Dear Label_Name,

Greetings! I hope you are well.

I am writing on behalf of an international publishing house, Science and Education Publishing, USA (http://www.sciepub.com).

Science and Education Publishing (SciEP) is a multidisciplinary open access publisher of Journals covering the fields of Science, Technology and Medicine. All SciEP publications are subject to high-quality peer review, editorial and production processes and are freely available online.

Welcome to the April, 2013 edition of SciEP newsletter, providing monthly summaries of articles on science & education related topics of interest to scientist and professionals. The mission of our journals is to provide an open access forum for publishing new findings on issues pertinent to scientific and academic field. We also invite you to submit original research papers, review articles, short reports, or case studies are considered for publication in our Multidisciplinary Journals.

American Journal of Public Health Research
DOI: 10.12691/ajphr-1-1-3

The Implementation of a Tele-Homecare System with Service Oriented Architecture and HL7 Message Transmission Standard
Ching-Sung Wang

American Journal of Medical and Biological Research
DOI: 10.12691/ajmbr-1-1-2

The Influence of Ethanol on Pyruvate Kinases Activity in Vivo, in Vitro, in Silico
Lelevich Sergey Vladimirovich, Khrustalev Vladislav Victorovich, Barkovsky Eugene Victorovich, Shedogubova Tatyana Aleksandrovna

American Journal of Medical Sciences and Medicine
DOI: 10.12691/ajmsm-1-1-1

Clinical and Histological Features in Wegener Granulomatosis
Li Cavoli Gioacchino, Passantino Rita, Bono Luisa, Tortorici Calogera, Ferrantelli Angelo, Giammarresi Carlo, Rotolo Ugo

American Journal of Infectious Diseases and Microbiology
DOI: 10.12691/ajidm-1-1-2

The Curse of Lymphatic Filariasis: Would the Continual Use of Diethylcarbamazine Eliminate this Scourge in Papua New Guinea?
Anne Lanham, Lillian Mwanri

We have released issues of some journals on February 2013.
American Journal of Public Health Research
American Journal of Medical Sciences and Medicine
American Journal of Medical and Biological Research
American Journal of Pharmacological Sciences
American Journal of Clinical Medicine Research
American Journal of Nursing Research
American Journal of Cancer Prevention
American Journal of Medicine Studies
American Journal of Infectious Diseases and Microbiology
American Journal of Cardiovascular Disease Research
American Journal of Biomedical Research
American Journal of Mechanical Engineering
American Journal of Microbiological Research
Journal of Preventive Medicine
American Journal of Food and Nutrition
American Journal of Hypertension Research
American Journal of Sports Science and Medicine
Journal of Cancer Research and Treatment
American Journal of Zoological Research
Journal of Biomedical Engineering and Technology
American Journal of Microbiological Research
Biomedical Science and Engineering

We are pleased to announce that submissions are now being accepted for peer review for all the journals across all our subject areas in SciEP.

Please submit your manuscript via our online submission system:
http://www.sciepub.com/author/signin

To unsubscribe from our mailing list, please click on the following link: unsubscribe

I am looking forward to hearing from you.

Kind regards,

David Rain
Email:join@sciepub.com
Science and Education Publishing (http://www.sciepub.com)

Artificial Neural Network Model for Predicating Resilient Modulus of Silty Subgrade Soil

Noha K. Farh*, Ahmed M. Awed, Sherif M. El-Badawy

Public Works Engineering Department, Faculty of Engineering, Mansoura University, Mansoura, Egypt

Abstract: Recently machine learning is gaining acceptance in different civil engineering applications. In this study, an Artificial Neural Network (ANN) model is proposed to predict resilient modulus (MR) of a silty subgrade soil for pavement designs. A silty subgrade soil was compacted at the maximum dry density (γdopt) and optimum moisture content (OMC) according to the standard Proctor compaction. The resilient modulus test was then conducted on at least replicate samples of three groups of samples. The first group of samples were tested directly after compaction, the second group and third groups, after compaction at the standard Proctor effort were left in open air to dry over time or exposed to wetting to gain moisture. The testing results were then used to develop the ANN model. This model predicts MR of the soil based on water content (Wc), ratio of dry density over the maximum dry density at the optimum moisture content (γd/γdopt) and octahedral shear stress (τoct). After the ANN model architecture is set, the strengths and weaknesses of the developed model are examined by comparing the predicted versus measured MR values with respect to goodness-of-fit statistics. In addition, a sensitivity analysis of the model input parameters is performed.

