Dear Label_Name,

Greetings! I hope you are well.

I am writing on behalf of an international publishing house, Science and Education Publishing, USA (http://www.sciepub.com).

Science and Education Publishing (SciEP) is a multidisciplinary open access publisher of Journals covering the fields of Science, Technology and Medicine. All SciEP publications are subject to high-quality peer review, editorial and production processes and are freely available online.

Welcome to the April, 2013 edition of SciEP newsletter, providing monthly summaries of articles on science & education related topics of interest to scientist and professionals. The mission of our journals is to provide an open access forum for publishing new findings on issues pertinent to scientific and academic field. We also invite you to submit original research papers, review articles, short reports, or case studies are considered for publication in our Multidisciplinary Journals.

American Journal of Public Health Research
DOI: 10.12691/ajphr-1-1-3

The Implementation of a Tele-Homecare System with Service Oriented Architecture and HL7 Message Transmission Standard
Ching-Sung Wang

American Journal of Medical and Biological Research
DOI: 10.12691/ajmbr-1-1-2

The Influence of Ethanol on Pyruvate Kinases Activity in Vivo, in Vitro, in Silico
Lelevich Sergey Vladimirovich, Khrustalev Vladislav Victorovich, Barkovsky Eugene Victorovich, Shedogubova Tatyana Aleksandrovna

American Journal of Medical Sciences and Medicine
DOI: 10.12691/ajmsm-1-1-1

Clinical and Histological Features in Wegener Granulomatosis
Li Cavoli Gioacchino, Passantino Rita, Bono Luisa, Tortorici Calogera, Ferrantelli Angelo, Giammarresi Carlo, Rotolo Ugo

American Journal of Infectious Diseases and Microbiology
DOI: 10.12691/ajidm-1-1-2

The Curse of Lymphatic Filariasis: Would the Continual Use of Diethylcarbamazine Eliminate this Scourge in Papua New Guinea?
Anne Lanham, Lillian Mwanri

We have released issues of some journals on February 2013.
American Journal of Public Health Research
American Journal of Medical Sciences and Medicine
American Journal of Medical and Biological Research
American Journal of Pharmacological Sciences
American Journal of Clinical Medicine Research
American Journal of Nursing Research
American Journal of Cancer Prevention
American Journal of Medicine Studies
American Journal of Infectious Diseases and Microbiology
American Journal of Cardiovascular Disease Research
American Journal of Biomedical Research
American Journal of Mechanical Engineering
American Journal of Microbiological Research
Journal of Preventive Medicine
American Journal of Food and Nutrition
American Journal of Hypertension Research
American Journal of Sports Science and Medicine
Journal of Cancer Research and Treatment
American Journal of Zoological Research
Journal of Biomedical Engineering and Technology
American Journal of Microbiological Research
Biomedical Science and Engineering

We are pleased to announce that submissions are now being accepted for peer review for all the journals across all our subject areas in SciEP.

Please submit your manuscript via our online submission system:
http://www.sciepub.com/author/signin

To unsubscribe from our mailing list, please click on the following link: unsubscribe

I am looking forward to hearing from you.

Kind regards,

David Rain
Email:join@sciepub.com
Science and Education Publishing (http://www.sciepub.com)

Frequency Modulation Study of a Monofacial Solar Cells Based on Copper Indium and Gallium Diselenide (CIGS) under Monochromatic Illumination: Influence of Incidence Angle and Gallium Doping

Gerome SAMBOU*, Alain Kassine EHEMBA, Mouhamadou Mamour SOCE, Amadou DIAO, Moustapha DIENG

Laboratory of Semiconductors and Solar Energy, Physics Department, Faculty of Science and Technology, - University Cheikh Anta Diop - Dakar - SENEGAL

Abstract: In this article a frequency modulation study on a CIGS-based solar cells under the influence of incidence angle and gallium doping is made. The resolution of the minority carrier continuity equation allowed us to determine the density of minority carriers, the photocurrent density and photovoltage expressions according to modulation frequency, wavelength, incidence angle and gallium doping. Incidence angle and Gallium doping tend to decrease the performance of the solar cell by degrading its intrinsic properties.

