American Journal of Materials Engineering and Technology
ISSN (Print): 2333-8903 ISSN (Online): 2333-8911 Website: http://www.sciepub.com/journal/materials Editor-in-chief: Serge Samper
Open Access
Journal Browser
Go
American Journal of Materials Engineering and Technology. 2019, 7(1), 1-6
DOI: 10.12691/materials-7-1-1
Open AccessArticle

Effect of Burnishing Forces on Turning Surfaces

Yaser A. Hadi1,

1Yanbu Industrial College, Royal Commission for Jubail and Yanbu, Saudi Arabia

Pub. Date: January 22, 2019

Cite this paper:
Yaser A. Hadi. Effect of Burnishing Forces on Turning Surfaces. American Journal of Materials Engineering and Technology. 2019; 7(1):1-6. doi: 10.12691/materials-7-1-1

Abstract

Forces play an effective role in a burnish surfaces. Where burnishing technique utilizes a moving force device, squeezed against the workpiece, to accomplish plastic twisting of the surface layer. Another burnishing device was presented in this investigation, which empowers ball-burnishing process in site in the wake of turning without discharging the workpiece. Impact of burnishing parameters, which are burnishing feed, burnishing speed, and burnishing force upon conclusive roughness surface were illustrated. Burnishing results demonstrated noteworthy viability of the burnishing tool simultaneously. The surface roughness of the turned test examples were enhanced by burnishing. For the treated material in this investigation, the best consequences of surface roughness was acquired with a range of ball burnishing forces, rate it 64, 136, and 200. The base surface roughness was acquired at a feed rate 0.088 mm/rev. what is more, a speed of 48.24 m/min. The littler roundness mistake additionally can be accomplished by utilizing burnishing velocities running between 48.24 to 68.56 m/min. with a polishing feed of 0.088 mm/rev. It was confirmed at the end of the research that the surface roughness increments with low burnishing force and at high speed for various feeds utilizing one ball burnishing.

Keywords:
burnishing force surface roughness burnishing parameters

Creative CommonsThis work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

References:

[1]  Yu, X., Wang, L., (1999),Effect of various parameters on the surface roughness of an aluminum alloy burnished with a spherical surfaced polycrystalline diamond tool, Int. J. Mach. Tools Manuf., 39, pp. 459-469.
 
[2]  Mamalis, A.G., Grabchenko, A.I., Horv´ ath, M., M´esz´ aros, I., Paulmier, D., (2001),Ultraprecision metal removal processing of mirror-surfaces, J. Mater. Process. Technol., 108, pp (269-277).
 
[3]  Shiou, F.J., Chen, C.C.A., Li, W.T., (2003). Automated surface finishing of plastic injection mould steel with spherical grinding and ball burnishing processes, Int. J. Adv. Manuf. Technol., 28, pp. 61-66.
 
[4]  Luca, L., Neagu-Ventzel, S., Marinescu, I., (2005). Effects of working parameters on surface finish in ball burnishing of hardened steels, Precis. Eng., 29, pp. 253-256.
 
[5]  Fang-Jung Shiou, Chih-Cheng Hsu, (2008). Surface finishing of hardened and tempered stainless tool steel using sequential ball grinding, ball burnishing and ball-polishing processes on a machining centre, journal of materials processing technology, 205, pp. 249-258.
 
[6]  M.H. El-Axir, M.M. El-Khabeery, (2003). Influence of orthogonal burnishing parameters on surface characteristics for various materials, Journal of Materials Processing Technology, 132, pp. 82-89.
 
[7]  Firas M. F. Al Quran, (2015). The Effect of Roller Burnishing on Surface Hardness and Roughness of Aluminum Alloy, International Journal of Mechanics and Applications, 5(2): pp. 37-40.
 
[8]  Fang-Jung Shiou, Chih-ChengHsu, (2008),.Surface finishing of hardened and tempered stainless tool steel using sequential ball grinding, ball burnishing and ball polishing processes on a machining centre.Journal of Materials Processing Technology. 205(1-3), pp. 249-258.
 
[9]  Mieczystaw Korzynski, (2007). Modeling and experimental validation of the force–surface roughness relation for smoothing burnishing with a spherical tool, International Journal of Machine Tools & Manufacture, 47, pp. 1956-1964.
 
[10]  S. Mezlini, S Mzali, S Sghaier, Chedly Braham, Philippe Kapsa, (2014). Effect of a combined machining/burnishing tool on the roughness and mechanical properties, Lubrication Science, Wiley, 26, pp.175-187.
 
[11]  El-Axir, M. H., and Ibrahim, A. A., (2005). Some surface characteristics due to center rest ball burnishing, J. Materials Processing Technology, 167, 1, pp. 47-53.
 
[12]  N. Cho J. Tu., (2001). Roundness modeling of machined parts for tolerance analysis. Precision Engineering, 25(1), pp. 35-47.
 
[13]  Hamid Hamadache, Zahia Zemouri, Lakhdar Laouar, Serge Dominiak, (2014). Improvement of surface conditions of 36 Cr Ni Mo 6 steel by ball burnishing process, Journal of Mechanical Science and Technology, 28(4), pp. 1491-1498.
 
[14]  J. Caudill, B. Huanga, C. Arvina, J. Schoop, K. Meyer, I .S. Jawahir, (2014), Enhancing the Surface Integrity of Ti-6Al-4V Alloy through Cryogenic Burnishing, Procedia CIRP, 13, pp. 243-248.