Keywords: resilient modulus; artificial neural networks, subgrade, proctor compaction, moisture content

Received 09, 2020; Revised April 18, 2020; Accepted May 06, 2020

Citation: Noha K. Farh, Ahmed M. Awed, Sherif M. El-Badawy, Artificial Neural Network Model for Predicating Resilient Modulus of Silty Subgrade Soil. American Journal of Civil Engineering and Architecture, 8 (2). 52-55. January 2020. doi:10.12691/ajcea-8-2-4

1. Introduction

The resilient modulus (MR) has been recognized as an important stiffness parameter that characterizes pavement materials under moving traffic (AASHTO 1993). MR is defined as the ratio of the deviatoric stress to the resilient strain as shown in Eq. (1) [1].

[picture] | (1)

Uzan’s [2] model as presented in Eq. (2) was modified and incorporated in the Mechanistic-Empirical Pavement Design Guide (MEPDG). It is well-known as the universal Witczak model, for predicting MR for both coarse and fine materials.

[picture] | (2)

where; k₁, k₂, k₃ are regression parameters, pa is the atmospheric pressure (101.3 kPa), θ is the bulk stress θ = σ₁ + 2σ₃, σ₁ and σ₃ are the major and minor principal stresses; respectively and τoct is the octahedral shear stress

The resilient modulus of soils is affected by numerous factors such as state of stress, variation in moisture content, variation in matric suction, and basic soil properties such as particle gradation, particle shape, maximum particle size, liquid limit (LL), plasticity index (PI) and fines percentage (passing from sieve No. 200) [3,4,5,6,7]. Based on previous studies, research efforts presented that stress state and moisture content are the most significant key factors affecting MR of soils. Through the last 50 years, many researchers investigated the significant impact of the stress level on MR of subgrade soils [8,9,10,11] and demonstrated that there is no significant impact of the bulk stress on MR at low shear stress levels, on the other hand MR increases when the bulk stress increases at high shear stress levels. However, many studies demonstrated that the octahedral shear stress have a pronounced influence on the MR of fine materials [3,12,13].

Recently, ANN modeling technique has powerfully stand out for a broad domain of many engineering problems specially its success in featuring geotechnical engineering applications [14,15,16]. ANNs can integrate and associate both literature-based and exploratory data to figure out the best solution. ANNs’ applications can be summarized into pattern recognition, anticipation, modeling, and simulation. Such supervised interlinked networks are claimed to be applied in pavement material applications as an alternative to conventional predictive methodologies. For example, Meier et al. [17] built up a computer program, named as WESDEF, with ANN models to back calculate pavement layer moduli. The ANN models were trained to compute the layer moduli based on Falling Weight Deflectometer field data obtained from flexible pavement. As a consequence to continuous research efforts, Sharma and Das [18] were able to use ANN models to backcalculate layer moduli with better accuracy compared with other software, namely, EVERCALC and ExPaS. Moreover according to Far et al. [19], ANN modeling technique was used to estimate the dynamic modulus of the asphalt concrete layer. Very limited ANN models incorporating the influence of moisture together with the stress state for the resilient modulus prediction of fine materials were found in literature.

2. Objectives

The main objective of this paper is to use the ANN modeling technique for anticipating MR of common Egyptian silt as a pavement subgrade soil.

3. Material and Testing Program

A common Egyptian subgrade material was investigated in this study. This subgrade soil was sourced from an open excavation site located in El-Mahalla Al-Kubra, Gharbia, Egypt. The routine properties of the investigated soil, such as California Bearing Ratio (CBR), compaction characteristics, plastic limit, liquid limit, and fines percentage, were determined in the laboratory and the results are listed in Table 1. The data in the table show that the soil is classified as A-4 according to the American Association of State Highway and Transportation Officials (AASHTO) and ML according to the Unified Soil Classification System (USCS) methods. The standard compaction energy level was used to define the moisture-density relationship for the investigated silty soil. According to ASTM D698 - 12e2 (2012) [20], the standard volumetric energy density was estimated by 589.3 kJ/m³ (12300 ft-lbs/ft3) to generate the moisture-density curve at standard compactive effort presented in Figure 1.

