American Journal of Mechanical Engineering
ISSN (Print): 2328-4102 ISSN (Online): 2328-4110 Website: http://www.sciepub.com/journal/ajme Editor-in-chief: Kambiz Ebrahimi, Dr. SRINIVASA VENKATESHAPPA CHIKKOL
Open Access
Journal Browser
Go
American Journal of Mechanical Engineering. 2017, 5(6), 325-328
DOI: 10.12691/ajme-5-6-19
Open AccessArticle

Proposal of Methodology for Determination of Stresses around Groove by Photo Stress Method

František Trebuňa1, Ján Kostka1, , Miroslav Pástor1, Patrik Šarga1 and Peter Frankovský1

1Technical University of Košice, Faculty of Mechanical Engineering, Košice, Slovakia

Pub. Date: December 15, 2017

Cite this paper:
František Trebuňa, Ján Kostka, Miroslav Pástor, Patrik Šarga and Peter Frankovský. Proposal of Methodology for Determination of Stresses around Groove by Photo Stress Method. American Journal of Mechanical Engineering. 2017; 5(6):325-328. doi: 10.12691/ajme-5-6-19

Abstract

The aim of the paper is to propose a new methodology for verifying residual and operational stresses, determined by the drilling method. The newly proposed methodology will be based on the use of optical methods for total surface deformations and stress analysis through optically sensitive material applied to the surface of the object being investigated.

Keywords:
residual stresses ring-core method photo stress

Creative CommonsThis work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

Figures

Figure of 11

References:

[1]  F TREBUŇA, F. - ŠIMČÁK, F. - Bocko, J. - Pástor, M.: Analysis of causes of casting pedestal failures and the measures for increasing its residual lifetime. In: Engineering Failure Analysis. Vol. 29 (2013), p. 27-37. - ISSN 1350-6307.
 
[2]  TREBUŇA, F. - ŠIMČÁK, F. - Bocko, J. - Trebuňa, P. - Pástor, M. - Šarga, P.: Analysis of crack initiation in the press frame and innovation of the frame to ensure its further operation. In: Engineering Failure Analysis. Vol. 18, no. 1 (2011), p. 244-255. - ISSN 1350-6307.
 
[3]  TREBUŇA, F. - ŠIMČÁK, F.: Príručka experimentálnej mechaniky. TypoPress, Košice, 2007.
 
[4]  TREBUŇA , F. - ŠIMČÁK, F.: Kvantifikácia zvyškových napätí tenzometrickými metódami. Technická univerzita, Košice, 2005
 
[5]  ASTM E 837-13: Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method; https://www.astm.org/Standards/E837.htm.
 
[6]  CÁRDENAS-GARCÍA, J. F. - HASHEMI, J. - DURELLI, A. J.: The practical use of the hole method in photoelasticity. In: Mechanics Research Communications. Vol. 22, No. 3, pp. 239-244 (1995).
 
[7]  ERRAPART, A. - ANTON, J.: Photoelastic residual stress measurement in nonaxisymmetric glass containers. In: EPJ Web of Conferences 6, 32008 (2010).
 
[8]  LEE, Y. C. - LIU, T. S. - WU, C. I. - LIN, W. Y.: Investigation on residual stress and stress-optical coefficient for flexible electronics by photoelasticity. In: Measurement 45 (2012). 311-316.
 
[9]  FRANKOVSKÝ,P. - TREBUŇA, F. - OSTERTAG, O. - ŠARGA, P. - DELYOVÁ, I. - KOSTKA, J.: Utilisation Possibilities of PhotoStress Method in Determination of Residual Stresses. Applied Mechanics and Materials. Vol. 732 (2015) pp. 3-8.