Journal of Automation and Control
ISSN (Print): 2372-3033 ISSN (Online): 2372-3041 Website: http://www.sciepub.com/journal/automation Editor-in-chief: Santosh Nanda
Open Access
Journal Browser
Go
Journal of Automation and Control. 2015, 3(3), 127-130
DOI: 10.12691/automation-3-3-18
Open AccessArticle

Methodology for Workplace Design at Food Production Process

Marek Vagaš1, , Vladimír Baláž1, Lucia Koukolová1 and Jozef Putala2

1Department of Robotics, Faculty of mechanical engineering, Technical University of Košice, Slovakia

2Matador Industries, a. s., General engineering & Automatization, Dubnica n. Váhom, Slovakia

Pub. Date: December 15, 2015

Cite this paper:
Marek Vagaš, Vladimír Baláž, Lucia Koukolová and Jozef Putala. Methodology for Workplace Design at Food Production Process. Journal of Automation and Control. 2015; 3(3):127-130. doi: 10.12691/automation-3-3-18

Abstract

This paper aims to the methodology for workplace design at food production process. Based on implementation of industrial robot into the workplace and object specification is suitable to create an effective methodology for supporting attractive workplace design with emphasis to individual phases during solution process. Article also offers mathematical output, which can be generally applied to all workplaces with regards to food production process.

Keywords:
palletization production methodology process food

Creative CommonsThis work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

Figures

Figure of 4

References:

[1]  Tolnay, M., Bachratý, M.: Prevádzka a údržba výrobných systémov. 1. vyd., Bratislava: FX s.r.o., 2008.
 
[2]  Semjon, M., Hajduk, M., Vagaš, M.: Koncipovanie výrobných systémov na báze zlučiteľných modulov, in: Robotics and Intelligent Manufacturing Systems: zborník príspevkov z medzinárodnej konferencie: 27. jún 2013, Košice., TU, 2013 pp. 19-24.
 
[3]  Binka, J., Hricko, J.: Compliant Mechanisms Exploited as Micro-Grippers. In: State-of-the-Art in Mechatronics, Volume II. Alpen aan den Rijn, 2010. Pp.119-144.
 
[4]  Taranenko G, Taranenko W, Świć A, Szabelski J. Modelling of dynamic systems of low-rigidity shaft machining. Eksploatacja i Niezawodnosc – Maintenance and Reliability 2010; 4 (48): 4-15.
 
[5]  Beniak, J., Križan, P.,Matúš, M., Kováčová, M.: The operating load of a disintegration machine. In: Acta Polytechnica. Vol. 54, No. 1 (2014), s. 1-5.