Dear Label_Name,

Greetings! I hope you are well.

I am writing on behalf of an international publishing house, Science and Education Publishing, USA (http://www.sciepub.com).

Science and Education Publishing (SciEP) is a multidisciplinary open access publisher of Journals covering the fields of Science, Technology and Medicine. All SciEP publications are subject to high-quality peer review, editorial and production processes and are freely available online.

Welcome to the April, 2013 edition of SciEP newsletter, providing monthly summaries of articles on science & education related topics of interest to scientist and professionals. The mission of our journals is to provide an open access forum for publishing new findings on issues pertinent to scientific and academic field. We also invite you to submit original research papers, review articles, short reports, or case studies are considered for publication in our Multidisciplinary Journals.

American Journal of Public Health Research
DOI: 10.12691/ajphr-1-1-3

The Implementation of a Tele-Homecare System with Service Oriented Architecture and HL7 Message Transmission Standard
Ching-Sung Wang

American Journal of Medical and Biological Research
DOI: 10.12691/ajmbr-1-1-2

The Influence of Ethanol on Pyruvate Kinases Activity in Vivo, in Vitro, in Silico
Lelevich Sergey Vladimirovich, Khrustalev Vladislav Victorovich, Barkovsky Eugene Victorovich, Shedogubova Tatyana Aleksandrovna

American Journal of Medical Sciences and Medicine
DOI: 10.12691/ajmsm-1-1-1

Clinical and Histological Features in Wegener Granulomatosis
Li Cavoli Gioacchino, Passantino Rita, Bono Luisa, Tortorici Calogera, Ferrantelli Angelo, Giammarresi Carlo, Rotolo Ugo

American Journal of Infectious Diseases and Microbiology
DOI: 10.12691/ajidm-1-1-2

The Curse of Lymphatic Filariasis: Would the Continual Use of Diethylcarbamazine Eliminate this Scourge in Papua New Guinea?
Anne Lanham, Lillian Mwanri

We have released issues of some journals on February 2013.
American Journal of Public Health Research
American Journal of Medical Sciences and Medicine
American Journal of Medical and Biological Research
American Journal of Pharmacological Sciences
American Journal of Clinical Medicine Research
American Journal of Nursing Research
American Journal of Cancer Prevention
American Journal of Medicine Studies
American Journal of Infectious Diseases and Microbiology
American Journal of Cardiovascular Disease Research
American Journal of Biomedical Research
American Journal of Mechanical Engineering
American Journal of Microbiological Research
Journal of Preventive Medicine
American Journal of Food and Nutrition
American Journal of Hypertension Research
American Journal of Sports Science and Medicine
Journal of Cancer Research and Treatment
American Journal of Zoological Research
Journal of Biomedical Engineering and Technology
American Journal of Microbiological Research
Biomedical Science and Engineering

We are pleased to announce that submissions are now being accepted for peer review for all the journals across all our subject areas in SciEP.

Please submit your manuscript via our online submission system:
http://www.sciepub.com/author/signin

To unsubscribe from our mailing list, please click on the following link: unsubscribe

I am looking forward to hearing from you.

Kind regards,

David Rain
Email:join@sciepub.com
Science and Education Publishing (http://www.sciepub.com)

Cost Effectiveness Statistic: A Proposal to Take Into Account the Patient Stratification Factors

Ciro D'Urso

ICT Department, Italian Senate, LUMSA University, Rome, Italy

Abstract: The formula here proposed can be used to conduct economic analysis in randomized clinical trials. It is based on a statistical approach and aims at calculating a revised version of the incremental cost-effective ratio (ICER) in order to take into account the key factors that can influence the choice of therapy causing confounding by indication. Let us take as an example a new therapy to treat cancer being compared to an existing therapy with effectiveness taken as time to death. A challenging problem is that the ICER is defined in terms of means over the entire treatment groups. It makes no provision for stratification by groups of patients with differing risk of death. For example, for a fair and unbiased analysis, one would desire to compare time to death in groups with similar life expectancy which would be impacted by factors such as age, gender, disease severity, etc. The method we decided to apply is borrowed by cluster analysis and aims at (i) discard any outliers in the set under analysis that may arise, (ii) identify groups (i.e. clusters) of patients with "similar" key factors.

