<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.0//EN" "http://www.ncbi.nlm.nih.gov:80/entrez/query/static/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
<PublisherName>Science and Education Publishing</PublisherName>
<JournalTitle>American Journal of Mechanical Engineering</JournalTitle>
<Issn>2328-4110</Issn>
<Volume>4</Volume>
<Issue>7</Issue>
<PubDate PubStatus="epublish">
<Year>2016</Year>
<Month>12</Month>
<Day>17</Day>
</PubDate>
</Journal>
<ArticleTitle>Result Correlation of Experimental and Numerical Modal Analysis of a Steel Beam</ArticleTitle>
<FirstPage>376</FirstPage>
<LastPage>379</LastPage>
<Language>EN</Language>
<AuthorList>
<Author>
<FirstName>Peter</FirstName>
<LastName>Pavelka</LastName>
<Affiliation>Department of Applied Mechanics and Mechanical Engineering, Faculty of Mechanical Engineering, Letná 9, 042 00 Košice, Slovakia</Affiliation>
</Author>
<Author>
<FirstName>Róbert</FirstName>
<LastName>Huňady</LastName>
</Author>
<Author>
<FirstName>Martin</FirstName>
<LastName>Hagara</LastName>
</Author>

</AuthorList>
<ArticleIdList>
<ArticleId IdType="pii">AJME20164726</ArticleId>
<ArticleId IdType="doi">10.12691/ajme-4-7-26</ArticleId>
</ArticleIdList>
<History>
<PubDate PubStatus="received">
<Year>2016</Year>
<Month>9</Month>
<Day>8</Day>
</PubDate>
<PubDate PubStatus="revised">
<Year>2016</Year>
<Month>10</Month>
<Day>22</Day>
</PubDate>
<PubDate PubStatus="accepted">
<Year>2016</Year>
<Month>12</Month>
<Day>15</Day>
</PubDate>
</History>
<Abstract>The paper deals with an experimental and a numerical investigation of dynamic properties of the structure. Object of interest is a steel rod with circle section. The modal parameters, such as mode shapes and natural frequencies, are obtained by two different ways: experimentally by using experimental modal analysis and numerically by finite element analysis which were computed in NX Nastran solver. The results from both methods are compared in NX through the correlation function. A relation between measured mode shapes and computed mode shapes is expressed by Modal Assurance Criterion. This process of comparing is appropriate for verification of experimental approaches.</Abstract>
</Article>
</ArticleSet>
