Journal of Automation and Control
ISSN (Print): 2372-3033 ISSN (Online): 2372-3041 Website: http://www.sciepub.com/journal/automation Editor-in-chief: Santosh Nanda
Open Access
Journal Browser
Go
Journal of Automation and Control. 2017, 5(2), 37-40
DOI: 10.12691/automation-5-2-1
Open AccessArticle

Condition Evaluation of Optical Position Sensor

Tatiana Kelemenová1, , Miroslav Dovica1, Eduard Jakubkovič1 and Peter Sedlačko1

1Department of Biomedical Engineering and Measurement, Technical University of Kosice, Faculty of Mechanical Engineering, Kosice, Slovak Republic

Pub. Date: December 11, 2017

Cite this paper:
Tatiana Kelemenová, Miroslav Dovica, Eduard Jakubkovič and Peter Sedlačko. Condition Evaluation of Optical Position Sensor. Journal of Automation and Control. 2017; 5(2):37-40. doi: 10.12691/automation-5-2-1

Abstract

Paper deals with experimental identification of condition of optical position sensor. Optical sensor can be sensitive to reflection surface on measured object. Measurement uncertainty is also evaluated.

Keywords:
sensor position uncertainty condition

Creative CommonsThis work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

References:

[1]  Acuity. Schmitt Industries, Inc. Principles Of Measurement Used By Laser Sensors. cited 11-02-2017. Available online: https://www.acuitylaser.com/measurement-principles.
 
[2]  EAL R2:1997 Expression Of The Uncertainty Of Measurement In Calibration.
 
[3]  A. M. Pawlak: Sensors and Actuators in Mechatronics. CRC Press. Taylor & Francis Group. 2007. Boca Raton. ISBN 0-8493-9013-3. 409s.
 
[4]  S. Soloman: Sensors Handbook. Second Edition. The McGraw-Hill Companies, Inc. 2010. 1424p.
 
[5]  EA-4/02 Expression of the Uncertainty of Measurement in Calibration. European co-operation Accreditation Publication Reference. December 1999.
 
[6]  L. JURIŠICA, A. VITKO, F. DUCHOŇ, D. KAŠTAN, Statistical Approach to GPS Positioning of Mobile Robot. In: Control Engineering and Applied Informatics. 2010, Vol. 12, No. 2, p. 44-51.
 
[7]  A. VITKO, L. JURIŠICA, M. KĽÚČIK, R. MURÁR, F. DUCHOŇ, Sensor Integration and Context Detection in Mechatronic Systems. In: Mechatronika 2008: Proceedings of 11th International Conference on Mechatronics. Slovakia, Trenčianske Teplice, June 4-6, 2008. - Trenčín: Trenčianska univerzita Alexandra Dubčeka v Trenčíne, 2008. - ISBN 978-80-8075-305-4. - p. 49-53
 
[8]  D. Koniar, L. Hargaš and M. Hrianka, Application of standard DICOM in LabVIEW, Proc. of 7th conf. Trends in Biomedical Engineering, Kladno 11-13. 9. 2007.
 
[9]  A. Vitko, L. Jurišica, M. Kľúčik, R. Murár, F. Duchoň,: Embedding Intelligence Into a Mobile Robot. In: AT&P Journal Plus. ISSN 1336-5010. Č. 1 : Mobilné robotické systémy (2008), s. 42-44
 
[10]  P. Božek, Robot path optimization for spot welding applications in automotive industry, Tehnicki vjesnik / Technical Gazette. Sep/Oct2013, Vol. 20 Issue 5, p913-917. 5p.
 
[11]  F. Duchoň, A. Babinec, M. Kajan, P. Beňo, M. Florek, T. Fico, L. Jurišica, Path planning with modified A star algorithm for a mobile robot, Procedia Engineering 96, 59-69
 
[12]  P. Pásztó, P. Hubinský, Mobile robot navigation based on circle recognition, Journal of Electrical Engineering 64 (2), 84-91
 
[13]  I. V. Abramov, Y. R. Nikitin, A. I. Abramov, E. V. Sosnovich, P. Božek, Control and Diagnostic Model of Brushless DC Motor, Journal of Electrical Engineering. Volume 65, Issue 5, Pages 277-282, 2014.
 
[14]  D. Koniar, L. Hargaš, S. Štofan, Segmentation of Motion Regions for Biomechanical Systems, Procedia Engineering, Volume 48, 2012, Pages 304-311
 
[15]  Ľ. Miková, M. Kelemen, F. Trebuňa, I. Virgala, S. Medvecká-Beňová, experimental identification of piezo actuator characteristic. Metalurgija 54 (2015) 1, 221-223.
 
[16]  Fatikow, S. & Rembold. U., Microsystem Technology and Microrobotics. Berlin Heidelberg, Springer-Verlag, (1997).
 
[17]  V. Chudý, R. Palenčár, E. Kureková, M. Halaj,: Measurement of technical quantities (in Slovak). Vydavateľstvo STU, 1st. ed., 1999.
 
[18]  JCGM 100 - Evaluation of measurement data - Guide to the expression of uncertainty in measurement (ISO/IEC Guide 98-3). First edition September 2008. Available online: http://www.iso.org/sites/JCGM/GUM-JCGM100.htm; http://www.bipm.org/en/publications/guides/gum_print.html.
 
[19]  JCGM 104 - Evaluation of measurement data - An introduction to the "Guide to the expression of uncertainty in measurement" (ISO/IEC Guide 98-1). First edition July 2009. Available online: http://www.bipm.org/en/publications/guides/gum_print.html.
 
[20]  JCGM 200 - International vocabulary of metrology - Basic and general concepts and associated terms (VIM) 3rd edition (2008 version with minor corrections). © JCGM 2012 Available online: http://www.iso.org/sites/JCGM/VIM-JCGM200.htm.
 
[21]  F. Kreith, The Mechanical Engineering Handbook Series. CRC PRESS. New York. ISBN 0-8493-0866-6. 2508s.
 
[22]  M. Meloun, J. Militký, 2004. Statistical analysis of experimental data. (In Czech) Praha: Academia, 2004, ISBN 80-200-1254-0.
 
[23]  B. N. Taylor and C. E. Kuyatt, 1994, Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results, NIST Technical Note 1297.
 
[24]  G. Wimmer, R. Palenčár, V. Witkovský, Stochastic models of measurement. (In Slovak) Graphic Studio Ing. Peter Juriga, Ľ. Fullu 13, 841 05 Bratislava. 1st. ed., 2001.
 
[25]  R. Palencar, P. Sopkuliak, J. Palencar et al. Application of Monte Carlo Method for Evaluation of Uncertainties of ITS-90 by Standard Platinum Resistance Thermometer. Measurement Science Review. Volume: 17, Issue: 3 Pages: 108-116. Published: Jun 2017.
 
[26]  P. Sopkuliak, R. Palencar, J. Palencar, et al. Evaluation of Uncertainties of ITS-90 by Monte Carlo Method. Conference: 6th Computer Science On-Line Conference (CSOC) Location: Zlin, CZECH REPUBLIC Date: APR, 2017. CSOC2017, VOL 2 Book Series: Advances in Intelligent Systems and Computing Volume: 574 Pages: 46-56. Published: 2017.