eng Science and Education Publishing American Journal of Modeling and Optimization 2333-1267 2022-08-23 9 1 1 5 10.12691/ajmo-9-1-1 AJMO2022911 article Jacklyn A. Descartin jdescartin@uc.edu.ph 1 Richard T. Saing 2 Ali Maihoib 2 Maria Jean R. Antolihao 2 Jelie E. Agostilo 2 Arnel N. Malaga 3 Darlyne I. Brigoli 4 Naval Architecture and Marine Engineering Department, University of Cebu-METC, Cebu City, Philippines Former Dean College of Engineering, University of Cebu, Cebu City, Philippines University of Cebu-METC, Cebu City, Philippines University of Cebu-Banilad, Cebu City, Philippines Ship design is an ongoing, never-ending challenge. With software calculation and simulation, modeling plays an integral part in making the design process more efficient and successful¡ªthe lack of testing facilities in the country. Ship designers tend to rely only on software simulation and calculation or experiment using alternative methods to test a new hull design model. Where inconsistency and lack of standards may lead to a misleading result, the team proposed a towing tank facility that could serve both the academic and industrial fields. It would open up a door of opportunities for ship designers, shipbuilders, and researchers to conduct model testing, which would help increase the efficiency and accuracy of new hull designs. For the first time in the country, the facility would make model testing available at various speeds and wave conditions. It would be capable of providing basic parameters including hull resistance, heave, pitch, roll, and trim heel angles. Those would be measured against a velocity range of 1 to 5 m/s. The facility should be a solid starting point to help individuals and groups implement hull design concepts, where fundamental data could be gathered, tabulated, and evaluated. http://pubs.sciepub.com/ajmo/9/1/1/ajmo-9-1-1.pdf towing tank UCMETC wave basin simulator