﻿<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.0//EN" "http://www.ncbi.nlm.nih.gov:80/entrez/query/static/PubMed.dtd"[]>
<ArticleSet>
  <Article>
    <Journal>
      <PublisherName>Science and Education Publishing</PublisherName>
      <JournalTitle>American Journal of Biomedical Research</JournalTitle>
      <Issn>2328-3955</Issn>
      <Volume>3</Volume>
      <Issue>3</Issue>
      <PubDate PubStatus="epublish">
        <Year>2015</Year>
        <Month>07</Month>
        <Day>29</Day>
      </PubDate>
    </Journal>
    <ArticleTitle>Effect of Variations in Post-set Temperature and Monomer Concentration on Self-cure Acrylic Surface Candidal Growth: An In-vitro Study</ArticleTitle>
    <FirstPage>45</FirstPage>
    <LastPage>52</LastPage>
    <Language>EN</Language>
    <AuthorList>
      <Author>
        <FirstName>Nimra</FirstName>
        <LastName>Tahir</LastName>
      </Author>
      <Author>
        <FirstName>Faisal</FirstName>
        <LastName>Moeen</LastName>
        <Affiliation>Department of Dental Materials, Islamic International Dental College, Riphah University, Islamabad</Affiliation>
      </Author>
      <Author>
        <FirstName>Muhammad Humza Bin</FirstName>
        <LastName>Saeed</LastName>
      </Author>
    </AuthorList>
    <ArticleIdList>
      <ArticleId IdType="pii">AJBR2015333</ArticleId>
      <ArticleId IdType="doi">10.12691/ajbr-3-3-3</ArticleId>
    </ArticleIdList>
    <History>
      <PubDate PubStatus="received">
        <Year>2015</Year>
        <Month>06</Month>
        <Day>11</Day>
      </PubDate>
      <PubDate PubStatus="revised">
        <Year>2015</Year>
        <Month>07</Month>
        <Day>06</Day>
      </PubDate>
      <PubDate PubStatus="accepted">
        <Year>2015</Year>
        <Month>07</Month>
        <Day>29</Day>
      </PubDate>
    </History>
    <Abstract>Objectives: To identify the effect of variations in power-liquid ratio and post-set temperature on water absorption and residual monomer concentration on growth of Candida albicans on self-cure denture base resins. Methodology: 60 self-cured acrylic discs (39 x 4mm) were made and divided into 3 groups each having 20 specimens. Group 1 consisted of discs fabricated at a powder-liquid ratio of 5.1:2.8 as recommended by the manufacturer. Groups 2 and 3 constituted specimens with variations in post-set temperatures and powder-liquid ratios respectively. Specimens from group 2 were soaked in four water baths at temperatures of 37°C, 47°C, 57°C and 67°C for 24 hours. Specimens from the temperature-controlled group 3 were fabricated at four different powder-liquid ratios by increasing monomer liquid volume by 10%, 15%, 20% and 25%. The acrylic discs from control groups 1 and 3 were soaked at a constant temperature of 37°C for 24 hours. Residual monomer leeched out from disc into water was analyzed using Ultraviolet spectrophotometer. The variations in water absorption and Candidal growth were recorded. Results: Linear regression analysis was used to analyze the results. A moderately positive correlation was calculated for the association between powder-liquid ratio and Candidal growth (r = 0.67, p &lt; 0.001) suggesting Candidal growth is higher at increased powder-liquid ratios having low monomer content. The correlation between the Candidal growth and the post-set temperatures was found to be moderately negative (r = -0.41 p &lt; 0.001), indicating a decrease in Candidal cells on increasing post-set soaking temperatures. Conclusions: Candidal growth follows a positive linear relation with a decreasing powder-liquid ratio having cells increasing with an increase in liquid monomer content. Candidal growth follows a negative linear relation with post-set temperature soaking with cells decreasing with an increase in temperature.</Abstract>
  </Article>
</ArticleSet>