American Journal of Mechanical Engineering
ISSN (Print): 2328-4102 ISSN (Online): 2328-4110 Website: http://www.sciepub.com/journal/ajme Editor-in-chief: Kambiz Ebrahimi, Dr. SRINIVASA VENKATESHAPPA CHIKKOL
Open Access
Journal Browser
Go
American Journal of Mechanical Engineering. 2019, 7(1), 9-19
DOI: 10.12691/ajme-7-1-2
Open AccessReview Article

Complete Design and Assemble of Wind Turbine Bald

Mohammed Y. Abdellah1, 2, , Mohammad Sh. Alazemi1, Ahmed F. Mohamed3, 2 and G. Tag Abdel-Jaber1

1Mechanical Engineering department, Faculty of Engineering, South Valley University, Qena, Egypt

2Mechanical Engineering Department, Collage of Engineering and Islamic Architecture, Umm Al-Qura University Makkah, KSA

3Mechanical Engineering Department, Faculty of Engineering, Sohage University, Egypt

Pub. Date: February 09, 2019

Cite this paper:
Mohammed Y. Abdellah, Mohammad Sh. Alazemi, Ahmed F. Mohamed and G. Tag Abdel-Jaber. Complete Design and Assemble of Wind Turbine Bald. American Journal of Mechanical Engineering. 2019; 7(1):9-19. doi: 10.12691/ajme-7-1-2

Abstract

the feasibilities of using wind energy in the Kuwait have analyzed and investigated. The wind speed level and resources in Kuwait was investigated experimentally. The aerodynamic of the rotor of wind turbine is investigated experimentally. Aerodynamic of wind turbines is studied theoretical using Flo software based on the theoretical models. All components of wind turbine are selected and manufactured in Kuwait. The required materials for assembling rotor and main shaft were performed. The material of the turbine is investigated for stage of building and assembling.

Keywords:
feasibility-aerodynamic-wind energy-turbine

Creative CommonsThis work is licensed under a Creative Commons Attribution 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

Figures

Figure of 24

References:

[1]  E. W. Golding, generation of electricity by wind power: Spon, 1976.
 
[2]  P. A. Vine, London's lost route to the sea: an historical account of the inland navigations which linked the Thames to the English Channel: David & Charles Publishers, 1986.
 
[3]  R. Pena, J. Clare, and G. Asher, "Doubly fed induction generator using back-to-back PWM converters and its application to variable-speed wind-energy generation," IEE Proceedings-Electric power applications, vol. 143, pp. 231-241, 1996.
 
[4]  J. Beedell and T. Rehman, "Explaining farmers' conservation behaviour: Why do farmers behave the way they do?," Journal of Environmental management, vol. 57, pp. 165-176, 1999.
 
[5]  Y. M. Mohamed K. Hassan, Abu El-Ainin H, "Improvement of Al-6061 alloys mechanical properties by controlling processing parameters," International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, vol. 12, pp. 14-18, 2012.
 
[6]  Y. Mohammed, M. K. Hassan, and A. Hashem, "Analytical model to predict multiaxial laminate fracture toughness from 0 ply fracture toughness," Polymer Engineering & Science, vol. 54, pp. 234-238, 2014.
 
[7]  Y. Mohammed, M. K. Hassan, and A. Hashem, "Effect of stacking sequence and geometric scaling on the brittleness number of glass fiber composite laminate with stress raiser," Science and Engineering of Composite Materials, vol. 21, pp. 281-288, 2014.
 
[8]  M. Y. Abdellah, M. S. Alsoufi, M. K. Hassan, H. A. Ghulman, and A. F. Mohamed, "Extended finite element numerical analysis of scale effect in notched glass fiber reinforced epoxy composite," Archive of Mechanical Engineering, vol. 62, pp. 217-236, 2015.
 
[9]  K. H. Mohamed, Y. A. Mohammed, S. Azabi, K., and W. W. Marzouk, "Investigation of the Mechanical Behavior of Novel Fiber Metal Laminates," International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, vol. 15, pp. 112-118, 2015.
 
[10]  M. Y. Abdellah, "Delamination Modeling of Double Cantilever Beam of Unidirectional Composite Laminates," Failure analysis and prevention, 2017.
 
[11]  M. Y. A. Ayman M. M. Abdelhaleem, Hesham I. Fathi, Montasser Dewidar, "Mechanical Properties of ABS Embedded with Basalt Fiber Fillers," Journal for Manufacturing Science and Production, 2016.
 
[12]  M. K. Hassan, M. Y. Abdellah, S. K. Azabi, and W. Marzouk, "Fracture Toughness of a Novel GLARE Composite Material," 2015.
 
[13]  N. S. Korim, M. Y. Abdellah, M. Dewidar, and A. M. Abdelhaleem, "Crushable Finite Element Modeling of Mechanical Properties of Titanium Foam," 2015.
 
[14]  S. Mathew, Wind energy: fundamentals, resource analysis and economics vol. 1: Springer, 2006.
 
[15]  A. Hajiah, T. Khatib, K. Sopian, and M. Sebzali, "Performance of grid-connected photovoltaic system in two sites in Kuwait," International Journal of Photoenergy, vol. 2012, 2012.
 
[16]  A. Hajiah and M. Sebzali, "Optimal sizing of wind power systems in three high wind potential zones in Kuwait for remote housing electrification," International Journal of Renewable Energy Research (IJRER), vol. 3, pp. 167-171, 2013.
 
[17]  A. Hajiah, M. Sebzali, and S. Ebrahim, "Analysis of wind power potential characteristics and feasibility in Kuwait for possible electricity production," International Journal of Renewable Energy Research (IJRER), vol. 3, pp. 812-818, 2013.
 
[18]  A. Hansen and C. Butterfield, "Aerodynamics of horizontal-axis wind turbines," Annual Review of Fluid Mechanics, vol. 25, pp. 115-149, 1993.
 
[19]  P. Higgins and A. Foley, "The evolution of offshore wind power in the United Kingdom," Renewable and sustainable energy reviews, vol. 37, pp. 599-612, 2014.
 
[20]  W. Z. Shen, M. O. Hansen, and J. N. Sørensen, "Determination of angle of attack (AOA) for rotating blades," in Wind Energy, ed: Springer, 2007, pp. 205-209.
 
[21]  K. Bullis, "How Tesla is driving electric car innovation," MIT Technol. Rev., 2013.
 
[22]  N. Goudarzi and W. Zhu, "A review on the development of wind turbine generators across the world," International Journal of Dynamics and Control, vol. 1, pp. 192-202, 2013.
 
[23]  R. G. Budynas and J. K. Nisbett, Shigley's mechanical engineering design vol. 8: McGraw-Hill New York, 2008.