance is gradually red-shifted with respect to corresponding rise in the value of the core size. The simulation characterization of core/shell particles show that with increasing core thichness or otherwise by increasing the ratio of core size to shell size the intensity of the resonance band increases and sifted toward the higher wavelenth region

Quantitatively, surface plasmon resonance is locatized at 525 nm, 527 nm, 530 nm, 530 nm, 530 nm and 530 nm for core radius equal to 15 nm, 20 nm, 25 nm, 30 nm, 35 nm and 40 nm, respectively. As it is shown in Figure 4 and Table 2, it can be said that the maximum resonance band is reach when the gold thichness is 25 nm and cadmium sulfide thickness is 15 nm or a ratio of 1.66. We note that, after reaching a wavelength of 530 nm, the resoances band are no longer sensitive to the change into the ratio core/shell but the plasmon band increased in intensity.

Figure 4. Extinction cross section for Au/CdS nanospheres at varying radius core at shell thickness of 15 nm

4. Conclusion

In this paper, we demonstrated the capabilities of the Mie theory and quasi-static approximation to calculate the optical response of the metallic nanoshell. We have implemented a simple method that allows us to optimize A/CdS and Ag/CdS nanoshells. The method presented in this study results in the formation of Au and Ag surrounded by CdS semiconductors with differents thicknesses. The results show clearly that wavelength of plasmon resonance of gold and silver / cadmium sulfide nanospheres are highly dependent on the core/shell ratio. Thus, three parameters are fundamental to correctly identify the plasmon resonance band: surrounding medium, shell thickness and core size. The quantitative information deduced from the simulation analysis shows, the maximum peak resonance response of Au/CdS nanoshell is observed in the visible region at 530 nm with a ratio Au/CdS=1.66.