Keywords: CIGS, frequency modulation, wavelength, incidence angle, gallium doping, photocurrent, photovoltage

Citation: Gerome SAMBOU, Alain Kassine EHEMBA, Mouhamadou Mamour SOCE, Amadou DIAO, Moustapha DIENG, Frequency Modulation Study of a Monofacial Solar Cells Based on Copper Indium and Gallium Diselenide (CIGS) under Monochromatic Illumination: Influence of Incidence Angle and Gallium Doping. American Journal of Materials Science and Engineering, 6 (1). 7-11. January 2018. doi:10.12691/ajmse-6-1-2

1. Introduction

Solar cells based on Cu(In,Ga)Se2 (CIGS) have reached conversion efficiencies above 21.7% [1] in the laboratory for small areas of a few square centimetre (). Moreover, their efficiency can be improved according to the layer synthesis method. CIGS is a direct gap semiconductor material. The CIGS gap varies according to X (the rate of gallium atoms replacing indium atoms in the structure) between the values of pure CIS and pure CGS, according to the empirical law [2]:

Where, [3,4]

To link the characteristics of a thin-film solar cell with the properties of the CIGS material, theoretical study models have been made. Electrical parameters are determined in static mode [5], but also in dynamic mode [6] under monochromatic illumination. Thus in this work we propose a one-dimensional theoretical study in frequency modulation under monochromatic illumination on a CIGS-based monofacial solar cells model. The effects of angle of incidence and gallium doping on minority carrier density, photocurrent density and photovoltage are highlighted.

2. Theoretical Study

We consider a CIGS-based solar cells whose simplified structure is shown in Figure 1.

Figure 1. Simplified schema of a CIGS-based solar cells with one dimensional dimensions

In this study, we will neglect the contribution of the emitter by focusing only on the bottom-up contribution.

Under the effect of frequency-modulated monochromatic optical excitation, minority charge (electrons) carriers are generated in the absorbing layer of the solar cells. The continuity equation of the minority carriers in the x-axis base in frequency dynamic regime is of the form: [7,8]:

[picture] | (1)

With the complex diffusion coefficient of minority carriers; the density of minority carriers; the generation rate of minority carriers [9,10] and the average life of minority carriers.

[picture] | (2)

[picture] | (3)

Where and are the spatial component and is the temporal component.

For illumination from the front face of the solar cell and depending on the angle of incidence, the spatial component of the generation rate is:

[picture] | (4)

Where is the absorption coefficient at the wavelength λ; R(λ) is the reflection coefficient of the material, the incident photon flux, and the incidence angle.

By replacing equations (2), (3) and (4) in equation (1) we get:

[picture] | (5)

with

[picture] | (6)

intrinsic diffusion length

the complex diffusion length

The general solution of the preceding equation (6) is given by the relation (7).

[picture] | (7)

The constants A and B are determined from the following boundary conditions [13]:

• At junction x=0:

[picture] | (8)

• on the rear face of the base (x=H):

[picture] | (9)

SF and SB denote the recombination speeds of the minority load carriers at the junction and rear face of the base respectively.

The expression of minority carriers density is expressed as a function of the CIGS absorption coefficient. This coefficient depends on gallium doping and is given by:

with A () a constant [14].

Beyond the expressions of minority carriers density, photocurrent density and photovoltage are determined according to the angle of incidence of gallium doping rate, frequency and wavelength.

3. Results and Discussions

3.1. Density Profile of Minority Carriers

Figure 2 shows the profile of the minority carrier density module according to the base depth for different angles of incidence:

Figure 2. Module of minority carrier density as a function of base depth for different incidence angle values θ

This Figure 2 shows that for small depth values in the base the minority carrier density module increases to a maximum corresponding to a base depth x₀. Then for values of x higher than x₀, the module of minority carrier density decreases. In this way, in the base of the photopile there are two zones delimited by x₀:

the area where

In this area, the density gradient of minority carriers in the base of the photopile is positive: charge carriers located in this area can cross the junction and participate in the photocurrent. This area is considered to be an extension of depletion zone.

the area where

In this area of the base, the module of minority carriers density decreases: the gradient is negative. Minority carriers are blocked and we obey volume and surface recombinations. These recombinations are sometimes due to the presence of deficiencies, structural defects which are positively charged, and which are mainly VSe selenium deficiencies. [15]

In addition, Figure 2 also shows that the minority carriers density module decreases with increasing incidence angle. Indeed, the increase in the angle of incidence relativizes the sun's inclination according to the normal at the front face of the cell. Thus, more than one increases the angle of incidence, the greater thickness of the atmosphere is traversed by the sun and a part of radiation is absorbed. We remark a loss of energy, therefore a decrease in the density of minority carriers.

