Journal of Optoelectronics Engineering
ISSN (Print): 2372-4773 ISSN (Online): 2372-4781 Website: http://www.sciepub.com/journal/joe Editor-in-chief: Apply for this position
Open Access
Journal Browser
Go
Journal of Optoelectronics Engineering. 2017, 5(1), 7-9
DOI: 10.12691/joe-5-1-2
Open AccessArticle

Luminescent Phosphor-in-Glass Composite for White Light-Emitting Diodes

M.A. Kistankina1, , V.A. Aseev1, J.V. Tuzova1, K.D. Mynbaev1, 2, V.E. Bougrov2, N.V. Nikonorov1 and A.E. Romanov1, 2

1ITMO University, Saint-Petersburg, Russia

2Ioffe Institute, Saint-Petersburg, Russia

Pub. Date: March 25, 2017

Cite this paper:
M.A. Kistankina, V.A. Aseev, J.V. Tuzova, K.D. Mynbaev, V.E. Bougrov, N.V. Nikonorov and A.E. Romanov. Luminescent Phosphor-in-Glass Composite for White Light-Emitting Diodes. Journal of Optoelectronics Engineering. 2017; 5(1):7-9. doi: 10.12691/joe-5-1-2

Abstract

A luminescent composite material based on YAG:Ce3+–doped silicate glass (Phosphor-in-Glass, PiG) was fabricated and studied. For the glass matrix, the 40SiO2–25PbF2–20PbO(Pb3O4)–15AlF3 material was used. PiG samples were sintered at the temperature 550°C with concentration of YAG:Ce3+ varying from 90% down to 50%. Luminescence spectra of the PiG samples were recorded and quantum efficiency of the experimental samples was measured with the use of an integrating optical sphere. A design of light-emitting diode (LED) modules with the sintered PiG was developed and the temperature of the surface of the modules was analyzed.

Keywords:
phosphor-in-glass luminescence LED

Creative CommonsThis work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

References:

[1]  Chen, L., Lin, C.-C., Yeh, C.-W., and Liu, R.-S., „Light Converting Inorganic Phosphors for White Light-Emitting Diodes”, Materials, 3 (3). 2172-2195. Mar. 2010.
 
[2]  Aseev, V.A., Golubkov, V.V., Kolobkova, E.V., and Nikonorov, N.V., “Lead Lanthanide Oxyfluorides in a Glasslike matrix”, Glass Physics and Chemistry, 38 (2). 212-217. Apr. 2012.
 
[3]  Kim, A.A., Nikonorov, N.V., Sidorov, A.I., Tsekhomskii, V.A., and Shirshnev, P.S. “Nonlinear Optical Effects in Glass Containing Copper Chloride Nanocrystals”, Technical Physics Letters, 37 (5). 401-403. May 2011.
 
[4]  Cui, Z., Ye R., Deng, D., Hua, Y., Zhao, S., Jia, G., Li, C., and Xu, S., “Eu2+/Sm3+ ions co-doped white light luminescence SrSiO3 glass-ceramics phosphor for White LED”, Journal of Alloys and Compounds, 509 (8). 3553-3558. Feb. 2011.
 
[5]  Fujita, S. and Tanabe, S., “Fabrication, microstructure and optical properties of Er3+:YAG glass-ceramics”, Optical Materials, 32 (9). 886-890. Jul. 2010.
 
[6]  Yi, X., Zhou, S., Chen, C., Lin, H., Feng, Y., Wang, K., and Ni, Y., “Fabrication of Ce:YAG, Ce, Cr:YAG and Ce:YAG/Ce,Cr:YAG dual-layered composite phosphor ceramics for the application of white LEDs”, Ceramics International, 40 (5). 7043-7047. Jun. 2014.
 
[7]  Chen, L.-Y., Cheng, W.-C., Tsai, C.-C., Huang, Y.-C., Lin, Y.-S., and Cheng, W-H., „High-performance glass phosphor for white-light-emitting diodes via reduction of Si-Ce3+:YAG inter-diffusion”, Optical Materials Express, 4 (1). 121-128. Jan. 2013.
 
[8]  Cui, Z., Jia, G., Deng, D., Hua, Y., Zhao, S., Huang, L., Wang, H., Ma, H., and Xu, S., “Synthesis and luminescence properties of glass ceramics containing MSiO3:Eu2+ (M=Ca, Sr, Ba) phosphor for white LED”, Journal of Luminescence, 132 (1). 153-160. Jan. 2012.
 
[9]  Sun, J., Sun, Y., La,i J., Xia, Z., and Du, H., “Luminescence properties and energy transfer investigations of BaAl2B2O7:Ce3+, Tb3+ phosphors”, Journal of Luminescence, 132 (11). 3048-3052. Nov. 2012.
 
[10]  Ueda, J., and Tanabe, S., “Active glass ceramics containing functional crystals for photonics”, Journal of Australian Ceramic Society, 49 (1). 26-29. Jan. 2013.
 
[11]  Zhang, R., Lin, H., Yu, Y, Chen, D., Xu, J., and Wang, Y., “A new-generation color converter for high-power white LED: transparent Ce3+:YAG phosphor-in-glass”, Laser & Photonics Review, 8 (1). 158-164. Jan. 2014.
 
[12]  Ji, E.K., Song, Y.H., Lee, M.-J., and Yoon, D.-H., “Thermally stable phosphor-in-glass for enhancement of characteristic in high power LED applications”, Materials Letters, 157.89-92 Oct. 2015.
 
[13]  Shvaleva, M.A., Tuzova J.V., Aseev, V.A., Mynbaev, K.D., Romanov, A.E., Nikonorov, N.V., and Bougrov, V.E., “Optical and thermal properties of phosphors based on lead-silicate glass for high-power white LEDs”, Technical Physics Letters, 41 (11). 1041-1043. Nov. 2015.
 
[14]  Shvaleva, M.A., Nikulina, L.A., Aseev, V.A., Mynbaev, K.D., Bougrov, V.E., Kovsh, A.R., Odnoblyudov, M.A., Nikonorov, N.V., and Romanov, A.E., “Ce3+:YAG Doped Glass-Ceramics for White Light-Emitting Diode”, Optical Review. 21 (5), 683-686. Oct. 2014.