Table 1. Routine Properties of the Investigated Subgrade Soil

It should be noted that laboratory test specimens were prepared simulating similar moisture changes to those occurring in the field. Test specimens were initially compacted at optimum water content and maximum dry density. After that, the samples were allowed to dry in open air to simulate drying condition or soaked in water to simulate wetting condition. By measuring the weight of the samples, the loss or gain of water was estimated. When the desired change in moisture was achieved, the MR test could be carried out. Several series of triaxial tests under cyclic loading conditions were conducted according to AASHTO T307 (2017) [25] on cylindrical soil specimens of 100 mm in diameter and 200 mm in height. According to the MR test protocol, each prepared specimen was conditioned at a confining pressure of 103.4 kPa over 500 cycles before applying the 15 testing sequences on the specimen. After all, a data set of 45 points covering three levels of moisture content (dry, optimum, and wet) and one compactive effort (standard) for one type of subgrade soil (low plasticity silt) were used in the modeling approach.

Figure 1. Standard Compaction Curve for the Low Plasticity Silty Subgrade Soil

4. Modeling Technique

In this study, researchers applied the Multilayer Perceptron Neural Networks tool in SPSS statistics software for predicting the MR values. To develop the ANN model, the available data set was rearranged randomly and divided into two separate data subsets for training and testing the proposed ANN model as shown in Table 2.

Table 2. Data Set Processing Structure for ANN Modeling Approach

Several ANN architectures were examined with different combinations of hidden layer numbers (neurons) and algorithm types to reach out the best modeling prediction. By using a hyperbolic tangent function, the best prediction was accomplished as shown in Figure 2. The proposed model is based on three input parameters that mostly affect MR for fine materials (Wc, γd/γdopt, and τoct). The different inputs with the adopted algorithm architectures are illustrated in Table 3 for the proposed ANN model.

Table 3. Summary of the Network Structure of the Proposed ANN Model

Figure 2. Feed-Forward Neural Network Structure

Table 4 summarizes the goodness-of-fit statistics of the feed-forward ANN model. The ANN model prediction for both training and testing subsets shows excellent results compared with experimental values with coefficient of determination (R²) of 0.99. Figure 3 confirmed the modeling predictions by graphically showing the relationship between measured and predictive MR values. The data fits perfectly almost on the line of equality showing highly accurate precision and minimal bias.

Figure 4 shows the sensitivity analysis of the ANN model input parameters. It is found that Wc has significantly higher influence on MR compared to the other input parameters (γd/γdopt and τoct).

Table 4. Statistical Parameters for the ANN Model

Figure 3. Measured vs. Predicted MR Values using ANN Model

Figure 4. Sensitivity Analysis of ANN Model Input Parameters

5. Conclusions and Recommendations

One low plasticity silty (ML) subgrade soil was used to develop ANN model to predict MR. Generally, the proposed ANN model was applied for predicting MR of subgrade soil with state of stress, water content and density ratio. The proposed ANN model was developed based on feed-forward neural network and perceptron technique with ANN structure (3-2-1) representing excellent modeling accuracy (R2 = 0.99).

Though, only ANN methodology is discussed in this paper, results indicate that the use of ANN in this context is promising and merits further consideration and analysis in subsequent work.