Figure 3. Module of minority carrier density as a function of the base depth for different doping values X

In Figure 3 the four curves have the same profile. We observe the two zones (area where and the one where ) explained in the previous figure. In addition, the increase in gallium doping increases the energy of the CIGS gap and therefore the space load zone x₀. Then there is a decrease in the density of minority carriers when gallium doping is increased. We observe a distance x1 of about above which the low-doping gallium curves are below. Thus, low doping levels favour recombinations in the depth of the base.

From the expression of minority carrier’s density, we can deduce the photocurrent density and the photovoltage respectively.

3.2. Photocurrent density profile

By applying the FICK law, at the junction of the solar cells, we obtain the density of photocurrent given by:

[picture] | (10)

q is the elementary charge of the electron.

There combinations of these electron-hole pairs in the depletion zone are among the phenomena that fundamentally limit the performance of photovoltaic devices. The speed of recombination at the junction partially relativizes the effects of these recombination phenomena.

The module profile of the photocurrent density as a function of the recombination velocity at the junction for different angle of incidence is shown in Figure 4.

Figure 4. Photocurrent density module as a function of recombination velocity at junction for different incidence angle values

This Figure 4 shows that for large values of the recombinant junction velocity (SF) of minority carriers, the photocurrent density module tends towards a limit which is the density of the short-circuit current Jcc. For low values (SF) of the recombination velocity at the junction, there is virtually no electron flow through the junction. We're at the open circuit operating point.

In addition, we note that the density of the Jcc short-circuit current decreases when the angle of incidence is increased θ. Indeed, with the inclination of the sun (the sun is no longer at Zenith), the level of illumination decreases. This leads to a reduction in the generation of minority carriers.

The profile of the photocurrent density module as a function of the recombination velocity at the junction for different gallium doping rate is shown in Figure 5:

Figure 5. Photocurrent density module as a function of recombination velocity at junction for different doping values X

As shown in Figure 4, for low values of the recombination speed of minority carriers at the junction, the photocurrent density module remains very low and then increases until a constant maximum value corresponding to the short circuit photocurrent is reached. Thus, we find that the more we increase X, the lower the short circuit current density Jcc decreases. Indeed, Zunger et al. suggested that changing the defect energies of generated pairs remains a possible explanation of the effects of gallium doping on the photocurrent density module [16].

From these two previous figures we can see that the short circuit current density Jcc is more affected by the angle of incidence .

3.3. Photovoltage profile

The photovoltage is deduced from the density of minority carriers using the Boltzmann relation:

[picture] | (11)

with; is the thermal voltage, T is the absolute temperature at thermal equilibrium; k is the Boltzmann constant; is the density of the intrinsic carriers in the base and

Nb is the doping rate of impurities in the base.

In Figure 6, the photovoltage module is shown as a function of the recombination velocity at the junction, for different angles of incidence and gallium doping respectively:

Figure 6. Profile of the photovoltage module as a function of the recombination velocity at the junction for different angle of incidence values

The Figure 6 and Figure 7 show that for low SF values the photovoltage is maximum. This range corresponds to the open circuit voltage Vco. Thereafter, if one tends towards the high values of SF, the photovoltage gradually decreases and tends towards very small values. This domain corresponding to the short circuit. Figure 6 shows a slight decrease of the photovoltage module with the increase of the incidence angle. Figure 7 shows that the photovoltage module increases with increasing gallium doping.

Figure 7. Profile of the photovoltage module according to the recombination speed of the carriers at the junction for different doping values X

4. Conclusion

This article presents the results of the study of a CIGS-based solar cells, in frequency modulation, under monochromatic illumination with the influences of incidence angle and Gallium doping on minority carrier density, photocurrent density and photovoltage. The increase in incidence angle and gallium doping decreases the module of minority carriers density and photocurrent density. However, the increase in gallium doping increases photovoltage.

