American Journal of Mechanical Engineering
ISSN (Print): 2328-4102 ISSN (Online): 2328-4110 Website: http://www.sciepub.com/journal/ajme Editor-in-chief: Kambiz Ebrahimi, Dr. SRINIVASA VENKATESHAPPA CHIKKOL
Open Access
Journal Browser
Go
American Journal of Mechanical Engineering. 2013, 1(7), 313-317
DOI: 10.12691/ajme-1-7-32
Open AccessArticle

Analysis of Measuring Chain for Evaluating Residual Stresses by Ring-Core Method

Patrik Šarga1, and František Menda1

1Department of Applied Mechanics and Mechatronics, Technical university in Košice, Faculty of Mechanical Engineering, Letná 9, 042 01 Košice, Slovakia

Pub. Date: November 15, 2013

Cite this paper:
Patrik Šarga and František Menda. Analysis of Measuring Chain for Evaluating Residual Stresses by Ring-Core Method. American Journal of Mechanical Engineering. 2013; 1(7):313-317. doi: 10.12691/ajme-1-7-32

Abstract

In this article we describe the parts of measuring string used for residual stress calculations by Ring-Core method. Correct design and usage of the measuring chain is very important for successful measurement and the accurate data acquisition. Therefore it is sufficient to pay adequate attention to this problem before the experimental testing itself.

Keywords:
residual stresses Ring-Core method measuring chain

Creative CommonsThis work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

Figures

Figure of 18

References:

[1]  Civín, A: Komplexní teoretická analýza metody sloupku pro zjišťováni zbytkových napätí, Rigorózni práce, 2010.
 
[2]  Civín, A, Vlk, M: Theoretical Analysis of Ring-core Method for Residual Strees Detemination, ANSYS 2009.
 
[3]  Valentini, E., Benincasa, A., Bertelli, L.: An automatic system for measuring residual stresses by the Ring-Core method, 40th national convention, University of Palermo, 2011.
 
[4]  Trebuňa, F, šimčák, F: Príručka experimentálnej mechaniky, Košice 2007, TypoPress, 1526 str.
 
[5]  SINT TECHNOLOGY, Ring-core operating and maintenance, Manual, Callenzo - Italia, 2012.
 
[6]  SINT TECHNOLOGY - Center of Excellence in Measurement [online], http://www.sintechnology.com/.
 
[7]  Hottinger Baldwin Messtechnik GmbH - meracia technika, [online], http://www.hbm.com.