References

[1]   | H. B. Seed, C. K. Chan, and C. E. Lee, “Resilience characteristics of subgrade soils and their relation to fatigue failures in asphalt pavements,” in International Conference on the Structural Design of Asphalt Pavements. SupplementUniversity of Michigan, Ann Arbor, 1962.
[2]   | J. Uzan, “Characterization of granular material,” Transp. Res. Rec., vol. 1022, no. 1, pp. 52-59, 1985.
[3]   | F. Lekarp, U. Isacsson, and A. Dawson, “State of the art. I: Resilient response of unbound aggregates,” J. Transp. Eng., vol. 126, no. 1, pp. 66-75, 2000.
[4]   | D. Andrei, M. W. Witczak, and W. N. Houston, “Resilient modulus predictive model for unbound pavement materials,” in Contemporary Topics in Ground Modification, Problem Soils, and Geo-Support, 2009, pp. 401-408.
[5]   | M. Ba, “Effect of Compaction Moisture Content on the Resilient Modulus of Unbound Aggregates from Senegal (West Africa),” Geomaterials, vol. 02, no. 01, pp. 19-23, 2012.
[6]   | Y. Yao, J. Zheng, J. Zhang, J. Peng, and J. Li, “Model for Predicting Resilient Modulus of Unsaturated Subgrade Soils in South China,” KSCE J. Civ. Eng., vol. 22, no. 6, pp. 2089-2098, 2018.
[7]   | A. M. Rahim and K. P. George, “Models to estimate subgrade resilient modulus for pavement design,” Int. J. Pavement Eng., vol. 6, no. 2, pp. 89-96, 2005.
[8]   | C. L. Monismith, H. B. Seed, F. G. Mitry, and C. Chan, “Predictions of pavement deflections from laboratory tests,” in Second International Conference on the Structural Design of Asphalt PavementsUniversity of Michigan, Ann Arbor, 1967.
[9]   | P. Kolisoja, Resilient deformation characteristics of granular materials. Tampere University of Technology Finland, Publications, 1997.
[10]   | A. Cabrera, “Evaluation of the laboratory resilient modulus test using a New Mexico subgrade soil,” 2012.
[11]   | A. S. El-Ashwah, A. M. Awed, S. M. El-Badawy, and A. R. Gabr, “A new approach for developing resilient modulus master surface to characterize granular pavement materials and subgrade soils,” Constr. Build. Mater., vol. 194, pp. 372-385, 2018.
[12]   | R. Mousa, A. Gabr, M. G. Arab, A. Azam, and S. El-Badawy, “Resilient modulus for unbound granular materials and subgrade soils in Egypt,” in MATEC Web of Conferences, 2017, vol. 120, p. 6009.
[13]   | M. G. Arab, R. A. Mousa, A. R. Gabr, A. M. Azam, S. M. El-Badawy, and A. F. Hassan, “Resilient Behavior of Sodium Alginate-Treated Cohesive Soils for Pavement Applications,” J. Mater. Civ. Eng., vol. 31, no. 1, p. 4018361, 2019.
[14]   | M. A. Shahin, M. B. Jaksa, and H. R. Maier, “Artificial neural network applications in geotechnical engineering,” Aust. Geomech., vol. 36, no. 1, pp. 49-62, 2001.
[15]   | Y. M. Najjar, I. A. Basheer, H. E. Ali, and R. L. McReynolds, “Swelling potential of Kansas soils: Modeling and validation using artificial neural network reliability approach,” Transp. Res. Rec., vol. 1736, no. 1, pp. 141-147, 2000.
[16]   | R. Ranasinghe, M. B. Jaksa, Y. L. Kuo, and F. P. Nejad, “Application of artificial neural networks for predicting the impact of rolling dynamic compaction using dynamic cone penetrometer test results,” J. Rock Mech. Geotech. Eng., vol. 9, no. 2, pp. 340-349, 2017.
[17]   | R. W. Meier, D. R. Alexander, and R. B. Freeman, “Using artificial neural networks as a forward approach to backcalculation,” Transp. Res. Rec., vol. 1570, no. 1, pp. 126-133, 1997.
[18]   | S. Sharma and A. Das, “Backcalculation of pavement layer moduli from falling weight deflectometer data using an artificial neural network,” Can. J. Civ. Eng., vol. 35, no. 1, pp. 57-66, 2008.
[19]   | M. S. S. Far, B. S. Underwood, S. R. Ranjithan, Y. R. Kim, and N. Jackson, “Application of artificial neural networks for estimating dynamic modulus of asphalt concrete,” Transp. Res. Rec., vol. 2127, no. 1, pp. 173-186, 2009.
[20]   | ASTM D698 - 12e2, “Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3)),” 2012.
[21]   | ASTM:D1883, “Standard Test Method for CBR ( California Bearing Ratio ) of Laboratory-Compacted,” 2016.
[22]   | ASTM D4318, “Standard Test Methods for Liquid Limit , Plastic Limit , and Plasticity Index of Soils,” 2017.
[23]   | ASTM: D422 - 63, “ASTM D422: Standard Test Method for Particle-Size Analysis of Soils,” ASTM Stand. Guid., vol. i, no. Reapproved 2007, pp. 1-8, 2007.
[24]   | ASTM:D2487, “Standard Practice for Classification of Soils for Engineering Purposes ( Unified Soil Classification System ),” 2017.
[25]   | AASHTO T307, “Standard method of test for determining the resilient modulus of soils and aggregate materials,” Am. Assoc. State Highw. Transp. Off. Washingt., vol. 99, 2017.