<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.0//EN" "http://www.ncbi.nlm.nih.gov:80/entrez/query/static/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
<PublisherName>Science and Education Publishing</PublisherName>
<JournalTitle>American Journal of Electrical and Electronic Engineering</JournalTitle>
<Issn>2328-7357</Issn>
<Volume>4</Volume>
<Issue>5</Issue>
<PubDate PubStatus="epublish">
<Year>2016</Year>
<Month>11</Month>
<Day>30</Day>
</PubDate>
</Journal>
<ArticleTitle>New Methodology for the Prediction of Motor Starting Effect on Bus Voltages of Interconnected Power Systems</ArticleTitle>
<FirstPage>139</FirstPage>
<LastPage>147</LastPage>
<Language>EN</Language>
<AuthorList>
<Author>
<FirstName>Alexis</FirstName>
<LastName>Polycarpou</LastName>
</Author>
<Author>
<FirstName>Hassan</FirstName>
<LastName>Nouri</LastName>
<Affiliation>Power Systems, Electronics and Control Research Laboratory, UWE Bristol BS16 1QY, UK</Affiliation>
</Author>
<Author>
<FirstName>Ali</FirstName>
<LastName>Azizpour</LastName>
</Author>

</AuthorList>
<ArticleIdList>
<ArticleId IdType="pii">AJEEE2016453</ArticleId>
<ArticleId IdType="doi">10.12691/ajeee-4-5-3</ArticleId>
</ArticleIdList>
<History>
<PubDate PubStatus="received">
<Year>2016</Year>
<Month>8</Month>
<Day>30</Day>
</PubDate>
<PubDate PubStatus="revised">
<Year>2016</Year>
<Month>10</Month>
<Day>6</Day>
</PubDate>
<PubDate PubStatus="accepted">
<Year>2016</Year>
<Month>11</Month>
<Day>28</Day>
</PubDate>
</History>
<Abstract>A new methodology is proposed in this paper capable of predicting the impact of induction motor load starting on the bus voltages of an interconnected power system. The profile of the voltage sag is predicted for each bus, which is used to improve the power quality of a system. The methodology is investigated with the use of a four bus, as well as fourteen bus IEEE interconnected system. Mathematical and simulation results demonstrate the effectiveness and applicability of the proposed methodology for the application.</Abstract>
</Article>
</ArticleSet>
