American Journal of Mechanical Engineering
ISSN (Print): 2328-4102 ISSN (Online): 2328-4110 Website: http://www.sciepub.com/journal/ajme Editor-in-chief: Kambiz Ebrahimi, Dr. SRINIVASA VENKATESHAPPA CHIKKOL
Open Access
Journal Browser
Go
American Journal of Mechanical Engineering. 2015, 3(6), 244-247
DOI: 10.12691/ajme-3-6-18
Open AccessArticle

Vibration of Mechanical System Using MSC Adams Software

Marek Moravič1, , Darina Hroncová2 and Oskar Ostertag3

1Department of Construction, Automotive and Transport Engineering, Faculty of Mechanical Engineering, Technical University of Košice, Košice, Slovak republic

2Department of Mechatronics, Faculty of Mechanical Engineering, Technical University of Košice, Košice, Slovak republic

3Department of Applied Mechanics and Mechanical Engineering, Faculty of Mechanical Engineering, Technical University of Košice, Košice, Slovak republic

Pub. Date: December 17, 2015

Cite this paper:
Marek Moravič, Darina Hroncová and Oskar Ostertag. Vibration of Mechanical System Using MSC Adams Software. American Journal of Mechanical Engineering. 2015; 3(6):244-247. doi: 10.12691/ajme-3-6-18

Abstract

This article numerically solves vertical oscillating of mechanical system of vehicle by kinematic excitation. When simulating in program MSC Adams, 3D model without gravity impact was taken into consideration. Three-dimensional model of mechanical system was replaced by simple solid table. The result of the work is creation of complex instruction of vertical vibration in program MSD Adams/View that is intended for didactic purposes.

Keywords:
MSC Adams step simulation vibration multi-body model

Creative CommonsThis work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

Figures

Figure of 6

References:

[1]  Šarga, P., Hroncová, D., “Kinematic Analysis Planar Mechanism of a Pump Using MSC Adams”, in Applied Mechanics and Materials, 611. 98-106. Aug.2014.
 
[2]  Delyová, I., Hroncová, D., Sivák, P., Beliško, M., “The Dynamic Analysis of Cam Mechanism,” in American Journal of Mechanical Engineering, 1(7). 266-270. 2013.
 
[3]  Moravič, M., Computer Modelling of the Suspension of the Running Gear (in Slovak), Diploma thesis, Technical University of Košice, Faculty of Mechanical Engineering, 2013.