References

[1]   | P. Jackson, D. Hariskos, R.Wuerz, O. Kiowski, A. Bauer, T.M. Friedlmeier, M. Powalla, “Properties of Cu(In,Ga)Se₂ solar cells with new record efficiencies up to 21.7%”, Phys Status, Solidi RRL 9 (2015) 28-31.
[2]   | P. D. Paulson, R. W. Birkmire, and W. N. Shafarman. “Optical characterization of Cu(In,Ga)Se₂ alloy thin films by spectroscopic ellipsometry”.Journal of Applied Physics, 94(2), (2003) 879.
[3]   | O. Lundberg, M. Edoff, L. Stolt, “The effect ofGa-grading in CIGS thin film solar cells”, Thin Solid Films 480-481 (2005) 520-525.
[4]   | A.M. Gabor, J.R. Tuttle, M.H. Bode, A. Franz, A.L. Tennant, M.A. Contreras, R.Noufi, D.G. Jensen, A.M.Hermann, “Band-gap engineering in Cu(In,Ga) Se2 thin films grown from (In,Ga)2Se₃ precursors”, Sol. Energy Mater. Sol. Cells 41-42 (1996) 247-260.

[5]  
Ibrahima WADE*, Mor NDIAYE, Alain Kassine EHEMBA, Demba DIALLO, Moustapha DIENG «Junction recombination velocity determination initiating the short-circuit and limiting the open circuit of a monofacialesolar cells containing thin film Cu(In,Ga)Se₂ (CIGS) under horizontal illumination in static mode», IJESRT,4 (9), (September, 2015).

[6]  
Jean Jude Domingo, Alain Kassine Ehemba, Demba Diallo, Ibrahima Wade and MoustaphaDieng. «Study of the capacity of a manofacial solar cell based on CIGS under horizontal monochromatic illumination in frequency dynamic mode: the effect of the wavelength» Int. J. Adv. Res. 4(11), (23 November 2016), 711-719.

[7]   | N. Honma and C. Munakata, «Sample thickness dependence of minority carrier lifetimes measured using an ac photovoltaic method», Japan. J. Appl. Phys. 26, (1987) 2033-6.
[8]   | A. Dieng, I. Zerbo, M. Wade, A. S. Maiga et G. Sisoko, «Three-dimensional study of a polycrystalline silicon solar cell: the influence of the applied magnetic field on the elctrical parameters», Semicond. Sci. Technol. 26, (2011) pp: 5023-5032.
[9]   | J. N. Hollenhorst et G. Hasnain, «Frequency dependent whole diffusion in InGaAs double heterostructure» Appl. Phys. Lett, 65(15): (1995) 2203-2205.
[10]   | F. Ahmed et S. Garg, «simultaneous determination of diffusion length, lifetime and diffusion constant of minority carrier using a modulated beam» International Atomic Energy Agency. International centre for theorical physics. Internal report IC/86/129, 1987.
[11]   | J. Dugas, «3D modelling of a reverse cell made with improved multicrystalline silicon wafers». Solar Energy Materials and Solar Cells Volume 32. Issue 1, (January 1994). Pages71-88.
[12]   | T. Flohr et R. Helbig, «Determination of minority-carrier lifetime and surface recombination velocity by Optical-Beam-Iduced-Current measurements at different light wavelengths» J. Appl. Phys. Vol. 66(7), (1989) pp. 3060-3065.
[13]   | Sissoko, G., Museruka, C., Corréa, A., Gaye, I. and Ndiaye, A. L. (1996) Light Spectral Effect on Recombination Parameters of Silicon Solar Cell. World Renewable Energy Congress, Part III, 1487-1490.
[14]   | Morales-Acevedo «Effective absorption coefficient for graded band-gap semiconductors and the expected photocurrent density in solar cells». Solar Energy Materials & Solar Cells 93 (2009) 41-44.
[15]   | U. Rau andH.W. Schock. «Electronic properties of Cu(In,Ga)Se2 heterojunction solar cells-recent achievements, current understanding, and future challenges». AppliedPhysics A: Materials Science & Processing, 69(2), (August 1999) 131-147.
[16]   | Sunghun Jung, SeJinAhn, Jae Ho Yun, JihyeGwak, Donghwan Kim, Kyunghoon Yoon a,* «Effects of Ga contents on properties of CIGS thin films and solar cells fabricated by co-evaporation technique» Current Applied Physics 10 (2010) 990-996.