American Journal of Mechanical Engineering
ISSN (Print): 2328-4102 ISSN (Online): 2328-4110 Website: http://www.sciepub.com/journal/ajme Editor-in-chief: Kambiz Ebrahimi, Dr. SRINIVASA VENKATESHAPPA CHIKKOL
Open Access
Journal Browser
Go
American Journal of Mechanical Engineering. 2013, 1(7), 194-197
DOI: 10.12691/ajme-1-7-8
Open AccessArticle

Use of Safety Light Curtains in Mechatronic Systems

Ján Ivanka1,

1Department of Security Engineering, Tomas Bata University in Zlín, Czech Republic

Pub. Date: November 25, 2013

Cite this paper:
Ján Ivanka. Use of Safety Light Curtains in Mechatronic Systems. American Journal of Mechanical Engineering. 2013; 1(7):194-197. doi: 10.12691/ajme-1-7-8

Abstract

The article describes some of the aspects of how the optosensors and laser scanners can be used in the field of security of protected areas and safety fields. The article presents some of the applied possibilities of measuring on spherical area using transmission formulas for gaining data and actual setting of active elements of the optosensors and laser scanners for the environment in a 3D application mechatronic system.

Keywords:
laser scanner optical electric sensors position location system

Creative CommonsThis work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

Figures

Figure of 1

References:

[1]  Forcek,V.: Numerical simulations of problems occurring in near-field and measurements. 7th Colloquium on Laser Communication, Belgium, 2004, pp. 422-481.
 
[2]  Yaghjian, A. D.: Near-field measurements on a cylindrical surface: A source scattering-matrix formulation. National Bureau of Standards Technical Note 696. Boulder, 45-58, Sep. 2006.
 
[3]  Newell, A. C. - Lee, D.: Application of the NIST 18 term errormodel to cylindrical near-filed field measurements. Antenna Measurement Techniques Association Conference, Oct. 2000.
 
[4]  Repjar, A. G. - Newell, A. C. - Francis, M. H.: Accurate determination of planar near-field correction parameters for linearly polarized probes. IEEE Trans. Antennas Prop., AP-36, N. 6, pp. 855-768.
 
[5]  Press, W. H. a col.: Numerical recipes. Cambridge, Cambridge University Press 1992.
 
[6]  Frankovský, Peter., Pástor, Miroslav., Kenderová, Mária.: Automatization of Strain and Stress Fields Assessment Based on the Principles of Reflection Photoelasticity. In: EAN 2012 : Proceedings of the 50th annual conference on experimental stress analysis. - Praha : Czech Technical University of Prague, 2012.
 
[7]  Valouch, Jan. Electromagnetic Compatibility of Alarm Systems - Legislative and Technical Requirements. In: Security Magazin. Issue No 106, 2/2012. Praha: Security Media, 2012. p. 32-36.