Analysis of the Effects of Corrosion in Marine Heat Exchanger Performance in Two Media

Bebeteidoh Oyinkepreye Lucky^1, , Robert Poku¹ and Amula Timi¹

¹Marine/Mechanical Engineering Department, Niger Delta University, P.M.B 071, Yenagoa, Nigeria

Cite this paper:
Bebeteidoh Oyinkepreye Lucky, Robert Poku and Amula Timi. Analysis of the Effects of Corrosion in Marine Heat Exchanger Performance in Two Media. American Journal of Marine Science. 2017; 5(1):1-8. doi: 10.12691/marine-5-1-1

Abstract

This paper investigates the rate of corrosion of cast steel and copper tubes of grades C-1020 and C-642 in marine heat exchangers. The sturdiness of both cast steel and copper depends mostly on the environment they find themselves. Among these are freshwater, seawater and temperature. Both metals were exposed to different concentrations. The effects were investigated using weight loss method and the results from the study showed that cast steel corrodes faster with greater weight loss than copper in all the test media as the corrosion rate for cast steel at 0.000004 M, 0.1 M and 0.2 M concentration ranged from 0.0452mm/yr. – 0.0656mm/yr. and that of copper tested at 0.000004, 0.1M and 0.2M gave corrosion rates from 0.0363mm/yr. – 0.0006mm/yr. The surface analysis carried out with the help of an Inverted metallurgical microscope (IMM) showed the micrographs of the metal surfaces which revealed indications of general corrosion on the specimens and the corrosion impact was observed significantly less in the copper specimen than in the cast steel specimen. The hardness and tensile strength tests were also carried out to further specify the effects of corrosion on the strength of the metals. The difference in hardness and tensile strength between the specimens revealed that the copper specimen was of higher tensile strength and hardness than the cast steel specimen which makes the copper specimen more resistant to corrosion than the cast steel.

Keywords:
heat exchanger media surface analysis hardness test corrosion rate

This work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

References:

[1]	Poku R., Bebeteidoh O. L., and Ezenwa A. O. (2015). “Effects, Evaluation and Corrosion of Heat Exchangers Performance in Seawater.” American Journal of Engineering Research, Vol. 4, Issue 9, pp- 87-95
[2]	Kocheemoolayil G.E and Andy.M (2015). “Marine Corrosion and its Management” 2nd International Conference on Science and Technology and Management, University of Delhi
[3]	Oparaodu, K. O., & Okpokwasili, G. C. (2014). Comparison of Percentage Weight Loss and Corrosion Rate Trends in Different Metal Coupons from two Soil Environments. International Journal of Environmental Bioremediation & Biodegradation, 2(5), 243-249.
[4]	ME, A. S. M. (2011). Controlling corrosion in marine refrigeration systems. ASHRAE Journal, 53(4), 50.
[5]	Abdel-Samad, A., Soud, Y., & Zaki, M. (2014). Influence of Paint on Steel Corrosion for Marine Applications. Journal of Surface Engineered Materials and Advanced Technology, 4(04), 189.
[6]	Samal, S., Bhattaacharyya, A., & Mitra, S. K. (2011). Study on Corrosion Behavior of Pearlitic Rail Steel. Journal of Minerals and Materials Characterization and Engineering, 10(07), 573.
[7]	Fadare, D. A., & Fadara, T. G. (2013). Corrosion resistance of heat-treated NST 37-2 steel in hydrochloric acid solution. Journal of Minerals and Materials Characterization and Engineering, 1(01), 1.
[8]	Mobin, M., & Shabnam, H. (2010). Corrosion behavior of mild steel and SS 304L in presence of dissolved copper. Journal of Minerals and Materials Characterization and Engineering, 9(12), 1113.
[9]	Arturo, R. L., Miguel Toledo, V., Pedro, Q. D., Florencio, S. S., Juan, A. F., & Celerino, R. R. (2011). The Design of Heat Exchangers. Engineering, 2011.
[10]	Mizonov, V., Yelin, N., & Yakimychev, P. (2011). A cell model to describe and optimize heat and mass transfer in contact heat exchangers. Energy and Power Engineering, 3(02), 144.
[11]	Khorshidi, J., & Heidari, S. (2016). Design and Construction of a Spiral Heat Exchanger. Advances in Chemical Engineering and Science, 6(02), 201.
[12]	Lebele-Alawa, B. T., & Ohia, I. O. (2014). Influence of Fouling on Heat Exchanger Effectiveness in a Polyethylene Plant. Energy and Power, 4(2), 29-34.
[13]	Ahilan, C., Kumanan, S., & Sivakumaran, N. (2011). Online performance assessment of heat exchanger using artificial neural networks. Journal homepage: www. IJEE. IEEFoundation. org, 2(5), 829-844.
[14]	Adumene, S. (2016). Design and Off-Design Performance Evaluation of Heat Exchanger in an Offshore Process Configuration. Open Access Library Journal, 3(06), 1.
[15]	Khorshidi, J., & Heidari, S. (2016). Design and Construction of a Spiral Heat Exchanger. Advances in Chemical Engineering and Science, 6(02), 201.