References

[1]   | Y. A. Salazar, R. Patino, J. L. Pena, W. Cauich, and A. I. Oliva, “Physical Properties of CdS/ITO Thin Films Growth by CBD Technique with Substrate Oscillating Agitation”, Brazilian Journal of Physics, vol. 36, no.3B, 1058-1061, 2006.
[2]   | R. Sathyamoorthy , P. Sudhagar, S. Chandramohan, U Pal, “Size Effect on the Physical Properties of CdS Thin Films Prepared by Integrated Physical-Chemical Approach”, J Nanosci Nanotechnol, 8(12): 6481-6, 2008.
[3]   | A. M. Andrews and C.R. Haden, “Electroluminescence in vacuum evaporated cadmium sulfide” Proc. IEEE 57, 99, 1969.
[4]   | J. Dresner and F. V. Shallcross, “Rectification and space-charge-limited currents in CdS films”. Solid State Electron, 5, 205, 1962.
[5]   | B. Goldstein and L. Pensak, “High‐Voltage Photovoltaic Effect” J. Appl. Phys., 30, 155, 1959.
[6]   | F. A. Shirland, “The history, design, fabrication and performance of CdS thin film solar cells” Advan. Energy Conversion, 6, 201, 1966.
[7]   | L. R. Shiozawa, F. Augustine, G.A. Sullivan, J. M. Smith and W.R. Cole, Aerospace Res. Lab. Contract Report ARL69-0155 (USAF Wright-Patterson Air Force Base, Ohio), 1969.
[8]   | L. Etgar, “Semiconductor Nanocrystals as Light Harvesters in Solar Cells”, Materials, 6, 445-459, 2013.
[9]   | V. Subramanian, E. E. Wolf, P. V. Kamat, “Catalysis with TiO2/Gold Nanocomposites. Effect of Metal Particle Size on the Fermi Level Equilibration” J. Am. Chem. Soc., 126, 4943-4950, 2004.
[10]   | Y. Shemesh, J. E. Macdonald, G. Menagen, U. Banin, “Synthesis and Photocatalytic Properties of a Family of CdS-PdX Hybrid Nanoparticles” Ang. Chem., Int., 50, 1185-1189, 2011.
[11]   | M. T. Sheldon, P. E. Trudeau, T. Mokari, L. W. Wang, A. P. Alivisatos, “Enhanced Semiconductor Nanocrystal Conductance via Solution Grown Contacts” Nano Lett., 9, 3676-3682, 2009.
[12]   | C. Noguez, “Surface Plasmons on Metal Nanoparticles: The Influence of Shape and Physical Environment”, Phys. Chem., 111, 3806-3819, 2007.
[13]   | E. Hutter and J. H. Fendler, “Exploitation of Localized Surface Plasmon Resonance” Advanced Materials, 16, 1685-1706, 2004.
[14]   | B. Kang, M. M. Afifi, L. A. Austin and M. A. El-Sayed, “Exploiting the Nanoparticle Plasmon Effect: Observing Drug Delivery Dynamics in Single Cells via Raman/fluorescence Imaging Spectroscopy” ACS nano, 7, 7420-7427, 2013.
[15]   | B. Gjonaj, J. Aulbach, P. Johnson, A. Mosk, L. Kuipers and A. Lagendijk, “Focusing and Scanning Microscopy with Propagating Surface Plasmons” Physical review letters, 110, 266804, 2013.
[16]   | I. O. Sosa, C. Noguez and R. G. Barrera, “Optical Properties of Metal Nanoparticles with Arbitrary Shapes” The Journal of Physical Chemistry B, 107, 6269-6275, 2003.
[17]   | N. G. Khlebtsov, L. A. Dykman, “Optical properties and biomedical applications of plasmonic nanoparticles” Journal of Quantitative Spectroscopy & Radiative Transfer, 111, 1-35, 2010.
[18]   | A. Sambou, B. D. Ngom, L. Gomis, A. C. Beye, “Turnability of the Plasmonic Response of the Gold Nanoparticles in Infrared Region”, American Journal of Nanomaterials, Vol. 4, No. 3, 63-69, 2016.
[19]   | C. J. Lee, M.R. Karim, T. Vasudevan, H. J. Kim, K. Raushan, M. J. Jung, D. Y. Kim and M. S. Lee, “A Comparison Method of Silver Nanoparticles Prepared by the Gamma Irradiation and in situ Reduction Methods”, Korean Chem. Soc., 31, 1993, 2010.
[20]   | R. Liu, W. Teo, S. Tan, H. Feng, P. Padmanabhan and B. Xing,”Metallic nanoparticles bioassay for Enterobacter cloacae P99 b-lactamase activity and inhibitor screening”, Analyst, 135, 1031, 2010.
[21]   | T. Mokari, E. Rothenberg, I. Popov, R. Costi, U. Banin, “Selective Growth of Metal Tips onto Semiconductor Quantum Rods and Tetrapods” Science, 304, 1787-1790, 2004.
[22]   | A. E. Saunders, I. Popov, U. Banin, “Synthesis of Hybrid CdSAu Colloidal Nanostructures”, J. Phys. Chem. B, 110, 25421-25429, 2006.
[23]   | D. Steiner, T. Mokari, U. Banin and O. Millo, “Electronic Structure of Metal-Semiconductor Nanojunctions in Gold CdSe Nanodumbbells”, Phys. ReV. Lett., 95, 056805, 2005.
[24]   | A. Ishimaru, “Wave Propagation and Scattering in Random Media”, Academic Press, New York, 1978.
[25]   | M. A. Ordal, L. L. Long, R. J. Bell, S. E. Bell, R. R. Bell, R. W. Alexander, Jr., and C. A. Ward, “ Optical properties of the metals Al, Co, Cu, Au, Fe, Pb, Ni, Pd, Pt, Ag, Ti, and W in the infrared and far infrared”, APPLIED OPTICS, Vol. 22, No. 7, 1099-1120, 1983.
[26]   | A. D. Rakic, A. B. Djurisic, J. M. Elazar, M. L. Majewski, “Optical properties of metallic films for vertical-cavity optoelectronic devices”, Appl. Opt. 37, 5271-5283, 1998.
[27]   | P. B. Johnson, R.W. Christy, “Optical constants of the noble metals”, Phys. Rev., B:Condens. Matter 6, 4370-4379, 1972.
[28]   | D. Rioux, S. Vallières, S. Besner, P. Munoz, E. Mazur and M. Meunier, “An Analytic Model for the Dielectric Function of Au, Ag, and their Alloys” Adv.Optical Mater., 2, 176-182, 2014.
[29]   | H. ElAnzeery, O. El Daif, M. Buffière, S. Oueslati, K. B. Messaoud, D. Agten, G. Brammertz, R. Guindi, B. Kniknie, M. Meuris and J. Poortmans, “Refractive index extraction and thickness optimization of Cu₂ZnSnSe₄ thin film solar cells”, physica status solidi (a) 212 (9), 1984-1990, 2015.
[30]   | A. Sambou, P. D. Bassene, M. Thiam, L. Gomis, A. A. Diouf, S. Diallo, Kh. Talla And A. C. Beye, “Simulated optical properties of gold/silver alloy nanoshell with different composition”, Int. J. Adv. Res. 6(10), 64-73, 2018.
[31]   | R. S. Kane, R. E. Cohen, R. Silbey, “Semiconductor Nanocluster Growth within Polymer Films”, Langmuir 15 (1), 39-43, 1999.
[32]   | L. Qi, H. Colfen, M. Antonietti, “Synthesis and Characterization of CdS Nanoparticles Stabilized by Double-Hydrophilic Block Copolymers”, Nano Lett. 1 (2), 61-65, 2001.
[33]   | N. Ramamurthy, M. R. Kumar and G. Murugadoss, “Synthesis and study of optical properties of CdS nanoparticles using effective surfactants”, Nanoscience and Nanotechnology: An International Journal, 1 (3): 12-16, 2011.
[34]   | E. Shaviv, O. Schubert, M. Alves-Santos, G. Goldoni, R. Di Felice, F. Vallee, N. D. Fatti, U. Banin and C. Sonnichsen, “Absorption Properties of Metal_Semiconductor Hybrid Nanoparticles”, American Chemical Society, VOL. 5, NO. 6, 4712-4719, 2011.
[35]   | V. Kumar, A. K. Shrivastava, A. Sinha, V. Jha, “Dielectric properties of different materials”, Indian Journal of Pure & Applied Physics, Vol. 51, pp. 49-54, 2013.
[36]   | Pascal Mignot le 14 mars 2003, Indices de réfraction et d'extinction pour les métaux.