Keywords: ICER, cost effectiveness analysis, cluster analysis, outlier identification

Received September 17, 2013; Revised October 07, 2013; Accepted October 09, 2013

Citation: Ciro D'Urso, Cost Effectiveness Statistic: A Proposal to Take Into Account the Patient Stratification Factors. American Journal of Applied Mathematics and Statistics, 1 (5). 87-89. January 2013. doi:10.12691/ajams-1-5-2

1. Introduction

The value of a new drug or therapy is often evaluated in terms of Incremental Cost Effectiveness Ratio (ICER) [1]. It is an equation used commonly in health economics to provide a practical approach to decision making regarding health interventions, in fact within a trial of two interventions it is the measure primarily used to compare the cost-effectiveness of the experimental treatment relative to the control treatment. The equation for ICER is:

Where and are the mean costs, and and are the mean effects for the experimental and control treatments, respectively.

In order to take into account characteristic key factors of the therapy (e.g. age, LVEF and NYHA in a ICD therapy [2]), we consider the generic set P of n patients each described by m variables (key factors) as a data table with n rows and m columns. Our goal can be stated as follows:

Goal. Identify k subsets (called ) of the set P containing elements with , such that each of them contains patients with similar key factors, and such that: , with the numbers of outliers discarded by the method. The calculation of the index on the elements of each group of patients must lead us to construct the overall incremental cost effectiveness ratio (ICER).

Although we could assume some statistical properties of the distributions involved, in the following we will work under the following hypothesis:

Hypotesis. No assumption about prior distribution or other parametric choices will be considered.

2. Related Work

Methods for describing the distributional properties of ICER statistics have been reported in the past, however, they are challenging even before the notion of stratification is added. In general, the distribution of the ratio of two statistics (in this case, the ratio in the difference of two means) is complicated. Interesting approaches such as Fieller’s theorem have been suggested. More successful have been approaches base on the bootstrap [3]. However the work of Abadie and Imbens [4] suggests more caution should be exercised before approaches based on patient matching and stratification are embarked upon.

3. Rationale of the Method

An outlier is an observation that, as atypical or erroneous, deviates significantly from the behavior of other data, with reference to the type of analysis considered [5,6,7]. In our problem there could be among the patients a subset with some characteristics (i.e. key factors) very dissimilar to the others that could negatively affect the economic analysis in randomized clinical trials.

The method proposed exploits the theories of cluster analysis, and as a first step it identifies those points of the set under analysis that have "distance" from the centroid (in terms of standard deviations) more than a specific threshold away. As an example to make clear the idea, in Figure 1 is depicted the Mahalanobis distance from the centroid of each point in a certain set of data. The potential outliers are those more distant from the centroid. The Mahalanobis distance is one of the possible distance that can be considered, it has the important characteristic that it takes into account the context of the data that is the relation between data. The rational is the same for the more common euclidean distance as well.

Figure 1. Distance from each point in a set to the centroid (the spikes are potential errors in the set)

Figure 2. Representation of a typical scenario after the application of cluster analysis to the data of the patients involving in clinical trials

The cluster analysis applied to the set of patients data identifies a certain number (say k) of groups. In each of these group it will be calculated the incremental cost effective ratio. At this point the analysis applied may provide a situation similar to that depicted in the Figure 2. The clusters obtained in this way are composed intrinsically of a homogeneous set of individuals and contain both patients belonging to the experimental treatment group and patients belonging to the control treatment group. Thus for each of these clusters it is possible to calculate the index , and then calculate the overall ICER in accordance with the formula provided in the following (see Step 3).

4. Solution

Here it is proposed a method based on cluster analysis. In particular we try to automate the calculation by means of classification of patients in a set of clusters in order to achieve the goal. The method is composed of three sequential steps described in the following (the diagram is provided in Figure 3):

4.1. Step One (Cluster Analysis)

First of all the data related to the patients are stored in an array P of n rows (total number of the patients involved in the clinical trial) and m columns (number of key factors). We assume that from a particular attribute of each patient (e.g. the identification code) we can distinguish if he belongs to the experimental treatment group or to the control treatment group.

