American Journal of Mechanical Engineering
ISSN (Print): 2328-4102 ISSN (Online): 2328-4110 Website: http://www.sciepub.com/journal/ajme Editor-in-chief: Kambiz Ebrahimi, Dr. SRINIVASA VENKATESHAPPA CHIKKOL
Open Access
Journal Browser
Go
American Journal of Mechanical Engineering. 2019, 7(4), 188-194
DOI: 10.12691/ajme-7-4-5
Open AccessArticle

Experimental Study on the Effect of Bore Up, Stroke Up, and the Use of Valves on 105 cc Engine Perfomance

Rochmad Novian Inderanata1, , Thomas Sukardi1 and Slamet Priyanto2

1Mechanical Engineering Education, Yogyakarta State University, Yogyakarta, Indonesia

2Mechanical Engineering Education, Sarjanawiyata Tamansiswa University, Yogyakarta, Indonesia

Pub. Date: November 28, 2019

Cite this paper:
Rochmad Novian Inderanata, Thomas Sukardi and Slamet Priyanto. Experimental Study on the Effect of Bore Up, Stroke Up, and the Use of Valves on 105 cc Engine Perfomance. American Journal of Mechanical Engineering. 2019; 7(4):188-194. doi: 10.12691/ajme-7-4-5

Abstract

On a 4-stroke engine, valve work and function have a very big influence on engine performance and characteristics. To improve engine performance, one of them is by way of bore up. This study aims to determine and compare the performance of a standard 4 stroke 105 cc engine before and after bore ups, stroke ups and the use of racing valves in testing power (P), torque (T) and fuel consumption (mf). This research method uses a 4 stroke 105 cc standard engine and a 150 cc bore up engine with a variety of standard and racing valves. The testing method uses the throttle method spontaneously from 4000 rpm to 1100 rpm and the throttle method per 1000 rpm from 4000 rpm then is increased to 8000 rpm gradually. Data taken in this study are torque (T), power (P), and fuel consumption (mf). The results showed that by changing the volume of the cylinder (bore up) by using variations of the racing valve can significantly improve engine performance. The average value of the percentage increase in torque power and fuel consumption compared to the results on a standard 4-stroke engine. On a standard 105 cc engine for 8000 rpm engine speed, 4.63 (N.m) of torque, 3.90 (kW) of power obtained and 0.879 (kg/h) of fuel consumption. In a semi racing engine at 8000 rpm, torque is 9.45 (N.m)(104,10%), power is 8.13 (kW)(108,46%) and fuel consumption is 1.118 (kg/h)(27%). In a full 150 cc racing engine for 8000 rpm engine speed the torque is 12.87 (N.m)(177,97%), the power is 10.79 (kW)(176,67) and fuel consumption is 1.116 (kg/h)(26,96%).

Keywords:
bore up stroke up intake valve exhaust valve throttle

Creative CommonsThis work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

Figures

Figure of 8

References:

[1]  Statistical Data Center, 2019, Development of the Number of Motorized Vehicles.
 
[2]  MoT, 2018, Regulation of the Minister of Transportation of the Republic of Indonesia, pp 2-4.
 
[3]  Lestari, DS., Darlius, IS., 2018, Upaya Meningkatkan Performa Mesin Yamaha Vega R Dengan Melakukan Bore Up Dan Stroke Up, Jurnal Pendidikan Teknik Mesin, Volume 5, Nomor 1, Mei 2018.
 
[4]  Majedi, F., Puspitasari, Indah., 2017, Optimasi Daya dan Torsi pada Motor 4 Tak dengan Modifikasi Crankshaft dan Porting pada Cylinder Head, Jurnal Teknologi Terpadu Vol. 5 No. 1 April 2017.
 
[5]  Brinnen, M., Laggar, G., 2016, New Cutting Tool Concept For Cylinder Boring, Uppsala Universitet.
 
[6]  Xu, ChangChun., Cho, HaengMuk., 2017, The Analysis of Influence of Throttle Body on Engine Intake System, International Journal of Engineering and Technology (IJET).
 
[7]  Gupta, HN., 2013, Fundamental of Internal Combustion Engine, Delhi: PHI Learning Private. Ltd.
 
[8]  Daryanto, 2011, Prinsip Dasar Mesin Otomotif, Bandung: Alfabeta.