The algorithm called DBSCAN is applied to the objects in P. It is a data clustering algorithm proposed by Martin Ester, Hans-Peter Kriegel, Jörg Sander and Xiaowei Xu in 1996 [8]. It is a density-based clustering algorithm because it finds a number of clusters starting from the estimated density distribution of corresponding nodes. DBSCAN is one of the most common clustering algorithms and also most cited in scientific literature (see appendix for the code provided in the Octave software environment [9]).

After the application of the algorithm, the objects (i.e. the rows of the array) are classified in k clusters plus a set of outlier data (cluster labeled '-1') that represents the patients with characteristics too different from the others as to suggest that they have been wrongly chosen for the trial (see Figure 2).

4.2. Step Two (Calculation of Each ICERj)

Once we got the k groups of patients we can calculate k indexes ICERj distinguishing between the individuals belonging to the experimental treatment group and those belonging to the control treatment group, as follows:

where:

k are the clusters identified in step 1

and are the mean costs, and and are the mean effects for the experimental and control treatments, respectively.

4.3. Step Three (Calculation of the Overall ICER)

The final step consists in the calculation of the overall incremental cost effectiveness ratio based on a weighted average of contributions from the k ratios obtained in step two.

where:

,, number of patients in the cluster j

number of patients discarded as potential outliers

, number of patients involved in the clinical trial

In the following diagram is represented the logical flow of the method.

Figure 3. Logical flow of the proposed solution

5. Conclusion

The method proposed takes into account the effect of strata in a population of patients. It uses the key factors associated to each patients as inner properties in order to group them and apply the computation separately for each homogenous group. No assumption about prior distribution or other parametric choices has been considered. The descriptive parameters of the new overall ICER can be written as a function of the corresponding descriptive measures of each index :

Therefore the variability of overall ratio can be expressed in terms of variability of the k indexes (see reference [10] for a comparison of four methods of confidence intervals computation for the not stratified version of ICER).

The action of disregarding anomalous data (see step 1 of the process and the notion of outliers) introduces a particular robustness in the proposed method. First of all we observe that clustering the data as the first step of the method allows analysis of homogeneous group of patients minimizing the overall effect of the observational nature of the data (i.e. non-random). We can state that such an algorithm is able to create subsets within a patient population that can provide more detailed information about how the patient will respond to a given drug. Furthermore missing data or anomalous data can be distinguished and labeled as outliers in the first step of the process, and besides if there are some patients with censored data it is very likely that they are grouped in the same cluster.

References

[1]   | Drummond MF. Principles of economics appraisal in health care. Oxford University Press, 1980.
[2]   | Sheldon R, et alt.. Effect of clinic risk stratification on cost-effectiveness of the implantable cardioverter-defibrillator: the canadian implantable defibrillator study. Circulation, 2001, 104:1622-1626.
[3]   | Campbell MK and Torgenson DJ. Bootstrapping: estimating confidence intervals for cost effectiveness ratios. Q J Med, 1999; 92:177-182.
[4]   | Abadie A and Imbens GW. On the Failure of the Bootstrap for Matching Estimators. Econometrica, 2008, Vol. 76, No. 6, pp. 1537-1557.
[5]   | P. Davies and U. Gather, "The identification of multiple outliers," In Journal of the American Statistical Association, 88, 1993, p. 782-801.
[6]   | John Dunagan, Santosh Vempala: "Optimal outlier removal in high-dimensional spaces". J. Comput. Syst. Sci. 68(2): 335-373, 2004.
[7]   | M. Riani, S. Zani, "An iterative method for the detection of multivariate outliers", Metron, Vol.55, pp. 101-117, (1997).

[8]  
Ester M, Kriegel HP, Sander J, Xiaowei Xu. A density-based algorithm for discovering clusters in large spatial databases with noise. In Evangelos Simoudis, Jiawei Han, Usama M. Fayyad. Proceedings of the Second International Conference on Knowledge Discovery and Data Mining 1996. AAAI Press. pp. 226-231.

[9]   | http://www.gnu.org/software/octave/.
[10]   | D. Polsky, H.A. Glick, et al., "Confidence intervals for cost-effectiveness ratios: a comparison of four methods", Health Economics, Vol.6, pp 243-252, 1997.